RE: [Elecraft] Keeping Paddles In Place

2007-09-20 Thread Darwin, Keith
My solution to keeping paddles in place is even easier.  Don't touch
them.

My paddles don't move a mm, ever.  They sit there, neatly packed away in
their box waiting for the day I return to machine generated CW.

In the interim, I have my 2 straight keys and the bug hooked up to the
rig.

Oh, and I keep the bug in place by using some of that thin rubbery shelf
liner stuff.  Got it from Morse Express when I ordered a key.

73 All!

- Keith N1AS -
- K2 5411.ssb.100 - 

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


RE: [Elecraft] Keeping Paddles In Place

2007-09-20 Thread RJD
Get a K8RA PADDLE P-5.  The base weights 7lbs and is a very good key. 
 
I have a P-4 and it weights 5lbs and goes NOWHERE!
 
http://www.k8ra.com/
 
Dick, NJ9K

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Dave Yarnes
Sent: Thursday, September 20, 2007 11:23
To: elecraft@mailman.qth.net
Subject: [Elecraft] Keeping Paddles In Place

Hi All,

I have found that even the slightest tendency for my paddle to move (or 
wobble) can really affect the accuracy of my sending.  The faster you send, 
the more important it is for the paddle to be firmly anchored.  At home I 
have a couple of Begali paddles, and they just don't move!  But when I 
travel, I take paddles which, although good paddles, are not quite as 
substantial.  Also, as many of you have pointed out, the rubber feet on many 
paddles are not very good.  Besides being hard and often getting "slick" as 
they age, I don't think they give you enough contact surface.

The shelf liner suggestion is a good one.  If you get the right kind, it 
really helps keep your paddle (and lots of other things too) in place.  I 
don't know how many kinds there are, but commonly I see two kinds.  One has 
kind of a fat, bubbly surface and looks rather smooth.  The other seems a 
bit thinner, and the pattern looks more irregular.  This latter type is what 
you want.  I think it's even cheaper.  The type with the fat bubbles just 
doesn't seem to grab as well, while the thinner type grabs a surface much 
better.  I also use this stuff on my dashboard and console in vehicles.  You 
can use it to keep most anything from sliding around.

Dave W7AQK


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com