Re: [Elecraft] squelch/mute on am/ssb
Lewis, go into the Menu, SQ-main. Then turn fully clockwise until '= Sub Pot' shows up. That will do the trick. (Ofcourse this is hidden in the manual in the CONFIG Menu part.) 73 Arie PA3A Op 16-5-2013 12:48, Lewis Hunter schreef: Is there anyway I can mute the receiver up to a certain signal strength. Like squelch on FM but for AM/SSB? Thanks __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] squelch/mute on am/ssb
/and/ press '1' while in the same menu to get 'SQL = ALL' (vs. 'SQL = FM'). Jeff KC9WSJ On 5/16/2013 6:27 AM, Arie Kleingeld PA3A wrote: Lewis, go into the Menu, SQ-main. Then turn fully clockwise until '= Sub Pot' shows up. That will do the trick. (Ofcourse this is hidden in the manual in the CONFIG Menu part.) 73 Arie PA3A Op 16-5-2013 12:48, Lewis Hunter schreef: Is there anyway I can mute the receiver up to a certain signal strength. Like squelch on FM but for AM/SSB? Thanks __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Squelch and sub receiver not working?
BTW, I forgot to add that the squelch only seems to work in FM mode. Is this the case? Also, when using the sub receiver in FM mode, even if I adjust squelch to the maximum, it will not go to full quieting. I'm confused now. 73, James KC2UEE wrote: Dear group, Not sure if I'm doing something wrong here, but I set SQ MAIN=SUB POT. As I understand it, with this setting the main receiver and sub receiver squelch is now controlled by the RF/SQL SUB pot. Squelch works fine when using the main receiver, and I can see the squelch setting on the sub readout on the LCD. However, switching over to the sub receiver, when I try to adjust squelch, all I get is a SQL=NA message, and squelch levels are not adjustable. Is there something I'm not doing right here? How do I adjust squelch on the sub to obtain full quieting? 73, James KC2UEE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- View this message in context: http://n2.nabble.com/Squelch-and-sub-receiver-not-working--tp2368177p2368188.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Squelch and sub receiver not working?
OK, nevermind... turns out that the sub receiver was not in FM mode, hence the reason squelch wasn't being adjusted. I've also read on the reflector that squelch is only applicable to FM modes. I hope that squelch will also be incorporated into other modes as well. 73, James KC2UEE -- View this message in context: http://n2.nabble.com/Squelch-and-sub-receiver-not-working--tp2368177p2368233.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
RE: [Elecraft] Squelch
Thanks, Joe - for looking this up for me. We must have different editions of the K2 manual - info is on page 103 of mine. I swear, however, that I looked there. I must have turned two pages and skipped over it. Anyway, I've learned something new today. Thanks. Have a good one, 73, Tom KJ3D -Original Message- From: Joe Planisky [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 30, 2008 11:14 PM To: KJ3D Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] Squelch Hi Tom, Yes, the K2 has a Squelch feature. It's accessed through the secondary menu (tap MENU, then tap DISPLAY). Squelch (SLCH) is the first item on the secondary menu. See page 100 in the K2 manual. 73, Joe KB8AP On Apr 30, 2008, at 6:54 PM, KJ3D wrote: Hello Group, I recently installed HSE software and ran into an interesting problem. The folks at Callsign Software couldn't provide a solution, so here I am. After the installation, when the K2 was powered up, it would do so with no audio - but otherwise apparently working fine. A touch on the key or PTT switch brought it back to life, but only for 10 seconds). Somehow, the HSE program turned squelch full on on my K2 (ser 4991 with SSB and DSP). I cannot find a reference to squelch anywhere in the Elecraft literature, including how to turn it off. I did get it off, but it required installing HRD and installing all the sliders. One is for squelch and it was full on. Turning it off and exiting the program solved the problem. My question is... What's the story on squelch? Is there one? How does one access it - specifically how do you turn it off if it gets turned on by a third party? TIA, 73, Tom, KJ3D ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Squelch
Hi Tom, Yes, the K2 has a Squelch feature. It's accessed through the secondary menu (tap MENU, then tap DISPLAY). Squelch (SLCH) is the first item on the secondary menu. See page 100 in the K2 manual. 73, Joe KB8AP On Apr 30, 2008, at 6:54 PM, KJ3D wrote: Hello Group, I recently installed HSE software and ran into an interesting problem. The folks at Callsign Software couldn't provide a solution, so here I am. After the installation, when the K2 was powered up, it would do so with no audio - but otherwise apparently working fine. A touch on the key or PTT switch brought it back to life, but only for 10 seconds). Somehow, the HSE program turned squelch full on on my K2 (ser 4991 with SSB and DSP). I cannot find a reference to squelch anywhere in the Elecraft literature, including how to turn it off. I did get it off, but it required installing HRD and installing all the sliders. One is for squelch and it was full on. Turning it off and exiting the program solved the problem. My question is... What's the story on squelch? Is there one? How does one access it - specifically how do you turn it off if it gets turned on by a third party? TIA, 73, Tom, KJ3D ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
