Hi Yes it is possible but not if you are not actually programming via rs232. You have to issue a SWR command (or Swh I'm working from memory here) Cohen read the vfoa display with a Ds command and then issue the appropriate up and down commands. Same for vfob. If you have no way to read the DS value and do some programming logic you are out of luck. Hope this helps 73s Tom
-------- Original message -------- From: Charles Sanders <no5w.ch...@gmail.com> Date: 27/05/2014 22:29 (GMT-05:00) To: elecraft@mailman.qth.net Subject: [Elecraft] K3 Noise Reduction Adjustment via CAT Is it possible to adjust the K3 noise reduction level via CAT? I could not find reference to it in the Programmer's Manual. Any information on when/where that might be available would be appreciated. 73/Chuck/NO5W ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to tom...@videotron.ca ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com