Re: [Elecraft] Elecraft at Dayton
-- From: "David and Dianne on Comcast" <[EMAIL PROTECTED]> An S9+60db signal on the main receiver is not heard at all on the sub receiver at all. Erm - can you give an example? My tired brain doesn't understand. Simple Simon ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft at Dayton
An S9+60db signal on the main receiver is not heard at all on the sub receiver at all. Erm - can you give an example? My tired brain doesn't understand. A really strong signal being received on one receiver does not "bleed through" to the other receiver, even though they share the exact same I.F. Simple Simon Loquacious Lyle ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft at Dayton
OK, I understand (just)! I guess I'll bite the bullet and pay for one on Monday - I would like to monitor two portions of 20m at the same time. Currently using my very capable TS-480SAT on 20m PSK / RTTY, must crank up the K3 :-) I assume that I can use the same antenna for both receivers? Simon Brown, HB9DRV -- From: "Lyle Johnson" <[EMAIL PROTECTED]> A really strong signal being received on one receiver does not "bleed through" to the other receiver, even though they share the exact same I.F. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft at Dayton
I would like to monitor two portions of 20m at the same time... I assume that I can use the same antenna for both receivers? Yes, at least with the KAT3 installed. I've not looked at a K3 +KRX3 configuration without a KAT3. 73, Lyle KK7P ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft at Dayton
> Hear! Hear! I've been slowly assembling some QRO gear to > go with my K2, and I would love to have something that is completely > integrated with the AUXBUS and works as well as the KPA100/KAT100 > combination. I'd be especially keen on a KPA800 that I could drive > with just the barefoot K2; my KPA100 is in an external cabinet. The > QRO gear lives at our vacation QTH; my main rig there is a K1 (not > hooked to the amp) and I take the K2 with me on contest weekends. I > like being able to pack up *just* the K2. You can always drive a linear amp with a QRP signal, but under FCC rules, producing more than 480 watts out with 15W in is prohibited for a type-accepted amplifier (15 db gain). err, why not just build up another KPA-100 and leave it with the KPA800? 73, doug ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft at Dayton
> You can always drive a linear amp with a QRP signal, but under FCC > rules, producing more than 480 watts out with 15W in is prohibited for > a type-accepted amplifier (15 db gain). Of course! Too much blood in my caffeine stream. But if there were, say, a convenient attenuator pad that could be bypassed by a motivated amateur... > err, why not just build up another KPA-100 and leave it with the > KPA800? No reason, really, aside from cost (which might pale in comparison to the KPA800!) Mostly, I guess, I hope that any such amp will be as well integrated with the K2 as the K3. 73 de chris K6DBG -- View this message in context: http://www.nabble.com/K3---New-firmware-tp17307418p17317662.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft at Dayton
Date: Mon, 19 May 2008 08:13:09 -0700 (PDT) From: Chris Kantarjiev K6DBG <[EMAIL PROTECTED]> > You can always drive a linear amp with a QRP signal, but under FCC > rules, producing more than 480 watts out with 15W in is prohibited for > a type-accepted amplifier (15 db gain). Of course! Too much blood in my caffeine stream. But if there were, say, a convenient attenuator pad that could be bypassed by a motivated amateur... IIRC, "easily modified" was in the older rules, but that seems to only apply to CB coverage now. > err, why not just build up another KPA-100 and leave it with the > KPA800? No reason, really, aside from cost (which might pale in comparison to the KPA800!) Yep. I suspect the KPA100 is really necessary, though, since it's got filtering approriate for that level of output power and I think there might be a problem with just amplifying the QRP level signal to real QRO, without adding the extra filtering. I suspect other know the details on this better than I. Mostly, I guess, I hope that any such amp will be as well integrated with the K2 as the K3. Note that the KPA800/1500 was first shown with the K2, and was closely integrated at that time. Rumor: I've heard that the amp worked really well mostly, but there was a problem that caused much failure of the expensive power devices. 73, doug ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft at Dayton
Doug Faunt N6TQS +1-510-655-8604 wrote: Note that the KPA800/1500 was first shown with the K2, and was closely integrated at that time. It would work well with the K2, but it was designed to work with other popular rigs from ICOM, Yaesu, Kenwood, etc. as well. It is not 'closely integrated' in the way that the KPA100 is! Rumor: I've heard that the amp worked really well mostly, but there was a problem that caused much failure of the expensive power devices. I asked Eric specifically why the amplifiers were delayed. Did they meet IMD goals? He said that there was only one reason: the K3. -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft at Dayton
Ooooh...yes please Gary VK4FD Sent via BlackBerry® from Telstra -Original Message- From: "Peter ZL1PWD" Date: Fri, 14 May 2010 20:30:25 To: Subject: [Elecraft] Elecraft at Dayton Can we have regular updates from attendees as to what is new,whats upgraded etc and all the scuttlebut!!! P3 delivery would also be good as would updates on the KPA 500!! Enjoy Dayton vry 73 Peter ZL1PWD K3#139 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Elecraft at Dayton
I think the P3 has a scheduled July 15, 2010 ship date. Darin Sent from my iPad On May 14, 2010, at 1:30 AM, "Peter ZL1PWD" wrote: > Can we have regular updates from attendees as to what is new,whats upgraded > etc and all the scuttlebut!!! > > P3 delivery would also be good as would updates on the KPA 500!! > > Enjoy Dayton > > vry 73 > > Peter ZL1PWD > > K3#139 > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
RE: [Elecraft] Elecraft at Dayton
Julius, It is a good guess that the new QRP amp will be there on display, along with all the other gear. The booth is larger than before so that will be nice. You can come and watch me build my KX1 - I will be there with a live building demo at the booth, I just arranged that with Wayne and Eric yesterday. Yes, you will find a lot of great Elecraft owners and prospective owners to chat with. 73, Don W3FPR > -Original Message- > > I was wondering, will there be anything special > happening at the Elecraft Booth at Dayton? New secret > weapons, closeout specials on the K3, 20Kw amplifiers? > Or will it just be friendly business and kinship with > the best rig owners in Hamdom? > > Cheers, > Julius > n2wn > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft at Dayton
Don, I've been following the progress of the coming new 800watt and 1500 watt amps, but you mention a "QRP amp".did I miss something? Rich k2cpe K2 #1102 -- Don Wilhelm wrote: Julius, It is a good guess that the new QRP amp will be there on display ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Elecraft at Dayton
Sorry folks for the 'fat-finger' on the keyboard - that should have been "QRO" amp. 73, Don W3FPR > -Original Message- > > It is a good guess that the new QRP amp will be there on display, > along with > all the other gear. The booth is larger than before so that will be nice. > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft at Dayton
Don't know about Dayton but at Orlando they were selling items. Either to carry away or have shipped. David K0LUM At 8:51 PM +0800 4/7/11, Johnny Siu wrote: >Hello Group, > >>From your past experience, will there be any kit / product >>selling at Elecraft >booth in Dayton? Or, is the booth only for demonstration of >Elecraft products? > TNX & 73, > >Johnny VR2XMC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Elecraft at Dayton
They have done both at Dayton every year I have been there. Do not know how many of the big kits they have there. But I have bought some of the small items and ordered big ones from their booth. And gotten to see all the radios. 73, tom n4zpt On 4/7/2011 8:51 AM, Johnny Siu wrote: > Hello Group, > >> From your past experience, will there be any kit / product selling at >> Elecraft > booth in Dayton? Or, is the booth only for demonstration of Elecraft > products? > TNX& 73, > > > Johnny VR2XMC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
