FW: [Elecraft] K3 f/w updates and Keyspan USB to serial port adapter
My K3 back panel RS-232 connector is female. The USB to serial adapter I have is male. The m-f cable I have works fine. I'm not sure what picture you're looking at. I looked at the data sheet and it wasn't immediately clear to me which gender they were. The K3 15-pin accessory connector is also female. 73 de Dick, K6KR -Original Message- From: John Reiser [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 11, 2007 6:13 PM To: Dick Dievendorff; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 f/w updates and Keyspan USB to serial port adapter Hi Dick, I have a serial m-f straight-through cable that has screws on both DB-9s. However, I see from the picture of the K3 rear panel that the RS232 connector is male. I looked at my Keyspan USA 19HS adapter and found that it is also male. So to make it work I would need a f-f serial cable. I think that I should order a KUSB, which is exactly what I was trying to determine. I appreciate yours and everyone's help with this. John, W2GW - Original Message - From: Dick Dievendorff [EMAIL PROTECTED] To: 'John Reiser' [EMAIL PROTECTED] Sent: Tuesday, December 11, 2007 8:37 PM Subject: RE: [Elecraft] K3 f/w updates and Keyspan USB to serial port adapter I suspect you'll be quite happy with your Keyspan, as long as you have a serial m-f cable that you can use to fasten the connectors together. You may have difficulty inserting the Keyspan DB-9 directly into the back of the K3 as both connectors have nuts. You can decide later, of course, and order a KUSB if you feel you need it at the same time you order your next K3 option... 73 de Dick, K6KR ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: FW: [Elecraft] K3 f/w updates and Keyspan USB to serial port adapter
Mike Fatchett W0MU wrote: Or buy an adapter at radio shack...Gender changers. Better still, make yourself a universal gender-changer/extension-cable. Buy two male DB9 connectors for ribbon cable, and two female, then squeeze them onto a foot of 9-way ribbon cable like this: M==F==M==F Take great care about the polarity and orientation of the connectors - they must follow pin 1 to pin1 all the way. It's a very handy thing to have around the shack. -- 73 from Ian GM3SEK 'In Practice' columnist for RadCom (RSGB) http://www.ifwtech.co.uk/g3sek ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
FW: [Elecraft] K3 f/w updates and Keyspan USB to serial port adapter
-- Forwarded Message From: Mike Fatchett W0MU [EMAIL PROTECTED] Date: Tue, 11 Dec 2007 19:27:22 -0700 To: John Reiser [EMAIL PROTECTED] Conversation: [Elecraft] K3 f/w updates and Keyspan USB to serial port adapter Subject: Re: [Elecraft] K3 f/w updates and Keyspan USB to serial port adapter Or buy an adapter at radio shack...Gender changers. On 12/11/07 7:13 PM, John Reiser [EMAIL PROTECTED] wrote: Hi Dick, I have a serial m-f straight-through cable that has screws on both DB-9s. However, I see from the picture of the K3 rear panel that the RS232 connector is male. I looked at my Keyspan USA 19HS adapter and found that it is also male. So to make it work I would need a f-f serial cable. I think that I should order a KUSB, which is exactly what I was trying to determine. I appreciate yours and everyone's help with this. John, W2GW - Original Message - From: Dick Dievendorff [EMAIL PROTECTED] To: 'John Reiser' [EMAIL PROTECTED] Sent: Tuesday, December 11, 2007 8:37 PM Subject: RE: [Elecraft] K3 f/w updates and Keyspan USB to serial port adapter I suspect you'll be quite happy with your Keyspan, as long as you have a serial m-f cable that you can use to fasten the connectors together. You may have difficulty inserting the Keyspan DB-9 directly into the back of the K3 as both connectors have nuts. You can decide later, of course, and order a KUSB if you feel you need it at the same time you order your next K3 option... 73 de Dick, K6KR ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- End of Forwarded Message ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com