Conductive epoxy bonding the probe to the surface?Calibrate with a current shunt. "Colorado" Brian 720-450-4933
---------- Forwarded Message ---------- From: Marko Radojicic <0000052300254e41-dmarc-requ...@listserv.ieee.org> To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] How to Measure Surface Conductivity? Date: Tue, 11 Apr 2023 13:00:08 -0700 Try a conductive elastomer on the DMM probes. Intent is to not scratch the surface. However from your description, new coating appears functionally equivalent especially if bonding mechanisms use any type of sharp edge (BeCu gasket, screw, etc) Sent from my mobilePlease excuse brevity & grammar On Apr 11, 2023, at 12:45 PM, Brian Kunde <bkundew...@gmail.com> wrote: I have been given two samples of metal plates; one plated in our current material and the other with a new plating material we want to switch to in production. I have been tasked to compare the electrical surface conductivity. What is the best way to do this? How is this done in the industry? I have tried the following methods;1. DMM (Ohm Meter) = inconclusive results2. Used 5 volts from a current limited power supply and measured the current = inconclusive results3. Used our Ground Bond Tester set to 60 amps. One plate measured 3-4mΩ, the other 1-3mΩ I measured 1 inch apart and from corner to corner. Test #3 above is the only test that showed any difference. BTW, I use 3/4" squares of soft braid material between the probes and surface. The probes are zeroed out between tests. So far, I can conclude that the new material is as good as, or slightly better than our current production plating material. What more can I do, within reason? Thanks to all.The Other Brian- ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
