Jack,
I had exactly the same problem in the last K2 I built. Obvioulsy they got a
batch with shortlegged diffusers at Elecraft, hi! However it's pretty easy
to overcome this problem. My method is similar to the J-hook method by
WB7SS.
I attached the spacers to the diffuser (the leads completely flush with the
spacers) and put a thin discarded component lead into each hole. Using a
VERY SMALL amount of solder, I filled each hole with solder, using a thin
tip iron. It's enouogh to just wet each hole with solder, and there is not
room enough for any solder blobs (if so, the space between the diffuser and
bisplay board will be incorrect). You need a steady hand, a small tip iron
and patience. If solder blobs is created - clean the assembly and redo the
whole thing. When everything seems to look fine, attach the diffuser to the
display board and continue as per the K2 manual.
This worked fine for me.
73/2!
Hans / LA2MOA
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
