RE: [Elecraft] K2 opinions sought

[Robert Tellefsen]

Hello Mike
Interesting idea for your big panel controls.
My suggestions are separate selection and indicators for FIL1 through FIL4
and AF1 through AF4, R2 ON/OFF with indicator, a RIT control with zero
center
detent, TEST/CW/USB/LSB on separate buttons, ANT1/ANT2 a separate button
from the TUNE function, SPLIT with an ON/OFF indicator.

Some of these, where there are only two states, such as R2 ON/OFF or
ANT1/ANT2,
could be a single button with two indicators side by side.

I hope you get lots of ideas from the group.  Good luck.
73, Bob N6WG
The Little Station with Attitude

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED]
Sent: Monday, October 10, 2005 11:32 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K2 opinions sought


Hi,

I'm in the process of designing an interface for my K2 that would bring
functions, currently enabled or changed by tapping keys or holding keys, to
independent controls.  I am also going to bring some functions, that are
enabled by navigating through the menu system, to single button/switch
functions.  I am doing all of this to bring a big radio feel to my small and
capable K2.

I would like to find out which functions you would like to see implemented
with a single control.  As an example, instead of tapping the mode button to
select USB, LSB, or CW, I will just turn the rotary switch to the desired
mode.

Thanks for your input.

Mike, WA1SEO
 K2-4778
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

RE: [Elecraft] K2 opinions sought

[W3FPR - Don Wilhelm]

Mike,

Unless you are dead set on doing that in a hardware interface, try Ham Radio
Deluxe or the N4PY software - what you want to achieve is already programmed
into them (or can be customized for that function).

If you wish to create a hardware interface, I might suggest that the easiest
path is to have the new hardware buttons buttons interface with a
microprocessor that in turn sends the appropriate commands ot the K2 through
the KIO2.

To do a direct hardware implementation without the processor, one would have
to provide a lot of connections and signals to the K2 microprocessor, and
that would take more circuits that it is worth in my opinion.

73,
Don W3FPR

 -Original Message-

 I'm in the process of designing an interface for my K2 that would
 bring functions, currently enabled or changed by tapping keys or
 holding keys, to independent controls.  I am also going to bring
 some functions, that are enabled by navigating through the menu
 system, to single button/switch functions.  I am doing all of
 this to bring a big radio feel to my small and capable K2.

 I would like to find out which functions you would like to see
 implemented with a single control.  As an example, instead of
 tapping the mode button to select USB, LSB, or CW, I will just
 turn the rotary switch to the desired mode.

 Thanks for your input.

 Mike, WA1SEO
  K2-4778

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.13/126 - Release Date: 10/9/2005

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com