Re: [Elecraft] k3 and RTTY hookup question
You should let N1MM Logger do rig control. Assuming you have a serial cable between COM1 and your K3's RS232 jack, set the Radio command port in MMTTY to NONE and configure N1MM Logger to use COM1 to control your K3. That way the frequencies will be tracked in the N1MM Logger contest log. If you are using AFSK, you should also let N1MM Logger control TX/RX switching (PTT). That is, you should set MMTTY's FSK/PTT port to NONE and configure a PTT method within the N1MM Logger Configurer. See the N1MM Logger documentation for details. If you want to use FSK from MMTTY, you must use separate COM ports for radio control and FSK keying. The only way MMTTY can key FSK is using a separate port connected to the K3's ACC connector through a keying circuit. 73, Rich VE3KI KM5PS wrote: I have my k3 running well with N1MM and MMTTY thru com1, but frequency will not track because mmtty uses com 1 for control of rig. What is the best way to have the K3 track the frequency and mmtty control of the k3? Is it to use the 15 pin plug on the back of the rig? Not really a big deal unless you are in SP mode and click on a multiplier from list and rig does not go to the frequency, just would be nice though. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] k3 and RTTY hookup question
http://www.w3yy.com/k3.pdf 73 Uwe DK4WW -Ursprüngliche Nachricht- From: Richard Ferch Sent: Sunday, November 11, 2012 12:23 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] k3 and RTTY hookup question You should let N1MM Logger do rig control. Assuming you have a serial cable between COM1 and your K3's RS232 jack, set the Radio command port in MMTTY to NONE and configure N1MM Logger to use COM1 to control your K3. That way the frequencies will be tracked in the N1MM Logger contest log. If you are using AFSK, you should also let N1MM Logger control TX/RX switching (PTT). That is, you should set MMTTY's FSK/PTT port to NONE and configure a PTT method within the N1MM Logger Configurer. See the N1MM Logger documentation for details. If you want to use FSK from MMTTY, you must use separate COM ports for radio control and FSK keying. The only way MMTTY can key FSK is using a separate port connected to the K3's ACC connector through a keying circuit. 73, Rich VE3KI KM5PS wrote: I have my k3 running well with N1MM and MMTTY thru com1, but frequency will not track because mmtty uses com 1 for control of rig. What is the best way to have the K3 track the frequency and mmtty control of the k3? Is it to use the 15 pin plug on the back of the rig? Not really a big deal unless you are in SP mode and click on a multiplier from list and rig does not go to the frequency, just would be nice though. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] k3 and RTTY hookup question
Thanks for all advice. I looked at my config. settings again checked com 1 for k3. All is working great now. I thought that I had to set tx up in the rtty engin under n1mm for com 1 to transmitt, that is what I get for thinking. Thanks again. John __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] k3 and RTTY hookup question
I have my k3 running well with N1MM and MMTTY thru com1, but frequency will not track because mmtty uses com 1 for control of rig. What is the best way to have the K3 track the frequency and mmtty control of the k3? Is it to use the 15 pin plug on the back of the rig? Not really a big deal unless you are in SP mode and click on a multiplier from list and rig does not go to the frequency, just would be nice though. TIA John __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
