Satellite receiver
Group, Grateful for your views... I have been asked by the Turkish authorities to prove compliance to RTTE directive, 1999/5 for a satellite receiver, The unit sits between a satellite dish and our private network, it extracts IP content from DVB Mpeg2 stream and delivers it via fast ethernet Onto our network. I already comply to EMC directive and LVD directive, I don't believe that the RTTE directive applies. Thanks in advance for your response. Rob. Visit our Internet site at http://www.reuters.com Get closer to the financial markets with Reuters Messaging - for more information and to register, visit http://www.reuters.com/messaging Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Reuters Ltd. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
RE: Maintaining conductivity of freshly machined aluminum
Alocrom 1200 is a CHROMATE CONVERSION COATING system for Aluminium and aluminium alloys. We use a proprietary coating system which deposits a chromate coating onto an etched surface. Chromate coating is recommended for use prior to painting, but because of its ability to prevent atmospheric oxidation is often used without further finishing. Providing the thickness of coating is properly specified and regulated, it is possible for the conductive properties of the treated material to be sufficient to allow earth bonding without further mechanical treatment of the aluminium surface. Customers should refer to DEF-STAN 03-18 or MIL-C-5541 for further information as to the suitability of this treatment for their applications. We have used this treatment for a number of years on earth bonding to aluminium finished devices and it has been very successful. Regards Rob From: John Woodgate [mailto:j...@jmwa.demon.co.uk] Sent: 06 February 2003 09:47 To: emc-p...@majordomo.ieee.org Subject: Re: Maintaining conductivity of freshly machined aluminum I read in !emc-pstc that Scott Lacey wrote (in <3E4144F6.3539.FA6BC@localhost>) about 'Maintaining conductivity of freshly machined aluminum' on Wed, 5 Feb 2003: >Does anyone know of any conductive coating, preferably spray-on, >that could be used on mating aluminum chassis surfaces? We >manufacture (in very low volume) test equipment that is housed in a >commercially manufactured anodized aluminum enclosure. Our >machine shop mills the anodizing from mating surfaces and adds >additional screw holes to improve bonding. The concern is that the >surfaces will not remain conductive over time. Is there any evidence for such an effect (assuming a normal atmosphere, not especially spiked with corrosive gases)? I suspect not. If there is, than many existing products may be vulnerable! -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Visit our Internet site at http://www.reuters.com Get closer to the financial markets with Reuters Messaging - for more information and to register, visit http://www.reuters.com/messaging Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Reuters Ltd. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
Singapore and IDA license
I have been advised by the Singapore authorities that I need to get an IDA license . What is it and how do I get one? Thanks in anticipation Visit our Internet site at http://www.reuters.com Get closer to the financial markets with Reuters Messaging - for more information and to register, visit http://www.reuters.com/messaging Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Reuters Ltd. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
RE: safety testing in the USA
Dear All, Thank you for your postings, it has given me enough ammunition to persuade the supplier to change their point of view, they have now agreed to test correctly. Regards Rob - --- Visit our Internet site at http://www.reuters.com Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Reuters Ltd. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
safety testing in the USA
Group, I am in discussions with a potential supplier of IT equipment, Its our usual policy to request testing to a listed standard such as UL 60950 for safety in North America. The supplier has replied that this is not mandatory. Is he correct? what compels safety testing for IT equipment in this geography? is it mandated by law? Thanks in advance for your opinions Rob - --- Visit our Internet site at http://www.reuters.com Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Reuters Ltd. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
Mains cords
Can anyone tell me if equipment supplied as compliant to IEC60950 and has an IEC mains inlet plug has to be supplied with its mains cord if it is not supplied to an end user? Thanks for any help Rob -- -- Visit our Internet site at http://www.reuters.com Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Reuters Ltd. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.