RE: Battery pack for Schaffner NSG 435 ESD simulator
Use of another battery pack sounds simple enough, however it may not be. NiCad's can dump a lot of current and are a energy and fire hazard. You should make sure the replacement pack was enclosed in a fire enclosure and had the proper fuse/thermal protection in it. An off brand may not have the proper protection in them. You could build your own, but soldering to the cells hurts their performance and causes a miss match of the cells, which intern will hurt the life of the battery pack. If the cells are not matched, the cells can reverse charge other cells towards the end of each cycle. To get max performance you want to make sure the cells are from the same batch. Jim Jim Bacher, Senior Engineer Paxar Americas, Inc. e-mail: jim.bac...@paxar.com From: Naftali Shani [mailto:nsh...@catena.com] Sent: Wednesday, September 03, 2003 4:48 PM To: 'emc-pstc' Subject: Battery pack for Schaffner NSG 435 ESD simulator Folks, we have a need for a second battery pack for Schaffner NSG 435 ESD simulator. Other than Schaffner (which is a bit pricey), is there anyone else out there who makes these battery packs? Regards, Naftali Shani, Catena Networks (www.catena.com http://www.catena.com ) 307 Legget Drive, Ottawa, Ontario, Canada K2K 3C8 613.599.6430/866.2CATENA (X.8277); C 295.7042; F 599.0445 E-mail: nsh...@catena.com mailto:nsh...@catena.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
RE: Battery pack for Schaffner NSG 435 ESD simulator
Nafti I had the same issue within the last few weeks - and got a battery pack made by a Cell Pack Solutions http://www.cellpacksolutions.com in the UK. They only charged (no pun intended) about a quarter of the price Schaffner wanted, but they did have some difficulty getting the cells which are half AA size. They may do international sales. Ian Gordon -Original Message- From: Naftali Shani [mailto:nsh...@catena.com] Sent: 03 September 2003 21:48 To: 'emc-pstc' Subject: Battery pack for Schaffner NSG 435 ESD simulator Folks, we have a need for a second battery pack for Schaffner NSG 435 ESD simulator. Other than Schaffner (which is a bit pricey), is there anyone else out there who makes these battery packs? _ This e-mail has been scanned for viruses by MCI's Internet Managed Scanning Services - powered by MessageLabs. For further information visit http://www.mci.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
RE: Battery pack for Schaffner NSG 435 ESD simulator
Hi, it's easy to dismantle the pack and replace the cells, they are of standard size. Some soldering is needed. Ari -Original Message- From: ext Naftali Shani [mailto:nsh...@catena.com] Sent: Wednesday, September 03, 2003 11:48 PM To: 'emc-pstc' Subject: Battery pack for Schaffner NSG 435 ESD simulator Folks, we have a need for a second battery pack for Schaffner NSG 435 ESD simulator. Other than Schaffner (which is a bit pricey), is there anyone else out there who makes these battery packs? Regards, Naftali Shani, Catena Networks (www.catena.com http://www.catena.com ) 307 Legget Drive, Ottawa, Ontario, Canada K2K 3C8 613.599.6430/866.2CATENA (X.8277); C 295.7042; F 599.0445 E-mail: nsh...@catena.com mailto:nsh...@catena.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
Battery pack for Schaffner NSG 435 ESD simulator
Folks, we have a need for a second battery pack for Schaffner NSG 435 ESD simulator. Other than Schaffner (which is a bit pricey), is there anyone else out there who makes these battery packs? Regards, Naftali Shani, Catena Networks (www.catena.com http://www.catena.com ) 307 Legget Drive, Ottawa, Ontario, Canada K2K 3C8 613.599.6430/866.2CATENA (X.8277); C 295.7042; F 599.0445 E-mail: nsh...@catena.com mailto:nsh...@catena.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc