Hi Lyle ! i obseved, that the combination HLD (30ms) and PLS (on) not working well I have dedected pulses every second at my qth - so hold let the agc hold for 30ms and agc goes down... downsizing HLD to zero it works well, so maybe you can also include that any hold will be disabled when PLS is decaying back
73 oe6kyg > > You can tap DISP when any of these are displayed and a short help > message will scroll across the VFO B display. > > > AGC HLD (Hold?) > > In slow AGC, this is the time that the AGC will hold its most recent > peak value before starting to decay. > > > AGC PLS (Pulse?) > > This defines the width of a signal that is considered a pulse (like > ignition noise) instead of data (like a CW dit). If a pulse is > detected, the AGC rapidly decays back to its previous value after the > pulse ends. Otherwise, the AGC assumes it was a signal and responds > accordingly. > > > AGC SLP (Slope?) > > This allows you to change the "flatness" of the AGC. Some people like > ift flat (very strong signals and moderately weak signals all have the > same loudness). Others prefer that stronger signals drive the audio > level alittle harder than weaker signals. > > > AGC THR (Threshold?} > > Determines the level below which signals do not drive the AGC. > > > AGC-F (Fast) > > Sets the decay rate of the AGC in Fast mode. > > > AGC-S (Slow) > > Sets the decay rate of the AGC (after the Hold time) in Slow mode. > > > Please use non engineering terms.... > > The best way to understand what these do is to play with them, adjusting > one parameter and operating the radio until you are comfortable with > what that parameter does, then changing another, etc., until you know > what they all do. Then adjust them to optimize the K3 for your personal > preferences. > > 73, > > Lyle KK7P > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
