This happened several more times. I had been in PEP mode while all this happened but after I changed to average mode it has not happened again. Hope the coming firmware updates solve this issue.
NZ0T wrote: > > Interesting problem with my W2 this morning. Was on 75 for a net at about > 500 watts into (at first) a Windom and then a sloper. I have the 2KW > 1.8-54 Mhz sensor. The 2KW range on the meter stopped working - acted as > if I was in the 200W range. The other ranges also seemed shifted down > with the 200W range acting like the 20W range. Also the meter would not > turn off. Pushing the on/off button caused it to recycle but it stayed > on. Very strange. I tried reinstalling the firmware with no success. > Finally I unplugged the power cord, waited a minute, and plugged it back > in. That did it - all is fine now. Could be RF from the Windom - mine > tends to send RF back down the coax even with an RF choke in line. Anyone > else had this happen? > > 73 Bill NZ0T > -- View this message in context: http://n2.nabble.com/Weird-W2-problem-tp4156475p4167222.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html