Re: [Elecraft] K3 and MixW PSK31
It is OK to make a silly mistake. Just not good if it is too often.. If one never makes a mistake then one is never doing anything. Worse is not admitting to a mistake. Enjoy the belly laugh and keep enjoying the wonderful radio. Aloha, John KH7T Gary Gregory wrote: snip in the end downright belly laughs. I have spent the last few hours hiding my face in the corner and remaining very, very quiet. So again, thank you for the support and advice folks, aside from my embarrassment, I am a happy camper yet again. Best wishes for Xmas, Gary ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 and MixW PSK31
He also has a GREAT interface. I am using it now. Craig K6ML Gary Gregory-3 wrote: > > Thanks for the replies and settings etc. All to no avail sadly. The K3 > will > work on CW but stubbornly refuses to TX on DATA A either RTTY or PSK31. > > This was a factory built unit and if I was located near Aptos it would be > on > it's way back to be checked out fully, sadly I live a little ways beyond > California. > > Oh well, who wants to play with a computer when you can find a human to > converse with...so no more data stuff for me, life is way too short to > waste > time playing with 4 data programs that simply don't work with this > particular K3. > > Regards, > Gary > I just got lost in thought. It was unfamiliar territory > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > -- View this message in context: http://n2.nabble.com/K3-and-MixW-PSK31-tp1637540p1641366.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 and MixW PSK31
You Should give Glenn a call at US Interface, as he was the best MixW distributer around. He has helped me get my K3 set up with MixW and his interface as well as the RigExpert interface. Just go to his website and get his number. He is a great guy. Craig K6ML Gary Gregory-3 wrote: > > Thanks for the replies and settings etc. All to no avail sadly. The K3 > will > work on CW but stubbornly refuses to TX on DATA A either RTTY or PSK31. > > This was a factory built unit and if I was located near Aptos it would be > on > it's way back to be checked out fully, sadly I live a little ways beyond > California. > > Oh well, who wants to play with a computer when you can find a human to > converse with...so no more data stuff for me, life is way too short to > waste > time playing with 4 data programs that simply don't work with this > particular K3. > > Regards, > Gary > I just got lost in thought. It was unfamiliar territory > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > -- View this message in context: http://n2.nabble.com/K3-and-MixW-PSK31-tp1637540p1641358.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 and MixW PSK31
Hello Gary, I had problems wetting up at first also. Here are my settings, In mixw I have the cat set to Kenwood...model to elecraft k2.. my com port is set to #1 and baud rate is "38400" same as rig. Have ptt "via cat command" checked afsk in place of fsk checked. In the sound card "device is computer soundcard." Then in input I have "mic" (soundcard name) "output speakers" (soundcard name) I have the sample rate at 1200 becuase I am using winkey...usually its at 11025.. If I remember right. also have "full duplex" checked. On the rig I have data mode "afsk a " "rts-dtr" is set in the menu. and "mic sel" is Line in... Hope this helps.. Don...w2xb Gary Gregory-3 wrote: > > Thanks for the replies and settings etc. All to no avail sadly. The K3 > will > work on CW but stubbornly refuses to TX on DATA A either RTTY or PSK31. > > This was a factory built unit and if I was located near Aptos it would be > on > it's way back to be checked out fully, sadly I live a little ways beyond > California. > > Oh well, who wants to play with a computer when you can find a human to > converse with...so no more data stuff for me, life is way too short to > waste > time playing with 4 data programs that simply don't work with this > particular K3. > > Regards, > Gary > I just got lost in thought. It was unfamiliar territory > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > -- View this message in context: http://n2.nabble.com/K3-and-MixW-PSK31-tp1637540p1639248.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
