Re: [Elecraft] Wire labeling - slightly OT (Ron W3ZV

2015-09-09 Thread Thomas Taylor 
On Tue, 8 Sep 2015 15:21:48 -0700
"Eric Swartz - WA6HHQ, Elecraft"  wrote:

> We're exceeding the OT posting limit on this one. Let's end the thread for
> now.
> 
> When an OT thread hits 5-6 posts, please try to limit additional postings as 
> much as possible to avoid the moderator's hook.. ;-)
> 
> 73,
> 
> Eric
> Modulator and
> /elecraft.com/
> 

#

Although this is OT in the sense that it is not just about Elecraft equipment,
it is about amateur radio equipment.  Perhaps it would be a good idea to have a
sub-list for such.

Newly licensed hams could then benefit from such topics as well as some of us
"experienced" rag chewers.

Thanks & 73
Tom  KG7CFC

##

> On 9/8/2015 1:42 PM, Steve Mollman via Elecraft wrote:
> > If you go the Brother P-touch route be sure you have a label maker that is
> > compatible with the Brother "TZ Flexible ID" tape.  It is supposed be a
> > special tape just for coax.  Their regular and lower end tapes such as  the
> > "M" line have trouble adhering to coax/wire insulation and will fall off in
> > a few days.  The "TZ" tape has worked fine for me.
> >
> > Steve KD9HL
> >
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kg7...@fwarc.org



-- 

When you get all full of yourself try giving orders to a cat.
  -  Anonymous

^^  --...  ...--  / -.-  --.  --...  -.-.  ..-.  -.-.


Tom Taylor  KG7CFC
openSUSE 13.1 (64-bit), Kernel 3.11.6-4-default,
KDE 4.11.2, AMD A8-7600, GeForce GTX 740 T/PCIe/
16GB RAM -- 3x1.5TB sata2 -- 128GB-SSD
FF 37.0, claws-mail 3.10.1
registered linux user 263467
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Wire labeling - slightly OT (Ron W3ZV

2015-09-08 Thread Eric Swartz - WA6HHQ, Elecraft 

We're exceeding the OT posting limit on this one. Let's end the thread for now.

When an OT thread hits 5-6 posts, please try to limit additional postings as 
much as possible to avoid the moderator's hook.. ;-)


73,

Eric
Modulator and
/elecraft.com/

On 9/8/2015 1:42 PM, Steve Mollman via Elecraft wrote:

If you go the Brother P-touch route be sure you have a label maker that is compatible with the Brother 
"TZ Flexible ID" tape.  It is supposed be a special tape just for coax.  Their regular and lower 
end tapes such as  the "M" line have trouble adhering to coax/wire insulation and will fall off in 
a few days.  The "TZ" tape has worked fine for me.

Steve KD9HL



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Wire labeling - slightly OT (Ron W3ZV

2015-09-08 Thread Steve Mollman via Elecraft 
If you go the Brother P-touch route be sure you have a label maker that is 
compatible with the Brother "TZ Flexible ID" tape.  It is supposed be a special 
tape just for coax.  Their regular and lower end tapes such as  the "M" line 
have trouble adhering to coax/wire insulation and will fall off in a few days.  
The "TZ" tape has worked fine for me.

Steve KD9HL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com