Re: [Elecraft] K3 Frequency Memory Editor
Thanks its the 1.1.252.0 version and yes I am using it to program the K3. I found a later version (1.3.3.0) which I downloaded and tried and got the same results - I did note 3 "Writememory2state.Ontimerexpiry" messages. Hope this clarifies things. Andy From: Dick Dievendorff To: 'ANDY NEHAN' Sent: Wednesday, 5 June 2013, 14:13 Subject: RE: [Elecraft] K3 Frequency Memory Editor What K3 Frequency Memory Editor version are you using? And you're using it with a K3, not a KX3, right? This is in the Help - About screen. 73 de Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of ANDY NEHAN Sent: Wednesday, June 05, 2013 0:07 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 Frequency Memory Editor Hi, I have noted that when I use the above utility it does what I want apart from the 50MHz band. I set it to the required frequency and mode (50.250 and Data) yet when I upload that info to the K3 the mode becomes Data Rev. This does NOT happen on any other band (and I use the memories to get me to the PSK frequencies for all bands). On the other bands the frequency is correct and the mode is Data. I have tried changing the mode on the K3 to Data then reading that into the K3 Frequency Memory Editor and then re-exporting it back to the K3 - but the result is the same. I guess it must be obvious what I am doing wrong but it sure is puzzling me at the moment!! Andy G4HUE K3 s/n 6990 P3 s/n 2493 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor Software bug
Yes, this is a known issue that I'll try to get to in the near future. Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of G3XDY Sent: Thursday, October 04, 2012 9:48 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 Frequency Memory Editor Software bug Can anyone confirm a problem I seem to be having with the K3 Frequency Memory Editor software? If I try to set memory frequencies for transverters in the XVn memories above 2.3GHz I get an error message, and if I set a memory directly on the K3 and then read it back with the utility it shows up as a frequency that has no obvious relationship to that set on the K3. This seems to be the case for any band above 2.3GHz. A previous version of the utility worked OK on 2.3 and 3.4GHz but failed on 5.7GHz and above, and the error message with that version makes me think its an overflow in a 32 bit integer variable used to represent the frequency. 73 John G3XDY K3 #00689 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
On the KX3 Yahoo group, in the files section, is an example file that you may open with the K3 Frequency Memory Editor and then optionally edit and/or download to the KX3. Of course, if you ahve a K3, you may already have files you wish to use. 73 de JP WF4Z On Mon, May 28, 2012 at 12:05 PM, Dick Dievendorff wrote: > Yes. The most recent revision on the Elecraft web site is needed. > > Dick, K6KR > > > -Original Message- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Lally > Sent: Monday, May 28, 2012 8:51 AM > To: elecraft@mailman.qth.net > Subject: [Elecraft] K3 Frequency Memory Editor > > Can the K3 Frequency Memory Editor be used to edit memories in the KX3? > > > > Thanks, > > > > John Lally > > W7JJL > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Yes. The most recent revision on the Elecraft web site is needed. Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Lally Sent: Monday, May 28, 2012 8:51 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 Frequency Memory Editor Can the K3 Frequency Memory Editor be used to edit memories in the KX3? Thanks, John Lally W7JJL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor - How to save and recall the file??
Save it as an XML file type. It's an XML file. Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave Weiss Sent: Friday, April 27, 2012 4:34 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 Frequency Memory Editor - How to save and recall the file?? Hi Everyone: This should be a no brainer, but it seems that I am unable to save the three entries that I have made into 00,01,02 slots in anything but an .XML file type. I have been successful in getting the K3 to upload to the PC with the 3 locations contents so I know the load went there. The saved .XML file comes up in a browser window( garbage)...I think that I should be able to reopen a modified "Elecraft K3 Frequency Memory Editor" with my entries. The basic problem is saving and reopening the saved file. It just seems to not work the way I think it should. Can anyone shed light on this please? What am I misunderstanding? This could be a powerful tool for me. 73 -- Dave K3FT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Can you give some details about the fault? Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Doug Wetzel Sent: Saturday, November 13, 2010 1:20 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 Frequency Memory Editor Anybody on the list having trouble getting K3 Freq Memory Editor to load properly? I have one XP machine on which it works fine, and one on which it always throws a fault and quits. AFAIK, the two machines are at the same OS/SP level and both have the latest .NET service pack. Doug Wetzel K7IP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Yes.. No timeframe yet. My plate overfloweth at the moment. Weeks. Not months. :) David, W4SMT --- On Wed, 8/11/10, Ramon Tristani wrote: > Will there be a version for the Mac? > > > On Aug 4, 2010, at 8:42 PM, Eric Swartz - WA6HHQ, Elecraft > wrote: > > > The K3 Frequency Memory Editor has now been formally > released. See: > > > > http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm > > > > Thanks to Dick Dievendorff for all his hard work! > > > > 73, > > Eric WA6HHQ > > > > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Will there be a version for the Mac? On Aug 4, 2010, at 8:42 PM, Eric Swartz - WA6HHQ, Elecraft wrote: > The K3 Frequency Memory Editor has now been formally released. See: > > http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm > > Thanks to Dick Dievendorff for all his hard work! > > 73, > Eric WA6HHQ > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor with Win98SE
Dead systemsheck I still use GWBASIC for my "inhouse" programs. Great Grandmaw Susan > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Susan, Did you change the default com port to what you use to communicate with your K3?? Can you guess how I know to try this, hi hi. 73, Don, WB5HAK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Aloha: I have downloaded the freq. memory editorentered my frequencies, etc., but it will not upload to the K3. ? Susan If you don't change direction you WILL arrive exactly where you're headed!! Susan Meckley, Skipper W7KFI-mm AFA9SM USSV DHARMA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
On Wed, 04 Aug 2010 17:42:17 -0700, "Eric Swartz - WA6HHQ, Elecraft" wrote: I know you knew someone would get around to asking this: ;o) In the XML file, what are the codes? Do you have a list of what they mean? Tom N5GE, The always curious retired software developer... >The K3 Frequency Memory Editor has now been formally released. See: > >http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm > >Thanks to Dick Dievendorff for all his hard work! > >73, >Eric WA6HHQ > [snip] __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor with Win98SE
Well, the .Net Framework is supposed to work on Windows 98 SE, so I can at
least give it a try, if the prerequisite software is installed and does the
job.
I'm still using Visual Studio 2005 (and not 2008 or 2010) for the Elecraft
utilities because the newer compilers generate EXEs that don't run on
Windows 98 SE or Windows ME.
I'm aware that at least some of our community migrates
older-but-working-fine systems into the radio shack...
But I can't ignore the development productivity I get from using a modern
runtime library, and I needed a grid control for this effort. The .Net
framework's grid control is adequate and is free for customers.
73 de Dick, K6KR
-Original Message-
From: Joe Subich, W4TV [mailto:li...@subich.com]
Sent: Thursday, August 05, 2010 9:23 AM
To: Elecraft Reflector; die...@comcast.net
Subject: Re: [Elecraft] K3 Frequency Memory Editor with Win98SE
Dick,
> I'll do some poking around to see if I can offer a Windows 98 SE
> version. I hope it is possible.
If you're supporting dead operating systems, how about DOS and
CP/M versions ?
73,
... Joe, W4TV
On 8/5/2010 11:51 AM, Dick Dievendorff wrote:
> The K3 Frequency Memory Editor requires the Windows .Net framework
> (2.0). It can be installed from
>
>
http://www.microsoft.com/downloads/details.aspx?FamilyID=0856eacb-4362-4b0d-
>
>
8edd-aab15c5e04f5&displaylang=en
>
> The setup.exe and K3FreqMemoryEditor.msi files should be in the same
> directory. Setup.exe looks for it there.
>
> It appears that we currently require Windows Installer 3.1 or later.
> I'll see if I can influence that. Windows Installer 3.1 is an Windows
> 2000 and later product, Installer 2.0 is available for Windows 98
> SE.
>
> Can you try installing Windows Installer 2.0 from
>
>
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=cebb
>
>
acd8-c094-4255-b702-de3bb768148f
>
> I'll do some poking around to see if I can offer a Windows 98 SE
> version. I hope it is possible.
>
> Dick, K6KR
>
>
>
>
>
>
>
>
> -Original Message- From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Paul Kirley
> Sent: Thursday, August 05, 2010 8:35 AM To: elecraft@mailman.qth.net
> Subject: [Elecraft] K3 Frequency Memory Editor with Win98SE
>
> Installation of the .zip version of the Freq Mem Editor failed on my
> Win98SE machine. I unzipped in my own temporary directory
> (nonstandard name) and double-clicked setup.exe as instructed.
>
> Is there some special place where the .msi file should be placed? I
> believe that I already have some .msi files here and there from other
> downloads. I do not have "DotNet" installed, as I have never needed
> it.
>
> The log file shows the following, ending in an error message that
> setup.exe displayed when it abended:
>
> The following properties have been set: Property: [AdminUser] = true
> {boolean} Property: [ProcessorArchitecture] = Intel {string}
> Property: [Version9x] = 4.10.0 {version} Running checks for package
> '.NET Framework 2.0', phase BuildList Running external check with
> command line "c:\windows\TEMP\VSD6012.TMP\dotnetfx\dotnetchk.exe"
> Process exited with code 0 Setting value '0 {int}' for property
> 'DotNetInstalled' Reading value 'Version' of registry key
> 'HKLM\Software\Microsoft\Internet Explorer' Read string value
> '6.0.2800.1106' Setting value '6.0.2800.1106 {string}' for property
> 'IEVersion' The following properties have been set for package '.NET
> Framework 2.0': Property: [DotNetInstalled] = 0 {int} Property:
> [IEVersion] = 6.0.2800.1106 {string} Running checks for command
> 'dotnetfx\instmsia.exe' Result of running operator 'ValueExists' on
> property 'VersionNT': false Result of running operator
> 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value
> '2.0': true Result of checks for command 'dotnetfx\instmsia.exe' is
> 'Bypass' Running checks for command
> 'dotnetfx\WindowsInstaller-KB893803-v2-x86.exe' Result of running
> operator 'ValueExists' on property 'Version9x': true Result of checks
> for command 'dotnetfx\WindowsInstaller-KB893803-v2-x86.exe' is
> 'Bypass' Running checks for command 'dotnetfx\dotnetfx.exe' Result of
> running operator 'ValueNotEqualTo' on property 'DotNetInstalled' and
> value '0': false Result of running operator 'ValueEqualTo' on
> property 'AdminUser' and value 'false': false Skipping
Re: [Elecraft] K3 Frequency Memory Editor
now that is interesting idea - using the iPad as a logger and controlling the K/P3 would be very good for /P looks like an adapter is ~ 50 GBP 73 de M0XDF, K3 #174 (P3 #???) On 5 Aug 2010, at 17:13, Kok Chen wrote: > A Bluetooth adapter at the K3 end is an easy solution, but not a cheap > one. The other is to WiFi from the iPad to a computer that is already > attached to the K3 (which is also a cross platform solution). __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor with Win98SE
Dick,
> I'll do some poking around to see if I can offer a Windows 98 SE
> version. I hope it is possible.
If you're supporting dead operating systems, how about DOS and
CP/M versions ?
73,
... Joe, W4TV
On 8/5/2010 11:51 AM, Dick Dievendorff wrote:
> The K3 Frequency Memory Editor requires the Windows .Net framework
> (2.0). It can be installed from
>
> http://www.microsoft.com/downloads/details.aspx?FamilyID=0856eacb-4362-4b0d-
>
>
8edd-aab15c5e04f5&displaylang=en
>
> The setup.exe and K3FreqMemoryEditor.msi files should be in the same
> directory. Setup.exe looks for it there.
>
> It appears that we currently require Windows Installer 3.1 or later.
> I'll see if I can influence that. Windows Installer 3.1 is an Windows
> 2000 and later product, Installer 2.0 is available for Windows 98
> SE.
>
> Can you try installing Windows Installer 2.0 from
>
> http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=cebb
>
>
acd8-c094-4255-b702-de3bb768148f
>
> I'll do some poking around to see if I can offer a Windows 98 SE
> version. I hope it is possible.
>
> Dick, K6KR
>
>
>
>
>
>
>
>
> -Original Message- From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Paul Kirley
> Sent: Thursday, August 05, 2010 8:35 AM To: elecraft@mailman.qth.net
> Subject: [Elecraft] K3 Frequency Memory Editor with Win98SE
>
> Installation of the .zip version of the Freq Mem Editor failed on my
> Win98SE machine. I unzipped in my own temporary directory
> (nonstandard name) and double-clicked setup.exe as instructed.
>
> Is there some special place where the .msi file should be placed? I
> believe that I already have some .msi files here and there from other
> downloads. I do not have "DotNet" installed, as I have never needed
> it.
>
> The log file shows the following, ending in an error message that
> setup.exe displayed when it abended:
>
> The following properties have been set: Property: [AdminUser] = true
> {boolean} Property: [ProcessorArchitecture] = Intel {string}
> Property: [Version9x] = 4.10.0 {version} Running checks for package
> '.NET Framework 2.0', phase BuildList Running external check with
> command line "c:\windows\TEMP\VSD6012.TMP\dotnetfx\dotnetchk.exe"
> Process exited with code 0 Setting value '0 {int}' for property
> 'DotNetInstalled' Reading value 'Version' of registry key
> 'HKLM\Software\Microsoft\Internet Explorer' Read string value
> '6.0.2800.1106' Setting value '6.0.2800.1106 {string}' for property
> 'IEVersion' The following properties have been set for package '.NET
> Framework 2.0': Property: [DotNetInstalled] = 0 {int} Property:
> [IEVersion] = 6.0.2800.1106 {string} Running checks for command
> 'dotnetfx\instmsia.exe' Result of running operator 'ValueExists' on
> property 'VersionNT': false Result of running operator
> 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value
> '2.0': true Result of checks for command 'dotnetfx\instmsia.exe' is
> 'Bypass' Running checks for command
> 'dotnetfx\WindowsInstaller-KB893803-v2-x86.exe' Result of running
> operator 'ValueExists' on property 'Version9x': true Result of checks
> for command 'dotnetfx\WindowsInstaller-KB893803-v2-x86.exe' is
> 'Bypass' Running checks for command 'dotnetfx\dotnetfx.exe' Result of
> running operator 'ValueNotEqualTo' on property 'DotNetInstalled' and
> value '0': false Result of running operator 'ValueEqualTo' on
> property 'AdminUser' and value 'false': false Skipping FailIf because
> Property 'Version9X' was not defined Skipping FailIf because Property
> 'VersionNT' was not defined Result of running operator
> 'ValueNotExists' on property 'IEVersion': false Result of running
> operator 'VersionLessThan' on property 'IEVersion' and value '5.01':
> false Result of running operator 'ValueNotEqualTo' on property
> 'ProcessorArchitecture' and value 'Intel': false Result of checks for
> command 'dotnetfx\dotnetfx.exe' is 'Install' '.NET Framework 2.0'
> RunCheck result: Install Needed Running checks for package 'Windows
> Installer 3.1', phase BuildList The following properties have been
> set for package 'Windows Installer 3.1': Running checks for command
> 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' Result of
> running operator 'VersionGreaterThanOrEqualTo' on property
> 'VersionMsi' and value '3.1': false Result of running operator
> 'ValueExists' on property 'Version9x': true Result of checks for
> command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is
> 'Fail' 'Windows Installer 3.1' RunCheck result: Fail A prerequisite
> failed for Package "Windows Installer 3.1" Package failed with
> message "Installation of Windows Installer 3.1 requires Windows 2000
> Service Pack 3 or later. Contact your application vendor."
>
> 73, Paul W8TM
>
> __
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net
Re: [Elecraft] K3 Frequency Memory Editor
On Aug 5, 2010, at 8/58:16 AM, David Ferrington, M0XDF wrote: > I might be asking for an iPad version soon (or has Wayne beaten me > to that? :-) You might find that it is a challenging exercise to connect the iPad to the RS-232 port of the K3. There is a USB jack in the iPad "Camera Connection Kit," but since serial ports are not USB Class compliant devices, you will need to be able to install drivers (kernel extensions). For now, the iPad would need to be jailbroken for you to install third party drivers (assuming you can even find drivers for your USB serial adapter for the iPad/ARM architecture to begin with). A Bluetooth adapter at the K3 end is an easy solution, but not a cheap one. The other is to WiFi from the iPad to a computer that is already attached to the K3 (which is also a cross platform solution). Other than those niggling details, multi-touch interfaces for a radio is definitely better than mouse driven interfaces. 73 Chen, W7AY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
> Will the camera connector provide a > 'real' USB which a KUSB could plug into? I doubt it. The driver would be the problem there. No iPad USB/Serial drivers that I know of. :) David, W4SMT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Will the camera connector provide a 'real' USB which a KUSB could plug into? I have an iPad and the Camera connector -7 On 5 Aug 2010, at 16:41, David Fleming wrote: > Yes, it's very much in the works. Third in line behind the P3 Utility and > updates to the K3 Utility. No promises on a release date. > > No plans for an iPad version.. yet. If I could find a serial adapter for the > iPad, it would definitely be on the list. :) > > David, W4SMT > > Sent from my iPad > >> Thank you very much - so good and a >> credit to Elecraft that your producing your s/w for multiple >> platforms >> >> I might be asking for an iPad version soon (or has Wayne >> beaten me to that? :-) >> 73 de M0XDF, K3 #174 >> >> On 5 Aug 2010, at 16:07, Dick Dievendorff wrote: >> >>> It's in the works. >>> >>> 73 de Dick, K6KR >>> >>> >>> -Original Message- >>> From: elecraft-boun...@mailman.qth.net >>> [mailto:elecraft-boun...@mailman.qth.net] >> On Behalf Of David Ferrington, >>> M0XDF >>> Sent: Thursday, August 05, 2010 1:55 AM >>> To: Eric Swartz - WA6HHQ, Elecraft >>> Cc: Elecraft Reflector >>> Subject: Re: [Elecraft] K3 Frequency Memory Editor >>> >>> Any chance of a OSX native version? >>> 73 de M0XDF >>> On 5 Aug 2010, at 01:42, Eric Swartz - WA6HHQ, >> Elecraft wrote: >>> >>>> The K3 Frequency Memory Editor has now been >> formally released. See: >>>> >>>> http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm >>>> >>>> Thanks to Dick Dievendorff for all his hard work! >>>> >>>> 73, >>>> Eric WA6HHQ >>> >>> >> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> >>> >> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor with Win98SE
The K3 Frequency Memory Editor requires the Windows .Net framework (2.0).
It can be installed from
http://www.microsoft.com/downloads/details.aspx?FamilyID=0856eacb-4362-4b0d-
8edd-aab15c5e04f5&displaylang=en
The setup.exe and K3FreqMemoryEditor.msi files should be in the same
directory. Setup.exe looks for it there.
It appears that we currently require Windows Installer 3.1 or later. I'll
see if I can influence that. Windows Installer 3.1 is an Windows 2000 and
later product, Installer 2.0 is available for Windows 98 SE.
Can you try installing Windows Installer 2.0 from
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=cebb
acd8-c094-4255-b702-de3bb768148f
I'll do some poking around to see if I can offer a Windows 98 SE version. I
hope it is possible.
Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Paul Kirley
Sent: Thursday, August 05, 2010 8:35 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 Frequency Memory Editor with Win98SE
Installation of the .zip version of the Freq Mem Editor failed on my Win98SE
machine. I unzipped in my own temporary directory (nonstandard name) and
double-clicked setup.exe as instructed.
Is there some special place where the .msi file should be placed? I believe
that I already have some .msi files here and there from other downloads.
I do not have "DotNet" installed, as I have never needed it.
The log file shows the following, ending in an error message that setup.exe
displayed when it abended:
The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [ProcessorArchitecture] = Intel {string}
Property: [Version9x] = 4.10.0 {version}
Running checks for package '.NET Framework 2.0', phase BuildList
Running external check with command line
"c:\windows\TEMP\VSD6012.TMP\dotnetfx\dotnetchk.exe"
Process exited with code 0
Setting value '0 {int}' for property 'DotNetInstalled'
Reading value 'Version' of registry key 'HKLM\Software\Microsoft\Internet
Explorer'
Read string value '6.0.2800.1106'
Setting value '6.0.2800.1106 {string}' for property 'IEVersion'
The following properties have been set for package '.NET Framework 2.0':
Property: [DotNetInstalled] = 0 {int}
Property: [IEVersion] = 6.0.2800.1106 {string}
Running checks for command 'dotnetfx\instmsia.exe'
Result of running operator 'ValueExists' on property 'VersionNT': false
Result of running operator 'VersionGreaterThanOrEqualTo' on property
'VersionMsi' and value '2.0': true
Result of checks for command 'dotnetfx\instmsia.exe' is 'Bypass'
Running checks for command 'dotnetfx\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'ValueExists' on property 'Version9x': true
Result of checks for command 'dotnetfx\WindowsInstaller-KB893803-v2-x86.exe'
is 'Bypass'
Running checks for command 'dotnetfx\dotnetfx.exe'
Result of running operator 'ValueNotEqualTo' on property 'DotNetInstalled'
and value '0': false
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value
'false': false
Skipping FailIf because Property 'Version9X' was not defined
Skipping FailIf because Property 'VersionNT' was not defined
Result of running operator 'ValueNotExists' on property 'IEVersion': false
Result of running operator 'VersionLessThan' on property 'IEVersion' and
value '5.01': false
Result of running operator 'ValueNotEqualTo' on property
'ProcessorArchitecture' and value 'Intel': false
Result of checks for command 'dotnetfx\dotnetfx.exe' is 'Install'
'.NET Framework 2.0' RunCheck result: Install Needed
Running checks for package 'Windows Installer 3.1', phase BuildList
The following properties have been set for package 'Windows Installer 3.1':
Running checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property
'VersionMsi' and value '3.1': false
Result of running operator 'ValueExists' on property 'Version9x': true
Result of checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is 'Fail'
'Windows Installer 3.1' RunCheck result: Fail
A prerequisite failed for Package "Windows Installer 3.1"
Package failed with message "Installation of Windows Installer 3.1 requires
Windows 2000 Service Pack 3 or later. Contact your application vendor."
73, Paul W8TM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support t
Re: [Elecraft] K3 Frequency Memory Editor with Win98SE
Basically the errors messages are saying that it won't install on
Windows 98SE.
Doug -- K0DXV
On 8/5/2010 9:35 AM, Paul Kirley wrote:
> Installation of the .zip version of the Freq Mem Editor failed on my Win98SE
> machine. I unzipped in my own temporary directory (nonstandard name) and
> double-clicked setup.exe as instructed.
>
> Is there some special place where the .msi file should be placed? I believe
> that I already have some .msi files here and there from other downloads.
> I do not have "DotNet" installed, as I have never needed it.
>
> The log file shows the following, ending in an error message that setup.exe
> displayed when it abended:
>
> The following properties have been set:
> Property: [AdminUser] = true {boolean}
> Property: [ProcessorArchitecture] = Intel {string}
> Property: [Version9x] = 4.10.0 {version}
> Running checks for package '.NET Framework 2.0', phase BuildList
> Running external check with command line
> "c:\windows\TEMP\VSD6012.TMP\dotnetfx\dotnetchk.exe"
> Process exited with code 0
> Setting value '0 {int}' for property 'DotNetInstalled'
> Reading value 'Version' of registry key 'HKLM\Software\Microsoft\Internet
> Explorer'
> Read string value '6.0.2800.1106'
> Setting value '6.0.2800.1106 {string}' for property 'IEVersion'
> The following properties have been set for package '.NET Framework 2.0':
> Property: [DotNetInstalled] = 0 {int}
> Property: [IEVersion] = 6.0.2800.1106 {string}
> Running checks for command 'dotnetfx\instmsia.exe'
> Result of running operator 'ValueExists' on property 'VersionNT': false
> Result of running operator 'VersionGreaterThanOrEqualTo' on property
> 'VersionMsi' and value '2.0': true
> Result of checks for command 'dotnetfx\instmsia.exe' is 'Bypass'
> Running checks for command 'dotnetfx\WindowsInstaller-KB893803-v2-x86.exe'
> Result of running operator 'ValueExists' on property 'Version9x': true
> Result of checks for command 'dotnetfx\WindowsInstaller-KB893803-v2-x86.exe'
> is 'Bypass'
> Running checks for command 'dotnetfx\dotnetfx.exe'
> Result of running operator 'ValueNotEqualTo' on property 'DotNetInstalled'
> and value '0': false
> Result of running operator 'ValueEqualTo' on property 'AdminUser' and value
> 'false': false
> Skipping FailIf because Property 'Version9X' was not defined
> Skipping FailIf because Property 'VersionNT' was not defined
> Result of running operator 'ValueNotExists' on property 'IEVersion': false
> Result of running operator 'VersionLessThan' on property 'IEVersion' and
> value '5.01': false
> Result of running operator 'ValueNotEqualTo' on property
> 'ProcessorArchitecture' and value 'Intel': false
> Result of checks for command 'dotnetfx\dotnetfx.exe' is 'Install'
> '.NET Framework 2.0' RunCheck result: Install Needed
> Running checks for package 'Windows Installer 3.1', phase BuildList
> The following properties have been set for package 'Windows Installer 3.1':
> Running checks for command
> 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
> Result of running operator 'VersionGreaterThanOrEqualTo' on property
> 'VersionMsi' and value '3.1': false
> Result of running operator 'ValueExists' on property 'Version9x': true
> Result of checks for command
> 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is 'Fail'
> 'Windows Installer 3.1' RunCheck result: Fail
> A prerequisite failed for Package "Windows Installer 3.1"
> Package failed with message "Installation of Windows Installer 3.1 requires
> Windows 2000 Service Pack 3 or later. Contact your application vendor."
>
> 73, Paul W8TM
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Yes, it's very much in the works. Third in line behind the P3 Utility and updates to the K3 Utility. No promises on a release date. No plans for an iPad version.. yet. If I could find a serial adapter for the iPad, it would definitely be on the list. :) David, W4SMT Sent from my iPad > Thank you very much - so good and a > credit to Elecraft that your producing your s/w for multiple > platforms > > I might be asking for an iPad version soon (or has Wayne > beaten me to that? :-) > 73 de M0XDF, K3 #174 > > On 5 Aug 2010, at 16:07, Dick Dievendorff wrote: > > > It's in the works. > > > > 73 de Dick, K6KR > > > > > > -Original Message- > > From: elecraft-boun...@mailman.qth.net > > [mailto:elecraft-boun...@mailman.qth.net] > On Behalf Of David Ferrington, > > M0XDF > > Sent: Thursday, August 05, 2010 1:55 AM > > To: Eric Swartz - WA6HHQ, Elecraft > > Cc: Elecraft Reflector > > Subject: Re: [Elecraft] K3 Frequency Memory Editor > > > > Any chance of a OSX native version? > > 73 de M0XDF > > On 5 Aug 2010, at 01:42, Eric Swartz - WA6HHQ, > Elecraft wrote: > > > >> The K3 Frequency Memory Editor has now been > formally released. See: > >> > >> http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm > >> > >> Thanks to Dick Dievendorff for all his hard work! > >> > >> 73, > >> Eric WA6HHQ > > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Any such requests should come written on the iPad that someone sends to me! Dick -Original Message- From: David Ferrington, M0XDF [mailto:m0...@alphadene.co.uk] Sent: Thursday, August 05, 2010 8:17 AM To: Dick Dievendorff Cc: 'Eric Swartz - WA6HHQ, Elecraft'; 'Elecraft Reflector' Subject: Re: [Elecraft] K3 Frequency Memory Editor Thank you very much - so good and a credit to Elecraft that your producing your s/w for multiple platforms I might be asking for an iPad version soon (or has Wayne beaten me to that? :-) 73 de M0XDF, K3 #174 On 5 Aug 2010, at 16:07, Dick Dievendorff wrote: > It's in the works. > > 73 de Dick, K6KR > > > -Original Message- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David Ferrington, > M0XDF > Sent: Thursday, August 05, 2010 1:55 AM > To: Eric Swartz - WA6HHQ, Elecraft > Cc: Elecraft Reflector > Subject: Re: [Elecraft] K3 Frequency Memory Editor > > Any chance of a OSX native version? > 73 de M0XDF > On 5 Aug 2010, at 01:42, Eric Swartz - WA6HHQ, Elecraft wrote: > >> The K3 Frequency Memory Editor has now been formally released. See: >> >> http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm >> >> Thanks to Dick Dievendorff for all his hard work! >> >> 73, >> Eric WA6HHQ > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Thank you very much - so good and a credit to Elecraft that your producing your s/w for multiple platforms I might be asking for an iPad version soon (or has Wayne beaten me to that? :-) 73 de M0XDF, K3 #174 On 5 Aug 2010, at 16:07, Dick Dievendorff wrote: > It's in the works. > > 73 de Dick, K6KR > > > -Original Message- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David Ferrington, > M0XDF > Sent: Thursday, August 05, 2010 1:55 AM > To: Eric Swartz - WA6HHQ, Elecraft > Cc: Elecraft Reflector > Subject: Re: [Elecraft] K3 Frequency Memory Editor > > Any chance of a OSX native version? > 73 de M0XDF > On 5 Aug 2010, at 01:42, Eric Swartz - WA6HHQ, Elecraft wrote: > >> The K3 Frequency Memory Editor has now been formally released. See: >> >> http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm >> >> Thanks to Dick Dievendorff for all his hard work! >> >> 73, >> Eric WA6HHQ > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
It's in the works. 73 de Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David Ferrington, M0XDF Sent: Thursday, August 05, 2010 1:55 AM To: Eric Swartz - WA6HHQ, Elecraft Cc: Elecraft Reflector Subject: Re: [Elecraft] K3 Frequency Memory Editor Any chance of a OSX native version? 73 de M0XDF On 5 Aug 2010, at 01:42, Eric Swartz - WA6HHQ, Elecraft wrote: > The K3 Frequency Memory Editor has now been formally released. See: > > http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm > > Thanks to Dick Dievendorff for all his hard work! > > 73, > Eric WA6HHQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Dick has done a terrific job. I had lots of irregularities in my settings. When initially setting the memories I obviously took little note of what VFO B was doing. I had strange VFO B frequencies and modes which always messed me up when I went split. Dick's program provides that much needed visual listing. I also had inconsistencies in how I set up the band segment buttons and I was able to clean up my scan ranges which were in a state of chaos. 73, Mike K2MK -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Frequency-Memory-Editor-tp5374927p5376551.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Any chance of a OSX native version? 73 de M0XDF On 5 Aug 2010, at 01:42, Eric Swartz - WA6HHQ, Elecraft wrote: > The K3 Frequency Memory Editor has now been formally released. See: > > http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm > > Thanks to Dick Dievendorff for all his hard work! > > 73, > Eric WA6HHQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Thanks, Dave. I'm hoping people will share their freq memory files. Most of mine are big and have QSO Party frees. 73 de Dick, K6KR Sent from my iPhone On Aug 4, 2010, at 7:01 PM, "Dave Perry N4QS" wrote: > Thanks Dick! The XP version works great here! It provides an easy way to > backup all memories to a file. I can see the potential for all sorts of > applications. How about different memory files for different contests, > operating modes or locations? > > Very nice addition. Now just waiting for my P3 to ship! > > Dave, N4QS > > > - Original Message - > From: "David Fleming" > To: "Elecraft Reflector" > Sent: Wednesday, August 04, 2010 8:36 PM > Subject: Re: [Elecraft] K3 Frequency Memory Editor > > > Awesome app, Dick! Working solid here on my iMac on VMWare Fusion. > > Looks great! Congrats. > > David, W4SMT > > --- On Wed, 8/4/10, Eric Swartz - WA6HHQ, Elecraft > wrote: > >> The K3 Frequency Memory Editor has >> now been formally released. See: >> >> http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm >> >> Thanks to Dick Dievendorff for all his hard work! >> >> 73, >> Eric WA6HHQ > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Thanks Dick! The XP version works great here! It provides an easy way to backup all memories to a file. I can see the potential for all sorts of applications. How about different memory files for different contests, operating modes or locations? Very nice addition. Now just waiting for my P3 to ship! Dave, N4QS - Original Message - From: "David Fleming" To: "Elecraft Reflector" Sent: Wednesday, August 04, 2010 8:36 PM Subject: Re: [Elecraft] K3 Frequency Memory Editor Awesome app, Dick! Working solid here on my iMac on VMWare Fusion. Looks great! Congrats. David, W4SMT --- On Wed, 8/4/10, Eric Swartz - WA6HHQ, Elecraft wrote: > The K3 Frequency Memory Editor has > now been formally released. See: > > http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm > > Thanks to Dick Dievendorff for all his hard work! > > 73, > Eric WA6HHQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Thanks, David. I have some speedups in the next rev so we aren't done! 73 de Dick, K6KR Sent from my iPhone On Aug 4, 2010, at 6:36 PM, David Fleming wrote: > Awesome app, Dick! Working solid here on my iMac on VMWare Fusion. > > Looks great! Congrats. > > David, W4SMT > > --- On Wed, 8/4/10, Eric Swartz - WA6HHQ, Elecraft wrote: > >> The K3 Frequency Memory Editor has >> now been formally released. See: >> >> http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm >> >> Thanks to Dick Dievendorff for all his hard work! >> >> 73, >> Eric WA6HHQ > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Awesome app, Dick! Working solid here on my iMac on VMWare Fusion. Looks great! Congrats. David, W4SMT --- On Wed, 8/4/10, Eric Swartz - WA6HHQ, Elecraft wrote: > The K3 Frequency Memory Editor has > now been formally released. See: > > http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm > > Thanks to Dick Dievendorff for all his hard work! > > 73, > Eric WA6HHQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
This is a very cool tool that has been requested by many K3 owners. Please give it a try. 73, Wayne N6KR On Aug 4, 2010, at 5:42 PM, Eric Swartz - WA6HHQ, Elecraft wrote: > The K3 Frequency Memory Editor has now been formally released. See: > > http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm > > Thanks to Dick Dievendorff for all his hard work! > > 73, > Eric WA6HHQ > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Thanks to all involved! Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Frequency Memory Editor
Its only been released to some of the field testers at the moment. It has been getting put through its paces so that its truly ready for prime time once it drops... ~Brett (N7MG) On Sun, 2010-07-04 at 19:46 +, d_jo...@sympatico.ca wrote: > Has the K3 Frequency Memory Editor been release yet? (Referenced on page 16 > in Rev D7 of the Owner's Manual). I've looked in both of the K3 software > pages and haven't been able to locate it. > > > > Tnx & 73 > > Doug, VE3MV > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
