Re: [Elecraft] Detaching the K2 Faceplate
> I was wondering if anyone has ever detached the faceplate of a K2? I've been wanting to try this, and I think a 40 conductor IDE disk drive cable would be a good starting point -- they should be readily available, and connectors at each end that should be compatible with the "face" and "chassis" sides of the K2 with only slight modification. You'd need a male-male header at one end since the cables have two female ends. Since the K2 uses only 20 pins between the chassis and face, you could use every other conductor on the cable as a ground for shielding. The IDE cable has two rows of 20 pins -- one row would connect to the existing K2 signals between face/chassis, while the other row of 20 could be connected to ground, and if I remember the cable layout correctly, one of these would conveniently fall adjacent to each signal pin on the cable. Might be best to get a good length of cable (rather than 1-2 feet from a standard IDE cable) and the correct gender headers from digikey/etc. after experimenting with a standard IDE cable. --Andrew, NV1B ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Detaching the K2 Faceplate
James Kern wrote: Check in the Elecraft photo archives on Elecraft's website. Someone detached the front faceplate (as well as some other things) to make the K2 bicycle mobile. Perhaps you can get in contact with that person and get some tips. Good luck! also see http://www.qsl.net/n8mx/bike.html -- -/___. _)Margaret Stephanie Leber CCP, SCJP/"The art of progress / /(, /| /| http://voicenet.com/~maggie SCWCD/ is to preserve order/ ---/ / | / | _ _ _` _ AOPA 925383/ amid change and to / --/ ) / |/ |_(_(_(_/_(_/__(__(/_ K3XS / preserve change amid/ -/ (_/ '.-/ .-/ARRL 39280 /order."-A.N.Whitehead/ /(_/_(_/___AMSAT 32844_/<[EMAIL PROTECTED]>/ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Detaching the K2 Faceplate
Paul, Check in the Elecraft photo archives on Elecraft's website. Someone detached the front faceplate (as well as some other things) to make the K2 bicycle mobile. Perhaps you can get in contact with that person and get some tips. Good luck! James Kern KB2FCV -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul T. Rubin Sent: Monday, September 12, 2005 4:01 PM To: 'Elecraft Reflector' Subject: [Elecraft] Detaching the K2 Faceplate Hello all: I was wondering if anyone has ever detached the faceplate of a K2? I'm considering using this rig for pedestrian mobile, and I think it would be really neat to have the ability to have the rig in a backpack, and the controls in a fanny pack, as in the ICOM 706. Any ideas? Thanks, Paul Rubin N8NOV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Detaching the K2 Faceplate
Paul: Way back, in the early days of the K2, there was a young chap who detached the front of the K2 from the body in order to mount it on a bicycle. He did a nice job. I believe there were a number of pictures of his arrangement on the Elecraft site. best wishes, dave belsley, w1euy On Sep 12, 2005, at 4:01 PM, Paul T. Rubin wrote: Hello all: I was wondering if anyone has ever detached the faceplate of a K2? I'm considering using this rig for pedestrian mobile, and I think it would be really neat to have the ability to have the rig in a backpack, and the controls in a fanny pack, as in the ICOM 706. Any ideas? Thanks, Paul Rubin N8NOV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
