John, If the KAT100 is used with the basic K2 (no KPA100), then the KAT100 will provide the forward and reverse power indication and those values will be displayed by the K2 during a TUNE.
When the KPA100 is connected those forward and reflected values come from the KPA100. A similar calculation of SWR is done in the KAT100 to display the SWR on the LEDs. 73, Don W3FPR On 10/31/2012 9:28 PM, zen...@netspace.net.au wrote: > I've just finished building and calibrating a KAT100 to go with my K2 > / KPA100 combination. The build was very smooth and the calibration > routine straight forward. It's tuning my 80m loop, multi-band, just > fine. > > I'd like to check my understanding about the SWR/Power metering with > this K2 + KPA100 + KAT100 set up: > > Is the forward power value displayed on the LCD of the K2 during > TUNE in this setup being measured by the SWR bridge in the KPA100? > My understanding is that the forward power value IS provided by the > KPA100 and NOT the KAT100. > > Is the SWR value displayed on the LCD of the K2 during TUNE > measured at the KPA100 or the KPA100 bridge? > > Thanks for the clarification. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html