Re: [Emc-developers] Problems with multi axis behaviour in Gmoccapy nad QTDragon
On 2024/02/06 18:20, Marius wrote: Hi If I stop any Gcode program using the cycle stop button while any of the rotational axis (B and C) are not at 0 or home position, then I get a joint following error on joint 0 and joint 2 (X and Z). If the head is situated at the zero or home location then there is no problem. The following test were done: 1) 2.8.4 with Axis giu - no problem 2) 2.8.4 with Gmoccapy - problem 3) 2.9.2 with Axis - no problem 4) 2.9.2 with Gmoccapy - joint following error on 0 and 2 5) 2.9.2 with GTDragon - joint following error on 0 and 2 6) 2.10 with Gmoccapy - joint following error on 0 and 2 It would seem that both the programs do not handle tool length offset correctly especially if a rotation axis is involved. It seems that the tool length setting jumps to zero if the stop button is pressed while the b axis is not on zero. The C axis and A axis has not been tested yet. It would seem that the problem occurs when the gui executes a G49 in the background. This does not happen with Axis but it does with Gmoccapy and QTDragon. G49 should not be used with a multi axis machine at all and there should be an option either on the gui or in the setup to allow the user to make the choice if they want to use it or not. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
Re: [Emc-developers] Error fetching from buildbot
That is very confusing to me now. What is this then http://buildbot.linuxcnc.org/dists/buster/2.9-rtpreempt/binary-amd64/ On 2024/02/05 10:32, Rod Webster wrote: You need to change your sources tohttp://buildbot2.highlab.com/ per the instructions there Linuxcnc never really released a version on other than Bookworm I'm not sure if it will give you exactly what was on the Bookworm release which was a snapshot but it will be close. Rod Webster *1300 896 832* +61 435 765 611 Vehicle Modifications Network www.vehiclemods.net.au On Mon, 5 Feb 2024 at 18:17, Marius wrote: Hi I have a machine on Buster and I tried to update to the latest 2.9.2. These are the errors. Failed to fetchhttp://buildbot.linuxcnc.org/dists/buster/InRelease Temporary failure resolving 'buildbot.linuxcnc.org'Failed to fetch http://linuxcnc.org/dists/buster/InRelease Temporary failure resolving 'linuxcnc.org'Some index files failed to download. They have been ignored, or old ones used instead. This is in my /etc/apt/sources.list debhttp://buildbot.linuxcnc.org buster 2.9-rtpreempt deb-srchttp://linuxcnc.org buster 2.9-rtpreempts regards Marius ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers -- ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
Re: [Emc-developers] Error fetching from buildbot
On 2024/02/05 12:15, andy pugh wrote: On Mon, 5 Feb 2024 at 08:20, Marius wrote: debhttp://buildbot.linuxcnc.org buster 2.9-rtpreempt deb-srchttp://linuxcnc.org buster 2.9-rtpreempts They should both be builbot.linuxcnc.org, and it's "preempt" not "preempts" Hand type typos. They are the same :) -- ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
[Emc-developers] Problems with multi axis behaviour in Gmoccapy nad QTDragon
Hi If I stop any Gcode program using the cycle stop button while any of the rotational axis (B and C) are not at 0 or home position, then I get a joint following error on joint 0 and joint 2 (X and Z). If the head is situated at the zero or home location then there is no problem. The following test were done: 1) 2.8.4 with Axis giu - no problem 2) 2.8.4 with Gmoccapy - problem 3) 2.9.2 with Axis - no problem 4) 2.9.2 with Gmoccapy - joint following error on 0 and 2 5) 2.9.2 with GTDragon - joint following error on 0 and 2 6) 2.10 with Gmoccapy - joint following error on 0 and 2 It would seem that both the programs do not handle tool length offset correctly especially if a rotation axis is involved. It seems that the tool length setting jumps to zero if the stop button is pressed while the b axis is not on zero. The C axis and A axis has not been tested yet. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
