Re: [Elecraft] KIO3B Upgrade Kit for the K3
Don, Wasn't the KIO3B code added at firmware level 5.x? If so, not sure the K3 knows anything about the USB setting unless it is polling those settings directly from the board itself. Tom (W2YF) On Tue, Feb 9, 2016 at 7:29 AM, Don Wilhelmwrote: > Rob, > > Did you set the CONFIG: RS232 to USB? You should then be able to get > K3Utility to communicate with the K3 over USB. > Once you accomplish that, you should be able to download the new firmware > through the USB port. > > If that does not work, set the switch on the back of the board to the > RS-232 position and connect the PC (with a USB to serial adapter) to the > dongle provided with the upgrade kit - be sure to set the RS-232 menu > parameter back to 38400 to use RS-232. > > I recall that firmware 4.86 is before the memory slots for the TX Gain > data was moved, so be sure to run TX Gain Calibration after the firmware > upgrade. > > 73, > Don W3FPR > > On 2/8/2016 10:41 PM, ROBERT KIMPEL wrote: > >> I just completed the install of the KI03 update to my K3 SN 4843 and >> guess what? I forgot to update the firmware to the latest version (4.86 >> now). The PC won’t talk to the K3 through the USB! Do I need to restore the >> old boards and then update? I am watching for your HELP! >> Rob, KJ6ILO >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to w3...@embarqmail.com >> > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to tcray...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIO3B Upgrade Kit for the K3
I did not check the firmware release notes. If that is the case, then the switch will have to be set to the RS-232 position and the RJ45 to RS-232 dongle used until the firmware is updated. Be certain the switch is returned to its normal position afterwards. Also be certain the RJ-45 plug is fully inserted. You will hear a definite click when it is fully seated. You may have to slide the boot cover back a bit to push the plug home. 73, Don W3FPR On 2/9/2016 9:16 AM, Tom Crayner wrote: Don, Wasn't the KIO3B code added at firmware level 5.x? If so, not sure the K3 knows anything about the USB setting unless it is polling those settings directly from the board itself. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIO3B Upgrade Kit for the K3
Rob, Did you set the CONFIG: RS232 to USB? You should then be able to get K3Utility to communicate with the K3 over USB. Once you accomplish that, you should be able to download the new firmware through the USB port. If that does not work, set the switch on the back of the board to the RS-232 position and connect the PC (with a USB to serial adapter) to the dongle provided with the upgrade kit - be sure to set the RS-232 menu parameter back to 38400 to use RS-232. I recall that firmware 4.86 is before the memory slots for the TX Gain data was moved, so be sure to run TX Gain Calibration after the firmware upgrade. 73, Don W3FPR On 2/8/2016 10:41 PM, ROBERT KIMPEL wrote: I just completed the install of the KI03 update to my K3 SN 4843 and guess what? I forgot to update the firmware to the latest version (4.86 now). The PC won’t talk to the K3 through the USB! Do I need to restore the old boards and then update? I am watching for your HELP! Rob, KJ6ILO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w3...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIO3B Upgrade Kit for the K3
Thanks for the answer, guys! That helped! ! On Tuesday, February 9, 2016, Don Wilhelmwrote: > Rob, > > Did you set the CONFIG: RS232 to USB? You should then be able to get > K3Utility to communicate with the K3 over USB. > Once you accomplish that, you should be able to download the new firmware > through the USB port. > > If that does not work, set the switch on the back of the board to the > RS-232 position and connect the PC (with a USB to serial adapter) to the > dongle provided with the upgrade kit - be sure to set the RS-232 menu > parameter back to 38400 to use RS-232. > > I recall that firmware 4.86 is before the memory slots for the TX Gain > data was moved, so be sure to run TX Gain Calibration after the firmware > upgrade. > > 73, > Don W3FPR > > On 2/8/2016 10:41 PM, ROBERT KIMPEL wrote: > >> I just completed the install of the KI03 update to my K3 SN 4843 and >> guess what? I forgot to update the firmware to the latest version (4.86 >> now). The PC won’t talk to the K3 through the USB! Do I need to restore the >> old boards and then update? I am watching for your HELP! >> Rob, KJ6ILO >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to w3...@embarqmail.com >> > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KIO3B Upgrade Kit for the K3
Robert, I have not had the experience doing this, but on page 13 of the KIO3B update manual, it instructs how to force a firmware download using the USB port by temporarily moving the internal slide switch to the USB position. ’73 de JIM N2ZZ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of ROBERT KIMPEL Sent: Monday, February 08, 2016 10:41 PM To: elecraft@mailman.qth.net Subject: [Elecraft] KIO3B Upgrade Kit for the K3 I just completed the install of the KI03 update to my K3 SN 4843 and guess what? I forgot to update the firmware to the latest version (4.86 now). The PC won’t talk to the K3 through the USB! Do I need to restore the old boards and then update? I am watching for your HELP! Rob, KJ6ILO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to jboehne...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com