Re: [Elecraft] K2/100 Amp Keying Limits?
My OLD Rev A 2002 K2/100 manual shows it on page 56. It'll switch 1A, +200VDC via an IRF830 (or IRL620) MOSFET to ground. It's on the left middle of the second page of the schematic. Lou W7HV On Tuesday, March 16, 2021, 9:23:15 PM MDT, Mike Cizek W0VTT wrote: Hello Eric, It's in theKPA100 manual, at the back under Specifications: DC relay coil pulled to ground 1A at 200 VDC (do not use with AC-controlled relay) P59 in my book, which I just noticed, comes right after p62. 73, Mike Cizek W0VTT -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of eric norris via Elecraft Sent: Tuesday, 16 March, 2021 21:11 To: Elecraft Reflector Subject: [Elecraft] K2/100 Amp Keying Limits? Can anyone tell me what the external amplifier keying limits are for a K2/100? I'm trying to use an AL811H, which has 14.5V at 10ma on the relay jack. Do I need an external interface? I cannot find the answer in the K2/100 manual. Thanks! 73, Eric WD6DBM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2/100 Amp Keying Limits?
Sent you an email Eric. John. ve7day On 16/03/2021 7:10 p.m., eric norris via Elecraft wrote: Can anyone tell me what the external amplifier keying limits are for a K2/100? I'm trying to use an AL811H, which has 14.5V at 10ma on the relay jack. Do I need an external interface? I cannot find the answer in the K2/100 manual. Thanks! 73, Eric WD6DBM  __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ve7...@telus.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2/100 Amp Keying Limits?
Hello Eric, It's in theKPA100 manual, at the back under Specifications: DC relay coil pulled to ground 1A at 200 VDC (do not use with AC-controlled relay) P59 in my book, which I just noticed, comes right after p62. 73, Mike Cizek W0VTT -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of eric norris via Elecraft Sent: Tuesday, 16 March, 2021 21:11 To: Elecraft Reflector Subject: [Elecraft] K2/100 Amp Keying Limits? Can anyone tell me what the external amplifier keying limits are for a K2/100? I'm trying to use an AL811H, which has 14.5V at 10ma on the relay jack. Do I need an external interface? I cannot find the answer in the K2/100 manual. Thanks! 73, Eric WD6DBM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to mgci...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com