RE: China Standard for ITE product
Hello George, To speed up CCIB certification under the Import/Export Commodity Inspection Law Safety License System it is recommended to have the line cord plug CCEE certified. However, it is not mandatory. To the best of my knowledge there is no line cord standard for China (PRC), only component standards for the plug, cordage, and connector. Regards, Ron Wellman well...@corp.hp.com -Original Message- From: Non-HP-georgea /HP-PaloAlto,mimegw3/dd.HPMEXT1=geor...@lexmark.com Sent: Wednesday, August 11, 1999 6:12 AM To: Non-HP-emc-pstc /HP-PaloAlto,mimegw3/dd.HPMEXT1=emc-p...@majordomo.ieee.org Cc: Non-HP-georgea /HP-PaloAlto,mimegw3/dd.HPMEXT1=geor...@lexmark.com Subject: China Standard for ITE product The PRC GB 4943 is virtually equivalent to IEC 60950 (1995 version). The only delta I know of is that tests are to +/-10% rated voltage versus the norm of +6%/-10%. A CB Certificate/Test Report, though not required, is advised for time and cost purposes. The line cord must have CCEE approval and have the Great Wall mark. As of 1/1/00 all listed ITE must also meet EMC EMI requirements based on CISPR 22. This includes previously safety approved products. In summary, the requirements are not that much different from the global 230V community, although the process itself is the most complex I have encountered with many agencies/offices involved (SAIQ, CQC, CCIB, Review Offices, Testing Labs). George Alspaugh Corporate Product Safety Lexmark International Inc. -- Forwarded by George Alspaugh/Lex/Lexmark on 08/11/99 09:01 AM --- kr_1%compuserve@interlock.lexmark.com on 08/11/99 01:43:52 AM Please respond to kr_1%compuserve@interlock.lexmark.com To: sbtan%ctlsg.creaf@interlock.lexmark.com cc: emc-pstc%ieee@interlock.lexmark.com Subject: China Standard for ITE product Jess, I believe it is GB 4943 but it is only based on IEC 60950 and compliance with IEC 60950 does not equate to compliance with GB4943. You may wish to know also that GB 1002 is a Chinese standard for mains power plugs. Best regards, Kevin Hi, Could someone please advise as what is the China standard(GB ???) that is equivalent to IEC950 (for I.T.E. product)? Thanks in advance ! Jess - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators). --- Internet Header Sender: owner-emc-p...@majordomo.ieee.org Received: from ruebert.ieee.org (ruebert.ieee.org [199.172.136.3]) by hpamgaad.compuserve.com (8.8.8/8.8.8/HP-1.8) with ESMTP id WAA10932; Tue, 10 Aug 1999 22:51:10 -0400 (EDT) Received: by ruebert.ieee.org (8.8.8+Sun/8.8.8) id WAA15761; Tue, 10 Aug 1999 22:41:06 -0400 (EDT) From: sb...@ctlsg.creaf.com X-Lotus-FromDomain: CREATIVE@CREAF To: EMC-PSTC (E-mail) emc-p...@ieee.org Message-ID: 482567ca.000f006b...@ctlsgg01.ctlsg.creaf.com Date: Wed, 11 Aug 1999 10:43:36 +0800 Subject: China Standard for ITE product Mime-Version: 1.0 Content-type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-emc-p...@majordomo.ieee.org Precedence: bulk Reply-To: sb...@ctlsg.creaf.com X-Resent-To: Multiple Recipients emc-p...@majordomo.ieee.org X-Listname: emc-pstc X-Info: Help requests to emc-pstc-requ...@majordomo.ieee.org X-Info: [Un]Subscribe requests to majord...@majordomo.ieee.org X-Moderator-Address: emc-pstc-appro...@majordomo.ieee.org Best regards, Kevin Richardson Stanimore Pty Limited (Technology Requirements Specialists) Ph: 02-4329-4070 Fax: 02-4328-5639 Int'l +61-2-432x- Email: k...@compuserve.com (Internet) kevin.richard...@ieee.org (Alternate Internet #1) k...@technologist.com (Alternate Internet #2) 100356,374 (Compuserve) - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators). - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators). File: China Standard for ITE product.TXT
China Standard for ITE product
The PRC GB 4943 is virtually equivalent to IEC 60950 (1995 version). The only delta I know of is that tests are to +/-10% rated voltage versus the norm of +6%/-10%. A CB Certificate/Test Report, though not required, is advised for time and cost purposes. The line cord must have CCEE approval and have the Great Wall mark. As of 1/1/00 all listed ITE must also meet EMC EMI requirements based on CISPR 22. This includes previously safety approved products. In summary, the requirements are not that much different from the global 230V community, although the process itself is the most complex I have encountered with many agencies/offices involved (SAIQ, CQC, CCIB, Review Offices, Testing Labs). George Alspaugh Corporate Product Safety Lexmark International Inc. -- Forwarded by George Alspaugh/Lex/Lexmark on 08/11/99 09:01 AM --- kr_1%compuserve@interlock.lexmark.com on 08/11/99 01:43:52 AM Please respond to kr_1%compuserve@interlock.lexmark.com To: sbtan%ctlsg.creaf@interlock.lexmark.com cc: emc-pstc%ieee@interlock.lexmark.com Subject: China Standard for ITE product Jess, I believe it is GB 4943 but it is only based on IEC 60950 and compliance with IEC 60950 does not equate to compliance with GB4943. You may wish to know also that GB 1002 is a Chinese standard for mains power plugs. Best regards, Kevin Hi, Could someone please advise as what is the China standard(GB ???) that is equivalent to IEC950 (for I.T.E. product)? Thanks in advance ! Jess - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators). --- Internet Header Sender: owner-emc-p...@majordomo.ieee.org Received: from ruebert.ieee.org (ruebert.ieee.org [199.172.136.3]) by hpamgaad.compuserve.com (8.8.8/8.8.8/HP-1.8) with ESMTP id WAA10932; Tue, 10 Aug 1999 22:51:10 -0400 (EDT) Received: by ruebert.ieee.org (8.8.8+Sun/8.8.8) id WAA15761; Tue, 10 Aug 1999 22:41:06 -0400 (EDT) From: sb...@ctlsg.creaf.com X-Lotus-FromDomain: CREATIVE@CREAF To: EMC-PSTC (E-mail) emc-p...@ieee.org Message-ID: 482567ca.000f006b...@ctlsgg01.ctlsg.creaf.com Date: Wed, 11 Aug 1999 10:43:36 +0800 Subject: China Standard for ITE product Mime-Version: 1.0 Content-type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-emc-p...@majordomo.ieee.org Precedence: bulk Reply-To: sb...@ctlsg.creaf.com X-Resent-To: Multiple Recipients emc-p...@majordomo.ieee.org X-Listname: emc-pstc X-Info: Help requests to emc-pstc-requ...@majordomo.ieee.org X-Info: [Un]Subscribe requests to majord...@majordomo.ieee.org X-Moderator-Address: emc-pstc-appro...@majordomo.ieee.org Best regards, Kevin Richardson Stanimore Pty Limited (Technology Requirements Specialists) Ph: 02-4329-4070 Fax: 02-4328-5639 Int'l +61-2-432x- Email: k...@compuserve.com (Internet) kevin.richard...@ieee.org (Alternate Internet #1) k...@technologist.com (Alternate Internet #2) 100356,374 (Compuserve) - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators). - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).
Re: China Standard for ITE product
Jess, The equivalent China standard to IEC 950 is GB-4943. I have just started to undertake some ITE approvals in China. If you want to discuss anything 'off line' contact me below. Regards Tony Reynolds Principal Compliance Engineer Pitney Bowes (UK) Ltd Tel (0) 1279 449479 Fax (0) 1279 449118 E Mail: reyno...@pb.com __ Reply Separator _ Subject: China Standard for ITE product Author: sb...@ctlsg.creaf.com at smtpgwy List-Post: emc-pstc@listserv.ieee.org Date:11/08/99 10:43 Hi, Could someone please advise as what is the China standard(GB ???) that is equivalent to IEC950 (for I.T.E. product)? Thanks in advance ! Jess - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators). - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).
China Standard for ITE product
Jess, I believe it is GB 4943 but it is only based on IEC 60950 and compliance with IEC 60950 does not equate to compliance with GB4943. You may wish to know also that GB 1002 is a Chinese standard for mains power plugs. Best regards, Kevin Hi, Could someone please advise as what is the China standard(GB ???) that is equivalent to IEC950 (for I.T.E. product)? Thanks in advance ! Jess - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators). --- Internet Header Sender: owner-emc-p...@majordomo.ieee.org Received: from ruebert.ieee.org (ruebert.ieee.org [199.172.136.3]) by hpamgaad.compuserve.com (8.8.8/8.8.8/HP-1.8) with ESMTP id WAA10932; Tue, 10 Aug 1999 22:51:10 -0400 (EDT) Received: by ruebert.ieee.org (8.8.8+Sun/8.8.8) id WAA15761; Tue, 10 Aug 1999 22:41:06 -0400 (EDT) From: sb...@ctlsg.creaf.com X-Lotus-FromDomain: CREATIVE@CREAF To: EMC-PSTC (E-mail) emc-p...@ieee.org Message-ID: 482567ca.000f006b...@ctlsgg01.ctlsg.creaf.com Date: Wed, 11 Aug 1999 10:43:36 +0800 Subject: China Standard for ITE product Mime-Version: 1.0 Content-type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-emc-p...@majordomo.ieee.org Precedence: bulk Reply-To: sb...@ctlsg.creaf.com X-Resent-To: Multiple Recipients emc-p...@majordomo.ieee.org X-Listname: emc-pstc X-Info: Help requests to emc-pstc-requ...@majordomo.ieee.org X-Info: [Un]Subscribe requests to majord...@majordomo.ieee.org X-Moderator-Address: emc-pstc-appro...@majordomo.ieee.org Best regards, Kevin Richardson Stanimore Pty Limited (Technology Requirements Specialists) Ph: 02-4329-4070 Fax: 02-4328-5639 Int'l +61-2-432x- Email: k...@compuserve.com (Internet) kevin.richard...@ieee.org (Alternate Internet #1) k...@technologist.com (Alternate Internet #2) 100356,374 (Compuserve) - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).
China Standard for ITE product
Hi, Could someone please advise as what is the China standard(GB ???) that is equivalent to IEC950 (for I.T.E. product)? Thanks in advance ! Jess - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).
