Jason wrote: For Q1 collector, Q2 collector, U6 pin 13, U6 pin 14, U8 pin 15 and U8 pin 16, I get a reading of "0L" on my BK Tool Kit model 2704B DMM. This is the value that's normally displayed when you turn the knob to measure resistance and have an open circuit (i.e. the test leads aren't connected to anything). Does this mean I have an open circuit somewhere, or is the 0L mean infinite resistance (which would be OK on the checks)?
Jason, same difference, infinite resistance is open circuit. I have forgotten exactly what my resistance checks measured at this point, but I would say, keep on truckin'. The main thing you are looking for is something that would measure very low, and consequently you might let the smoke out of some part. Don't be concerned about your DMM not flashing. All DMMs behave somewhat differently from one another. The slow change you observed on P2 pin 1 is probably the 22ufd cap charging up. Again nothing to be concerned about. I would say you are doing great. 73 Jim, W4ATK K2/100 #4028 _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com