Russia EMC and safety applicability

[emc-p...@ieee.org]

Bonjour,

 

We have this external box which takes the DVI output from a computer or laptop
and converts it to broadcast-quality video. Our division wants to sell this in
every market possible and, in particular, Russia.

 

The unit has an external power supply, so my opinion is that this power supply
must be approved by the GOST-R for the safety aspect. 

 

For EMC it is not so clear if a video converter would fall into the
definitions of the GOST scheme and must be tested according to their
particular regulatory scheme. Mainland China has a list of product that have
to be tested that is based on the customs code. Does anyone know if a list
like that exists for Russia?

 

Thank for your help,

 

 

Benoit Nadeau

Conformity Group Manager

Matrox

-  This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/ 

To post a message to the list, send your e-mail to emc-p...@ieee.org 


Instructions: http://listserv.ieee.org/request/user-guide.html 


List rules: http://www.ieee-pses.org/listrules.html 


For help, send mail to the list administrators: 


Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org 


For policy questions, send mail to: 


Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com 


All emc-pstc postings are archived and searchable on the web at: 


http://www.ieeecommunities.org/emc-pstc 

Re: Audio-frequency Voltmeter for EN 55020 Immunity Testing

[emc-p...@ieee.org]

In message 
, 
dated Mon, 26 Jun 2006, "Shinn, John"  
writes
>I am still not sure what you are planning to measure - Voltage or 
>Acoustics. Normally Acoustics (sound pressure level) measurements use 
>one of the 4 filters with "A" being the most common.

It's quite normal for signal-to-noise ratios for consumer-type equipment 
to be expressed in terms of A-weighted noise, measured electrically. 
Professional equipment normally has it expressed in terms of ITU-R 468-4 
(CCIR 468-4) weighted, quasi-peak, noise.
-- 
OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk
2006 is YMMVI- Your mileage may vary immensely.

John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to emc-p...@ieee.org

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

 Scott Douglas   emcp...@ptcnh.net
 Mike Cantwell   mcantw...@ieee.org

For policy questions, send mail to:

 Jim Bacher: j.bac...@ieee.org
 David Heald:emc-p...@daveheald.com

All emc-pstc postings are archived and searchable on the web at:

http://www.ieeecommunities.org/emc-pstc

Re: EN Standards

[emc-p...@ieee.org]

Dear Grace,
 
We are buying ENs for our database customers via SEE Luxembourg (

http://jsappl.etat.lu/see/home.html?lang=ENG). The text is the original
CENELEC/CEN version (without front page of SEE). But pre-payment is required
(we are managing this as service for our clients)!
 
For example EN 55013:2001 costs only 42.80 EURO!
 
Mit freundlichen Grüßen
Yours sincerely
 
Dipl.-Ing. Michael Loerzer
Managing Director
Regulatory Affairs Specialist
Chairman of the Product Conformity Group (DIN ANP German Committee of
Standards Users)  
 
GLOBALNORM - Global Regulatory Compliance
Fon: +49 30 6392-3860, Direct Call: 3861
Fax: +49 30 6392-3863
 
Rudower Chaussee 29
12489 Berlin
Germany
 
  www.globalnorm.ca 
  www.Globalnorm.de

- Original Message - 
From: Grace Lin   
To: emc-p...@ieee.org 
Sent: Monday, June 26, 2006 5:36 PM
Subject: EN Standards

Dear All,
 
What are appropriate EN standards (BSI BS EN, CENELEC EN, DS DS/EN, etc.) that
I should order?  Take EN 55013 as an example.  From the IHS web site, the
following information (not a complete list) displays: 
 
 

BSI  BS EN 55013


2001-DEC-03 • Active/Current • 
Sound and television broadcast receivers and associated equipment Radio
disturbance characteristics Limits and methods of measurement-AMD 14680:
September 30, 2003; 

Hardcopy: $202.00

Electronic: Not Available

 


CENELEC  EN 55013


2001-OCT-01 • Active/Current • 
Sound and Television Broadcast Receivers and Associated Equipment - Radio
Disturbance Characteristics - Limits and Methods of Measurement-Including
amendment A1:2003; CISPR 13:2001 + A1:2003, modified 

Hardcopy: Call/Quote

Electronic: Not Available

 


DS  DS/EN 55013


2002-FEB-28 • Active/Current • 
Sound and television broadcast receivers and associated equipment - Radio
disturbance characteristics - Limits and methods of measurement 

Hardcopy: $67.00

Electronic: $67.00

 


DS  DS/EN 55013/A1


2003-MAY-22 • Active/Current • 
Sound and television broadcast receivers and associated equipment - Radio
disturbance characteristics - Limits and methods of measurement-(AMENDS DS/EN
55013) 

Hardcopy: $41.00

Electronic: $41.00

 
 
My questions are:
 
1. Is there any difference among BSI BS EN, CENELEC EN, DS DS/EN, etc., from
lab accreditator's point of view?  I believe the content of the standards are
identical.
2. Should I purchase "CENELEC EN 55013" since CENELEC is an European committee?
 
Thank you in advance for your help.
 
Best regards,
Grace Lin
Sr. Compliance Engineer
Crestron Electronics, Inc.
6 Volvo Drive
Rockleigh, NJ 07647
USA
www.crestron.com
 
 
 
 
 
-  This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/ 

To post a message to the list, send your e-mail to emc-p...@ieee.org 


Instructions: http://listserv.ieee.org/request/user-guide.html 


List rules: http://www.ieee-pses.org/listrules.html 


For help, send mail to the list administrators: 


Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org 


For policy questions, send mail to: 


Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com 


All emc-pstc postings are archived and searchable on the web at: 


http://www.ieeecommunities.org/emc-pstc 

-  This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/ 

To post a message to the list, send your e-mail to emc-p...@ieee.org 


Instructions: http://listserv.ieee.org/request/user-guide.html 


List rules: http://www.ieee-pses.org/listrules.html 


For help, send mail to the list administrators: 


Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org 


For policy questions, send mail to: 


Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com 


All emc-pstc postings are archived and searchable on the web at: 


http://www.ieeecommunities.org/emc-pstc