Sounds like the CONFIG KXV3 menu item got set to TEST. This routes all the
RF to the xverter BNC outputs at low power. See page 49 of the current
manual. Restoring your configuration probably corrected it.
73
Greg
AB7R
On Sun, Feb 27, 2011 at 10:21 AM, Paul VanOveren n...@wolphi.com wrote:
All of a sudden my K3 # 758 is acting weird. It recognizes the ATU in
that
the little ATU is present on the display, but no signals are received in
the
radio, only a hiss. If I try to adjust the power setting it will read
from 0.10mw and - 10.0 db to 1.5 mw and 1.8 db on the display, it stays
there for only a second or two and then the display return s to normal.
Altho the atu is showing on the display and I tap the tune button, the
display changes to NO ATU and the normal clicking sounds is not there.
When I hold the XMT button to perform the Tune function, the display
changes
to 1.8 db and 1.5 mw rather than the swr and power, it does change to the
cw
mode however.
This all happened after I unhooked the rs232 cable from the back of the K3
so I could plug in my Yamaha CM-500 headset, which I removed for a day.
Just
for grins I went to the K3 Utility and did the resore K3 configuration
button. Presto, signals back, power control normal, ATU clicking again,
Tune
fuction reading swr and power...I am so glad, but can anyone tell me why
removing the cable from the laptop to the K3 evidently corrupted something?
Sincerly,
NF8J
Paul VanOveren
5911 Snow Ave.
Alto, Mi
616-868-7149
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html