Re: [Elecraft] 6 meter audio problem
I just did a check on mine with your mic & comp settings and it sounds bad. set your mic gain with the comp off5-6 bars on the alc graph. then turn on the comp at a low setting a adjust it upwards...go into the TEST mode and listen to yourself with headphones... it sounds like the mic is set to low and you are trying to componsate it with the comp setting -- View this message in context: http://n2.nabble.com/6-meter-audio-problem-tp2194602p2196070.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] 6 meter audio problem
k3 with a Commander amp 1200 out, 7 el M2 at 55FT right over the shack and no problems my Mic set at 25 & comp 15 with the MH2 mic -- View this message in context: http://n2.nabble.com/6-meter-audio-problem-tp2194602p2196005.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] 6 meter audio problem
Does it do it when the rig is connected to a dummy load? Sounds like good old RF getting into something. If it's clean on a dummy load, then it's probably is RF getting into something. I assume the rig and power supply are properly grounded? What kind of SWR do you have on the antenna? Terry -- Original message -- From: Mike k7MXB <1poppasm...@gmail.com> > > Hi All, > > I have K3 with the 100 watt amp and the ATU. When operating on 6 meters, I > am experiencing a, "growling" sound in the audio in SSB mode plus what > sounds like feed back when the MH2 mic is keyed. The audio on all other > bands, including 10 meters, is fine. I have the mic gain set at 8 and the > compression at 21. Any thoughts? > > Thanks, > > Mike > K7MXB > -- > View this message in context: > http://n2.nabble.com/6-meter-audio-problem-tp2194602p2194602.html > Sent from the Elecraft mailing list archive at Nabble.com. > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] 6 meter audio problem
Mike, Could it be an RF issue in the shack? I notice similar behavior when I turn my moxon toward the shack but it goes away when I point in another direction. The antenna is on a push-up mast just outside the shack. When I use the K3 tuner on a wire antenna well away from the shack I don't see the problem at all. - 73, Greg - AB7R Whidbey Island WA NA-065 On Wed Jan 21 13:05 , Mike k7MXB sent: > >Hi All, > >I have K3 with the 100 watt amp and the ATU. When operating on 6 meters, I >am experiencing a, "growling" sound in the audio in SSB mode plus what >sounds like feed back when the MH2 mic is keyed. The audio on all other >bands, including 10 meters, is fine. I have the mic gain set at 8 and the >compression at 21. Any thoughts? > >Thanks, > >Mike >K7MXB >-- >View this message in context: http://n2.nabble.com/6-meter-audio-problem- tp2194602p2194602.html >Sent from the Elecraft mailing list archive at Nabble.com. > >___ >Elecraft mailing list >Post to: Elecraft@mailman.qth.net >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com