Re: [Elecraft] Stupidity vs Absentmindedness - Was: Killed the KPA500 :)
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Stupidity vs Absentmindedness - Was: Killed the KPA500 :)
Nope, the Tim Conway reflector. Jack Spitznagel, DDS, PhD and KD4IZ... ;@) see: https://youtu.be/bfTyEtVIe84 Sent from my iPhone > On Nov 20, 2018, at 22:42, Brian Denley wrote: > > Is this the Tim Allen reflector? :o) > > Brian Denley > KB1VBF > Sent from my iPad > >> On Nov 20, 2018, at 7:45 PM, Fred VE3FAL wrote: >> >> In my years in the radio and electronics hobby I have learnt that the magic >> smoke wants out as well >> >> Fred >> VE3FAL >> >> Sent from my iPhone >> Fred VE3FAL/CIW649 >> >> >>> On Nov 20, 2018, at 19:40, John Simmons wrote: >>> >>> Ha! I would venture to say that anyone that says they haven't done this >>> kind of thing would be fibbing. I've blown up lots of stuff: >>> >>> * When I was in high school electronics class, I wired an AC power >>> switch in some long-forgotten transmitter in PARALLEL with the power >>> line instead of SERIES. Fuse? Nah. >>> * I built a Heathkit SW receiver. I swapped the germanium diodes for >>> the RF detector with the silicon diodes for the power supply >>> rectifier. This time there was a fuse. >>> * I've put many transistors in backwards. The transistors protect the >>> fuse. >>> * Many times I've tried to work the local repeater without remembering >>> to connect the antenna to the radio. I've done this both in mobile >>> and home stations. I've never blown a final, though. >>> * Another Heathkit was a vacuum tube voltmeter. I wired all of the >>> resistors on the 10 position range switch EXACTLY one switch >>> position off. >>> * I blew up a $200 LDMOS transistor for an HF amp. I recorded the >>> whole thing on video and posted it to YouTube. I STILL don't know >>> how or why the transistor blew. RF Parts was happy to sell me >>> another one though. >>> * I had an old pickup truck that I used only for snow plowing. Both >>> battery cables were black (don't ask why). Every fall I would put >>> the battery in to prepare for the season. EVERY fall I would hook >>> the battery cables up backwards. BZZZT! >>> * I built my own house while working 60 hour weeks at a two-way radio >>> shop. I did all the electric wiring in the house. The first circuit >>> I hooked up was for basement outlets. By mistake I used the cable >>> for the water heater for the outlet string. BANG! GFI outlets don't >>> like 240V. >>> >>> That's just the electronic stuff I can remember right now. We had the >>> kitchen floor replaced THREE TIMES because the pipe for the self-installed >>> dishwasher leaked. >>> >>> Don't feel bad. >>> >>> -John NI0K >>> >>> P.S. Many, many years ago there was an article in 73 Magazine written by a >>> ham claiming that being a klutz was his specialty. He gave lots of >>> examples, but the crowning one described how he put out a fire in his car >>> (which was in the driveway) with the liquid from his septic tank that he >>> happened to be pumping at the same time. I saved the article. Every time I >>> read it I get the giggles. >>> >>> kd...@frawg.org wrote: Thanks Michael, Andy, and all for the original thread. It made me focus on proper use of my KPA500 which has really done a great job for me since I acquired it and a KAT500 over the summer. Retitled this message because I do not want to hijack/derail the original conversation. What I want to know... is there no repair for absent minded button pushing and thoughtless antenna positioning? So that I don't forget again... A hopefully instructional "mea culpa" follows: I have been using the IC-7000 for 2M APRS ops with a Diamond VX2000 vertical. Also have been experimenting with HF simplex D-Star and Free DV digital voice recently. The KPA500 has been instrumental for DV ops because of recent squirrely propagation... Mistake 1: Over the summer, I forgot to shut down the packet ops and ground 6/2/440 tri-band antenna while using a "nearby" halo with 350 watts 6M DV. That blew the 2M front end of the IC-7000. Matt at SARTS/ICOM in Michigan repaired it and I put together a protection relay circuit to ground the vertical if I forgot again. That should have solved the issue... Mistake 2: A relay contact was faulty (and I did not test it properly) and a month later, an adventure on 6M DV mode took the 7000 front end again! Matt was kind about fixing it ...again... Here I claim total stupidity along with absent mindedness - I rebuilt the protection circuit, tested it, it "seemed" to work fine... but it failed again a month later! Mistake 3: Failed, because I had removed the dummy load and *forgotten* to replace it along with a key ground strap, which again left the receiver 2M front end exposed. Kindly, Matt agreed to fix the 7000 a 3rd time... The 7000 will not go back into service until I have completely re-arranged the station set up because, to top off thi
Re: [Elecraft] Stupidity vs Absentmindedness - Was: Killed the KPA500 :)
Is this the Tim Allen reflector? :o) Brian Denley KB1VBF Sent from my iPad > On Nov 20, 2018, at 7:45 PM, Fred VE3FAL wrote: > > In my years in the radio and electronics hobby I have learnt that the magic > smoke wants out as well > > Fred > VE3FAL > > Sent from my iPhone > Fred VE3FAL/CIW649 > > >> On Nov 20, 2018, at 19:40, John Simmons wrote: >> >> Ha! I would venture to say that anyone that says they haven't done this kind >> of thing would be fibbing. I've blown up lots of stuff: >> >> * When I was in high school electronics class, I wired an AC power >> switch in some long-forgotten transmitter in PARALLEL with the power >> line instead of SERIES. Fuse? Nah. >> * I built a Heathkit SW receiver. I swapped the germanium diodes for >> the RF detector with the silicon diodes for the power supply >> rectifier. This time there was a fuse. >> * I've put many transistors in backwards. The transistors protect the >> fuse. >> * Many times I've tried to work the local repeater without remembering >> to connect the antenna to the radio. I've done this both in mobile >> and home stations. I've never blown a final, though. >> * Another Heathkit was a vacuum tube voltmeter. I wired all of the >> resistors on the 10 position range switch EXACTLY one switch >> position off. >> * I blew up a $200 LDMOS transistor for an HF amp. I recorded the >> whole thing on video and posted it to YouTube. I STILL don't know >> how or why the transistor blew. RF Parts was happy to sell me >> another one though. >> * I had an old pickup truck that I used only for snow plowing. Both >> battery cables were black (don't ask why). Every fall I would put >> the battery in to prepare for the season. EVERY fall I would hook >> the battery cables up backwards. BZZZT! >> * I built my own house while working 60 hour weeks at a two-way radio >> shop. I did all the electric wiring in the house. The first circuit >> I hooked up was for basement outlets. By mistake I used the cable >> for the water heater for the outlet string. BANG! GFI outlets don't >> like 240V. >> >> That's just the electronic stuff I can remember right now. We had the >> kitchen floor replaced THREE TIMES because the pipe for the self-installed >> dishwasher leaked. >> >> Don't feel bad. >> >> -John NI0K >> >> P.S. Many, many years ago there was an article in 73 Magazine written by a >> ham claiming that being a klutz was his specialty. He gave lots of examples, >> but the crowning one described how he put out a fire in his car (which was >> in the driveway) with the liquid from his septic tank that he happened to be >> pumping at the same time. I saved the article. Every time I read it I get >> the giggles. >> >> kd...@frawg.org wrote: >>> Thanks Michael, Andy, and all for the original thread. It made me focus on >>> proper use of my KPA500 which has really done a great job for me since I >>> acquired it and a KAT500 over the summer. >>> >>> Retitled this message because I do not want to hijack/derail the original >>> conversation. >>> >>> What I want to know... is there no repair for absent minded button pushing >>> and thoughtless antenna positioning? >>> >>> So that I don't forget again... A hopefully instructional "mea culpa" >>> follows: >>> >>> I have been using the IC-7000 for 2M APRS ops with a Diamond VX2000 >>> vertical. Also have been experimenting with HF simplex D-Star and Free DV >>> digital voice recently. The KPA500 has been instrumental for DV ops because >>> of recent squirrely propagation... >>> >>> Mistake 1: Over the summer, I forgot to shut down the packet ops and ground >>> 6/2/440 tri-band antenna while using a "nearby" halo with 350 watts 6M DV. >>> That blew the 2M front end of the IC-7000. Matt at SARTS/ICOM in Michigan >>> repaired it and I put together a protection relay circuit to ground the >>> vertical if I forgot again. That should have solved the issue... >>> >>> Mistake 2: A relay contact was faulty (and I did not test it properly) and >>> a month later, an adventure on 6M DV mode took the 7000 front end again! >>> Matt was kind about fixing it ...again... >>> >>> Here I claim total stupidity along with absent mindedness - I rebuilt the >>> protection circuit, tested it, it "seemed" to work fine... but it failed >>> again a month later! >>> >>> Mistake 3: Failed, because I had removed the dummy load and *forgotten* to >>> replace it along with a key ground strap, which again left the receiver 2M >>> front end exposed. Kindly, Matt agreed to fix the 7000 a 3rd time... >>> >>> The 7000 will not go back into service until I have completely re-arranged >>> the station set up because, to top off this comedy of errors... I totally >>> ignored one basic issue: >>> >>> Original Mistake: the vertical and halo antennas were mounted on the same >>> mast because "I never planned" to use them at the same time. This is where >>> stupidity/laziness compounded with my absent m
Re: [Elecraft] Stupidity vs Absentmindedness - Was: Killed the KPA500 :)
In my years in the radio and electronics hobby I have learnt that the magic smoke wants out as well Fred VE3FAL Sent from my iPhone Fred VE3FAL/CIW649 > On Nov 20, 2018, at 19:40, John Simmons wrote: > > Ha! I would venture to say that anyone that says they haven't done this kind > of thing would be fibbing. I've blown up lots of stuff: > > * When I was in high school electronics class, I wired an AC power > switch in some long-forgotten transmitter in PARALLEL with the power > line instead of SERIES. Fuse? Nah. > * I built a Heathkit SW receiver. I swapped the germanium diodes for > the RF detector with the silicon diodes for the power supply > rectifier. This time there was a fuse. > * I've put many transistors in backwards. The transistors protect the > fuse. > * Many times I've tried to work the local repeater without remembering > to connect the antenna to the radio. I've done this both in mobile > and home stations. I've never blown a final, though. > * Another Heathkit was a vacuum tube voltmeter. I wired all of the > resistors on the 10 position range switch EXACTLY one switch > position off. > * I blew up a $200 LDMOS transistor for an HF amp. I recorded the > whole thing on video and posted it to YouTube. I STILL don't know > how or why the transistor blew. RF Parts was happy to sell me > another one though. > * I had an old pickup truck that I used only for snow plowing. Both > battery cables were black (don't ask why). Every fall I would put > the battery in to prepare for the season. EVERY fall I would hook > the battery cables up backwards. BZZZT! > * I built my own house while working 60 hour weeks at a two-way radio > shop. I did all the electric wiring in the house. The first circuit > I hooked up was for basement outlets. By mistake I used the cable > for the water heater for the outlet string. BANG! GFI outlets don't > like 240V. > > That's just the electronic stuff I can remember right now. We had the kitchen > floor replaced THREE TIMES because the pipe for the self-installed > dishwasher leaked. > > Don't feel bad. > > -John NI0K > > P.S. Many, many years ago there was an article in 73 Magazine written by a > ham claiming that being a klutz was his specialty. He gave lots of examples, > but the crowning one described how he put out a fire in his car (which was in > the driveway) with the liquid from his septic tank that he happened to be > pumping at the same time. I saved the article. Every time I read it I get the > giggles. > > kd...@frawg.org wrote: >> Thanks Michael, Andy, and all for the original thread. It made me focus on >> proper use of my KPA500 which has really done a great job for me since I >> acquired it and a KAT500 over the summer. >> >> Retitled this message because I do not want to hijack/derail the original >> conversation. >> >> What I want to know... is there no repair for absent minded button pushing >> and thoughtless antenna positioning? >> >> So that I don't forget again... A hopefully instructional "mea culpa" >> follows: >> >> I have been using the IC-7000 for 2M APRS ops with a Diamond VX2000 >> vertical. Also have been experimenting with HF simplex D-Star and Free DV >> digital voice recently. The KPA500 has been instrumental for DV ops because >> of recent squirrely propagation... >> >> Mistake 1: Over the summer, I forgot to shut down the packet ops and ground >> 6/2/440 tri-band antenna while using a "nearby" halo with 350 watts 6M DV. >> That blew the 2M front end of the IC-7000. Matt at SARTS/ICOM in Michigan >> repaired it and I put together a protection relay circuit to ground the >> vertical if I forgot again. That should have solved the issue... >> >> Mistake 2: A relay contact was faulty (and I did not test it properly) and >> a month later, an adventure on 6M DV mode took the 7000 front end again! >> Matt was kind about fixing it ...again... >> >> Here I claim total stupidity along with absent mindedness - I rebuilt the >> protection circuit, tested it, it "seemed" to work fine... but it failed >> again a month later! >> >> Mistake 3: Failed, because I had removed the dummy load and *forgotten* to >> replace it along with a key ground strap, which again left the receiver 2M >> front end exposed. Kindly, Matt agreed to fix the 7000 a 3rd time... >> >> The 7000 will not go back into service until I have completely re-arranged >> the station set up because, to top off this comedy of errors... I totally >> ignored one basic issue: >> >> Original Mistake: the vertical and halo antennas were mounted on the same >> mast because "I never planned" to use them at the same time. This is where >> stupidity/laziness compounded with my absent minded operating practices to >> create the "perfect storm". Until I started using the KPA500, the halo >> antenna field strength was not such that the 7000's 2M receiver section was >> stressed by the signal strength from
Re: [Elecraft] Stupidity vs Absentmindedness - Was: Killed the KPA500 :)
Ha! I would venture to say that anyone that says they haven't done this kind of thing would be fibbing. I've blown up lots of stuff: * When I was in high school electronics class, I wired an AC power switch in some long-forgotten transmitter in PARALLEL with the power line instead of SERIES. Fuse? Nah. * I built a Heathkit SW receiver. I swapped the germanium diodes for the RF detector with the silicon diodes for the power supply rectifier. This time there was a fuse. * I've put many transistors in backwards. The transistors protect the fuse. * Many times I've tried to work the local repeater without remembering to connect the antenna to the radio. I've done this both in mobile and home stations. I've never blown a final, though. * Another Heathkit was a vacuum tube voltmeter. I wired all of the resistors on the 10 position range switch EXACTLY one switch position off. * I blew up a $200 LDMOS transistor for an HF amp. I recorded the whole thing on video and posted it to YouTube. I STILL don't know how or why the transistor blew. RF Parts was happy to sell me another one though. * I had an old pickup truck that I used only for snow plowing. Both battery cables were black (don't ask why). Every fall I would put the battery in to prepare for the season. EVERY fall I would hook the battery cables up backwards. BZZZT! * I built my own house while working 60 hour weeks at a two-way radio shop. I did all the electric wiring in the house. The first circuit I hooked up was for basement outlets. By mistake I used the cable for the water heater for the outlet string. BANG! GFI outlets don't like 240V. That's just the electronic stuff I can remember right now. We had the kitchen floor replaced THREE TIMES because the pipe for the self-installed dishwasher leaked. Don't feel bad. -John NI0K P.S. Many, many years ago there was an article in 73 Magazine written by a ham claiming that being a klutz was his specialty. He gave lots of examples, but the crowning one described how he put out a fire in his car (which was in the driveway) with the liquid from his septic tank that he happened to be pumping at the same time. I saved the article. Every time I read it I get the giggles. kd...@frawg.org wrote: Thanks Michael, Andy, and all for the original thread. It made me focus on proper use of my KPA500 which has really done a great job for me since I acquired it and a KAT500 over the summer. Retitled this message because I do not want to hijack/derail the original conversation. What I want to know... is there no repair for absent minded button pushing and thoughtless antenna positioning? So that I don't forget again... A hopefully instructional "mea culpa" follows: I have been using the IC-7000 for 2M APRS ops with a Diamond VX2000 vertical. Also have been experimenting with HF simplex D-Star and Free DV digital voice recently. The KPA500 has been instrumental for DV ops because of recent squirrely propagation... Mistake 1: Over the summer, I forgot to shut down the packet ops and ground 6/2/440 tri-band antenna while using a "nearby" halo with 350 watts 6M DV. That blew the 2M front end of the IC-7000. Matt at SARTS/ICOM in Michigan repaired it and I put together a protection relay circuit to ground the vertical if I forgot again. That should have solved the issue... Mistake 2: A relay contact was faulty (and I did not test it properly) and a month later, an adventure on 6M DV mode took the 7000 front end again! Matt was kind about fixing it ...again... Here I claim total stupidity along with absent mindedness - I rebuilt the protection circuit, tested it, it "seemed" to work fine... but it failed again a month later! Mistake 3: Failed, because I had removed the dummy load and *forgotten* to replace it along with a key ground strap, which again left the receiver 2M front end exposed. Kindly, Matt agreed to fix the 7000 a 3rd time... The 7000 will not go back into service until I have completely re-arranged the station set up because, to top off this comedy of errors... I totally ignored one basic issue: Original Mistake: the vertical and halo antennas were mounted on the same mast because "I never planned" to use them at the same time. This is where stupidity/laziness compounded with my absent minded operating practices to create the "perfect storm". Until I started using the KPA500, the halo antenna field strength was not such that the 7000's 2M receiver section was stressed by the signal strength from vertical, so I got complacent. Add in the KPA500 and smoke is let out of Q551 in the IC-7000. I am *sure* that no one on this group does this sort of sloppy engineering, but let it serve as a not-so-subtle reminder that a station layout should not be organically grown, but should be planned carefully with this sort of damaging interaction in mind. Enjoy the laugh at my expense. KD4IZ Jack Spitznagel F
[Elecraft] Stupidity vs Absentmindedness - Was: Killed the KPA500 :)
Thanks Michael, Andy, and all for the original thread. It made me focus on proper use of my KPA500 which has really done a great job for me since I acquired it and a KAT500 over the summer. Retitled this message because I do not want to hijack/derail the original conversation. What I want to know... is there no repair for absent minded button pushing and thoughtless antenna positioning? So that I don't forget again... A hopefully instructional "mea culpa" follows: I have been using the IC-7000 for 2M APRS ops with a Diamond VX2000 vertical. Also have been experimenting with HF simplex D-Star and Free DV digital voice recently. The KPA500 has been instrumental for DV ops because of recent squirrely propagation... Mistake 1: Over the summer, I forgot to shut down the packet ops and ground 6/2/440 tri-band antenna while using a "nearby" halo with 350 watts 6M DV. That blew the 2M front end of the IC-7000. Matt at SARTS/ICOM in Michigan repaired it and I put together a protection relay circuit to ground the vertical if I forgot again. That should have solved the issue... Mistake 2: A relay contact was faulty (and I did not test it properly) and a month later, an adventure on 6M DV mode took the 7000 front end again! Matt was kind about fixing it ...again... Here I claim total stupidity along with absent mindedness - I rebuilt the protection circuit, tested it, it "seemed" to work fine... but it failed again a month later! Mistake 3: Failed, because I had removed the dummy load and *forgotten* to replace it along with a key ground strap, which again left the receiver 2M front end exposed. Kindly, Matt agreed to fix the 7000 a 3rd time... The 7000 will not go back into service until I have completely re-arranged the station set up because, to top off this comedy of errors... I totally ignored one basic issue: Original Mistake: the vertical and halo antennas were mounted on the same mast because "I never planned" to use them at the same time. This is where stupidity/laziness compounded with my absent minded operating practices to create the "perfect storm". Until I started using the KPA500, the halo antenna field strength was not such that the 7000's 2M receiver section was stressed by the signal strength from vertical, so I got complacent. Add in the KPA500 and smoke is let out of Q551 in the IC-7000. I am *sure* that no one on this group does this sort of sloppy engineering, but let it serve as a not-so-subtle reminder that a station layout should not be organically grown, but should be planned carefully with this sort of damaging interaction in mind. Enjoy the laugh at my expense. KD4IZ Jack Spitznagel FM19oo -Original Message- From: Michael Walker Sent: Monday, November 19, 2018 19:52 To: ANDY DURBIN Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] Killed the KPA500 :) Knowing what I did while transmitting at 100 watts of msk144, I’m surprised the damage isn’t worse. The protection circuits did the best they could of. If you own any amp, you always need to be aware of the risk. I would never rely on the automation to 100% protected any amp. If you are worried about your amplifier and anyway I highly recommend you have checklist handy every time you turn it on and change Bands. Never depend on the protection circuits. I know I’m preaching to the choir too many people, however it is imperative you understand exactly how your amp works, how it’s wired, and how it interfaces with any HF radio. Mike va3mw Sent from my iPad > On Nov 19, 2018, at 6:45 PM, ANDY DURBIN wrote: > > "The support team at Elecraft got back to me and the required parts to repair > the board are on the way. Nice job guys." > > > But the question remains - Why didn't the designed-in protections work? This > new KPA500 owner would appreciate an answer from Elecraft. > > > Andy, k3wyc > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > va...@portcredit.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
