Steve, That is a normal result of an inadequate BFO range - go back to page 62 in the manual and recheck the range.
BTW, my manual shows that the LSB BFO is to be set at 4913.7 rather than your stated 4912.7. Keep in mind that this is only an initial setting, you will want to chage it after you install the KSB2 and even after that, the optimum setting is best observed by using Spectrogram or a similar audio spectrum analyzer display. 73, Don W3FPR > -----Original Message----- > > When setting the LSB BFO setting the called for frequency in the > manual is > 4912.7. The lowest I can set mine is 4912.86. All of the other > settings on > both CW and SSB can be set to the called for frequency. Do I have > a problem? > 73, > Steve K8IDN > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com