Re: [Elecraft] K2 vs IC-7000 for satellite use.

2005-11-28 Thread Simon Brown (HB9DRV)
Being very pedantic, it does have two VFOs (A and B) but does not have two 
receivers.


But for me the show stopper with the K2 for satellite use is the inability 
to change the transmit frequency via computer control while transmitting. In 
the short term the IC-7000 is more what I want as I have the K1  / KX-1 / 
IC-703 anyway.


I am sure  K2 will make its way here early next year though.

Simon Brown
---
www.hb9drv.ch www.laax.ch

- Original Message - 
From: <[EMAIL PROTECTED]>




I can confirm that the new Icom IC-7000 does not have dual VFO's.


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft


Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


Re: [Elecraft] K2 vs IC-7000 for satellite use.

2005-11-28 Thread richark
I can confirm that the new Icom IC-7000 does not have dual VFO's.

73,
Kenny, KU7M

> Simon-
>
> I don't believe that either the K2 or the Icom IC-7000 are suitable for
> satellite use. For optimum performance and minumum frustration, you really
> need full-duplex, cross band capability. You must be able to transmit on
> one
> band, while simultaneously receiving on another band. I don't think the
> IC-7000 supports this mode. Be sure before you decide.
>
> (I use an ICOM IC-970 for this. Could be portable, if I put wheels on
> it...)
>
> GL de Bruce N1RX
>
> Date: Mon, 28 Nov 2005 09:33:39 +0100
> From: "Simon Brown (HB9DRV)" <[EMAIL PROTECTED]>
> Subject: Re: [Elecraft] Re: K2 Twins software?Linux?
> To: 
> Message-ID: <[EMAIL PROTECTED]>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
>   reply-type=original
>
> [Bit of a ramble]
>
> I am currently wondering exactly what to do on the K2 front - I may buy
> the
> IC-7000 because it has 2m and 70cms and can be taken out portable (with a
> decent battery), also some of my portable locations have 220 volts
> available
>
> and there are some very small switch-mode power supplies available. The
> IC-7000 would solve quite a few problems in one easy-to-shift package -
> want
>
> to get out on 2m, 70cms as well as HF.
>
> Not being able to adjust the K2 TX frequency via CAT control makes the K2
> +
> transverter option unrealistic for satellite use, this would have been my
> main use for the K2. The IC-7000 can be adjusted while in transmit.
>
> The IC-7000 downside is RX current drain (1.2A), but solar cells can
> compensate for this. Cost-wise it's much cheaper than the K2 + options +
> transverters, but obviously the K2 is a different beast. And I have the
> KX-1
>
> / K1 / T1 combination anyway.
>
> On the satellite side I am really waiting for the P3E satellite and may
> stick to the 1.3 / 2.4 (and higher) GHz side of things anyway as I'm sure
> the 2m / 70cms transponder will be pretty full.
>
> What I think will happen is that I'll become familiar with the K1 first,
> then try a side-by-side comparison with the K2 while out portable. I see
> the
>
> K2 purchase being put back a year or maybe two - we'll just have to see.
>
> Maybe a visit to FDIM in 2006 is needed to help make the decision - if
> finances and US passport requirements permit.
>
> Simon Brown
> ---
> www.hb9drv.ch www.laax.ch
>
>
> ___
> Elecraft mailing list
> Post to: Elecraft@mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com