Re: [Elecraft] WTB: 10-MHz Test Oscillator Wanted
Keep an eye out on the "e=place"!! Look for a Measurements Corporation Model 111 crystal calibrator. They can be zeroed to WWV and stay within just a few parts per million if kept on all the time. I have seen them quite cheap at time there. Excellent little oscillator. 73, Sandy W5TVW - Original Message - From: "Alan D. Wilcox" <[EMAIL PROTECTED]> To: "elecraft" Sent: Wednesday, July 16, 2008 4:47 PM Subject: [Elecraft] WTB: 10-MHz Test Oscillator Wanted Hello, Want 10-MHz crystal oscillator that puts out a volt or so for frequency counter calibration check. Must have cap to set freq zeroed onto WWV for a few minutes operation; no long-term stability required. Something like the XG1 ... battery, BNC, not fancy. Thought this would be simple search ... a kit-builder's project. Guess nobody's making such a kit. Anybody have or know where to get? Thanks, Alan -- Alan D. Wilcox, W3DVX 570-321-1516 http://WilcoxEngineering.com Williamsport, PA 17701 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.138 / Virus Database: 270.5.0/1555 - Release Date: 7/16/2008 6:43 AM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] WTB: 10-MHz Test Oscillator Wanted
Don, The XG1 output isn't enough signal for the scope (and its output, which is connected to my freq counter). No adjustment cap either. http://www.aade.com/newfreq/new%20freq.htm does have merit. If there's a cap in there to tweak at some future time, then it should do the trick. Thanks, Alan-- Alan D. Wilcox, W3DVX 570-321-1516 http://WilcoxEngineering.com Williamsport, PA 17701 Don Wilhelm wrote: Alan, Why not just build an XG1 and put a 10 MHz crystal in it - it will only do -73 dBm output as a stock item, but I am certain you could run it through an amplifier. Of course, there is always the AADE frequency standard that claim 1ppm long term accuracy. 73, Don W3FPR Alan D. Wilcox wrote: Hello, Want 10-MHz crystal oscillator that puts out a volt or so for frequency counter calibration check. Must have cap to set freq zeroed onto WWV for a few minutes operation; no long-term stability required. Something like the XG1 ... battery, BNC, not fancy. Thought this would be simple search ... a kit-builder's project. Guess nobody's making such a kit. Anybody have or know where to get? Thanks, Alan ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] WTB: 10-MHz Test Oscillator Wanted
Alan, take a look at this: http://kitsandparts.com/fref.php 73, Dick, W0NTA Greeley, CO Alan D. Wilcox wrote: > > Hello, > > Want 10-MHz crystal oscillator that puts out a volt or so for frequency > counter calibration check. > > Must have cap to set freq zeroed onto WWV for a few minutes operation; > no long-term stability required. > Something like the XG1 ... battery, BNC, not fancy. > > Thought this would be simple search ... a kit-builder's project. Guess > nobody's making such a kit. > > Anybody have or know where to get? > > Thanks, > Alan > > -- > Alan D. Wilcox, W3DVX > 570-321-1516 > http://WilcoxEngineering.com > Williamsport, PA 17701 > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > -- View this message in context: http://n2.nabble.com/WTB%3A-10-MHz-Test-Oscillator-Wanted-tp532266p532331.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] WTB: 10-MHz Test Oscillator Wanted
> Want 10-MHz crystal oscillator that puts out a volt or so for frequency > counter calibration check. > Alan, M3 Electronix, Inc has such an item that they have for sale as a completed item. Used in calibrating their FPM-1 Frequency Counter/Power Meter Kit. Also you might want to look for an HP-10811 Crystal Oscillator that often shows up on EBay...this can be slaved with GPS for an extremely active 10 MHz standard with some additional electronics...or for more money go with a ribidium unit. www.m3electronix.com 73 Don -VE1AOE- ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] WTB: 10-MHz Test Oscillator Wanted
Hello, Want 10-MHz crystal oscillator that puts out a volt or so for frequency counter calibration check. Must have cap to set freq zeroed onto WWV for a few minutes operation; no long-term stability required. Something like the XG1 ... battery, BNC, not fancy. Thought this would be simple search ... a kit-builder's project. Guess nobody's making such a kit. Anybody have or know where to get? Thanks, Alan -- Alan D. Wilcox, W3DVX 570-321-1516 http://WilcoxEngineering.com Williamsport, PA 17701 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
