Question to list moderator
Hi, I was wondering if job availabilities can be posted on your email reflectors? If yes, I'll forward you one concerning a contract position in Florida for an EMC/Tempest engineer. Regards, Kurt Fischer This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
About FCC mark
Dear colleagues Is the FCC mark needed on the body of a small electronic control instaled inside a large appliance (like a freezer or washing machine) ? My understanding is that the FCC mark must be given to the appliance, not to the electronic control. Thank you for your help ! Günter J. Maass Researcher - Power Electronic Development EECON This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
C.O. Battery Voltages - EVERYWHERE
I'm interested in obtaining information on the percentage of C.O.'s worldwide that are utilizing -60VDC as their battery voltage. It is my understanding that a majority use -48VDC although some still use -60VDC. Any and all information/references would be helpful. If there are references that are country specific or carrier specific, that would be valuable information as well. Any charts/spreadsheets out there similar to the mains supply charts I've seen would be excellent. Thx, Joe * Joe Finlayson Manager, Compliance Engineering Telica, Inc. 734 Forest Street, Bldg. G, Suite 100 Marlboro, MA 01752 Tel: (508) 804-8212 Fax: (508) 480-0922 Email: jfinlay...@telica.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
RE: Field wiring solutions in the US.
Most of you guys are probably familiar with the field wiring requirements that ITE products must comply with. (mainly for DC powered units) When a unit does not comply and the terminal block is not suitable for field wiring than a manufacture has an option of using 6 leads (not a very favorable option but it is an option) or redesign of the power interface. A solution to this problem can be provided with an external box, which will be sold with the unit. The box clearly must comply with all the requirements of UL60950 (Terminal block suitable for filed wiring, electrical enclosure, access to Hazardous energies, etc.). Does any one know of connection boxes like that that are off the shelf and are UL approved for filed wiring? Any other ideas? Regards Ilan -- Ilan Cohen Technical Director, Safety Telecom Divisions I.T.L (PRODUCT TESTING) Ltd. 26 Hacharoshet St, POB 211, Or Yehuda, Israel. Tel 972-3-5339022, Fax 972-3-5339019 ico...@itl.co.il, website: http://www.itl.co.il This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
EN61326 and deviations
Hi all, I have a question, in EN 61326, Table 2, Evaluation of immunity test results, in the NOTE it states That it is recommended that you use criteria A, but that criteria B may be accepted provided that both specification and the test report highlight such deviation(s) for the relevant combinations(s) of function and test Does this mean I can Pass, for example, a product that meets criteria B for 4-3, Rad Im. at let's say 5.5 V/m just in a few frequencies only. How much highlighting would I have to do in the Test Report and for the product spec, what level of details? Would this include the DoC? Could I say we meet Criteria A, but in a few frequencies we meet criteria B, call for more details. Thank You in advance for all your comments Charlie Martin This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
Re: CCC mark information
Dear Peter, the list is still valid for more information you can also check directly the CQC list: http://www.cqc.com.cn/index-e.htm The CCC Mark is like the European CE Mark mostly valid for end products but not for components. However electrical components such as thermostats must be certified as well if they shall be used in a end-product, which will be CCC certified. In this case there are three possibilities: - voluntary component testing by CQC - CB Report and Certification - testing with the end-product. With regards Cajus Tel.: ++86-20-3761 7948 Fax.: ++86-20-3761 9245 e-mail: c...@qualityworks.org URL: www.qualityworks.org From: Peter Horvat peter...@cae.com To: emc-p...@majordomo.ieee.org Sent: Saturday, April 05, 2003 12:49 AM Subject: CCC mark information Hello all, I'm currently looking at the CCC product catalogue that lists products requiring CCC marking. (available at: http://www.typeapproval.com/cn/Docs/CPCS_Catalogue_of_Equipment.pdf) Does anyone know if the list is complete? If a product does not fall into one of the categories on the list, are there any generic standards/regulations that are applicable, or is the product simply exempted? Thank you in advance for your responses. Peter Horvat CAE Inc. EMC/Safety group --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
Regulations for fire control panels in Hungary
Hello, I have been requested to get the contact information of somebody who would know the regulatory requirements for selling fire control panels in Hungary over the last several years. As we are in the alarm panel business and not the fire business I was stumped but I'm hoping some of you may know or know of someone who does. Please reply to me offline Thanks Best Regards, Kevin Harris Manager, Approvals and CAD Services Digital Security Controls 3301 Langstaff Road Concord, Ontario CANADA L4K 4L2 Tel: +1 905 760 3000 Ext. 2378 Fax +1 905 760 3020 Email: kevinharr...@dsc.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
Re: SAR Testing
Resent as never posted! Andrew: Get in contact with Kathy MacLean of Aprel, they are experts in the field. k.macl...@aprel.com Regards Kevin Keegan KES Associates From: Price, Andrew andrew.p.pr...@baesystems.com To: Majordomo (E-mail) majord...@ieee.org; IEEE EMC-PSTC E-mail Forum (E-mail) emc-p...@majordomo.ieee.org Sent: Thursday, April 03, 2003 5:20 AM Subject: SAR Testing Help needed. Has anyone carried out or know of anywhere that can carryout SAR testing for a bluetooth transmitter with a power 100mW to 500mW. Regards Andy Andrew Price Principal Development Engineer (EMC Specialist) BAE SYSTEMS Avionics A125 Christopher Martin Road Basildon, Essex SS14 3EL tel: +44 (0) 1268 883308 email: andrew.p.pr...@baesystems.com This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
Re: SAR Testing
Resent as never posted! Andrew: Get in contact with Kathy MacLean of Aprel, they are experts in the field. k.macl...@aprel.com Regards Kevin Keegan KES Associates From: Price, Andrew andrew.p.pr...@baesystems.com To: Majordomo (E-mail) majord...@ieee.org; IEEE EMC-PSTC E-mail Forum (E-mail) emc-p...@majordomo.ieee.org Sent: Thursday, April 03, 2003 5:20 AM Subject: SAR Testing Help needed. Has anyone carried out or know of anywhere that can carryout SAR testing for a bluetooth transmitter with a power 100mW to 500mW. Regards Andy Andrew Price Principal Development Engineer (EMC Specialist) BAE SYSTEMS Avionics A125 Christopher Martin Road Basildon, Essex SS14 3EL tel: +44 (0) 1268 883308 email: andrew.p.pr...@baesystems.com This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc From: Price, Andrew andrew.p.pr...@baesystems.com To: Majordomo (E-mail) majord...@ieee.org; IEEE EMC-PSTC E-mail Forum (E-mail) emc-p...@majordomo.ieee.org Sent: Thursday, April 03, 2003 6:20 AM Subject: SAR Testing Help needed. Has anyone carried out or know of anywhere that can carryout SAR testing for a bluetooth transmitter with a power 100mW to 500mW. Regards Andy Andrew Price Principal Development Engineer (EMC Specialist) BAE SYSTEMS Avionics A125 Christopher Martin Road Basildon, Essex SS14 3EL tel: +44 (0) 1268 883308 email: andrew.p.pr...@baesystems.com This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
Metro Ethernet and Approval
Hi there , By looking at the http://www.metroethernet.org www.metroethernet.org I have been reading some recent information about “Ethernet” technology as metropolitan Ethernet. In the following article : http://www.vnunet.com/News/1139377 http://www.vnunet.com/News/1139377 “The completion of Metro Ethernet service specifications in August this year may accelerate the take-up of the technology by telecoms carriers, leading to a wider range of cheaper, faster, more reliable wide area network (Wan) services becoming available to corporates. “ Can somebody give me some light about the future work for approval ? Can we think reasonably that the new technology “Metro Ethernet” will require approval as it could extend a LAN to a WAN ? Thanks to share your thoughts Pierre-Marie Andre Senior Approval Engineer
