Re: [Elecraft] KPA1500 and K2
Is your K2 one with a PA Key out? If so, just an RCA cable and a coax jumper. Tim On Wed, Jan 11, 2023 at 4:03 PM Karin Johnson wrote: > Hello Group: > > Can I use a Elecraft KPA1500 with a Elecraft K2??? > > What accessory cable will I require > > > > Karin Anne Johnson K3UU > > Palm Harbor, Florida > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to ae...@worldwidedx.com > -- Owner, worldwidedx.com AE6LX, Amateur Radio __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KPA1500 and K2
Beware of VGA cables and the K2, most [maybe all] are not straight-through. The connector on the K2 has 2 pins approximating RS-232 signal levels and 1 ground. The remainder are internal signals at internal voltages. Running solid state amps at seriously reduced drive levels can reduce their linearity and increase unwanted signal products. Don't know about the KPA1500 but might be wise to check. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County Eric Norris wrote on 1/11/2023 11:25 PM: DO NOT CONNECT THE K2 SERIAL OUTPUT TO ANYTHING WITHOUT A CUSTOM CABLE OR AN N6TV SERIAL BOX. I got about 250w out of the KPA1500 with my K2/10, and of course full-tilt disco boogie with my K2/100. 73 Eric WD6DBM On Wed, Jan 11, 2023, 4:03 PM Karin Johnson wrote: Hello Group: Can I use a Elecraft KPA1500 with a Elecraft K2??? What accessory cable will I require Karin Anne Johnson K3UU Palm Harbor, Florida -- This email has been checked for viruses by AVG antivirus software. www.avg.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KPA1500 and K2
You can do it with just an RCA cable if you have the keying mod on a K2/10, or a K2/100. N6TV can make you a Serial box that gives you band info, too, if you have the K2 serial interface, but I could hear the KPA1500 polling the K2--I don't think that was a problem with the Serial Box, but I never solved it. DO NOT CONNECT THE K2 SERIAL OUTPUT TO ANYTHING WITHOUT A CUSTOM CABLE OR AN N6TV SERIAL BOX. I got about 250w out of the KPA1500 with my K2/10, and of course full-tilt disco boogie with my K2/100. 73 Eric WD6DBM On Wed, Jan 11, 2023, 4:03 PM Karin Johnson wrote: > Hello Group: > > Can I use a Elecraft KPA1500 with a Elecraft K2??? > > What accessory cable will I require > > > > Karin Anne Johnson K3UU > > Palm Harbor, Florida > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to norrislawfi...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com