RE: EN 60601-1-2 50Hz or 60Hz
I think the 60601-1-2 TC Interpretation Sheet (IS 01 60601-1-2) in the following link may answer your question: http://www.iecee.org/ctl/TC_interpretation.htm#60601 Nick From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Andrew Robbins Sent: Friday, July 16, 2010 10:02 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: EN 60601-1-2 50Hz or 60Hz Friends and colleagues: Customer needs to perform EMC testing (EN 60601-1-2:2007) on a large medical device that is rated to operate 240VAC/60Hz or 220VAC/50Hz. They intend to use the reports to support an FDA submittal for sales in the US and CE marking for sales in the EU. Is it typical that the testing is performed twice, once with power input at 240/60 and again at 220/50? Andrew Robbins This message contains information that may be privileged or confidential and is the property of the Nemko Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message. Nemko Group can not be held responsible for transmission errors nor confidentiality of mail and faxes. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas Mike Cantwell For policy questions, send mail to: Jim Bacher David Heald - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas Mike Cantwell For policy questions, send mail to: Jim Bacher David Heald
Re: EN 60601-1-2 50Hz or 60Hz
In message , dated Fri, 16 Jul 2010, Andrew Robbins writes: > Is it typical that the testing is performed twice, once with power >input at 240/60 and again at 220/50? Not quite. Twice, yes, but 230/50, not 220/50. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK I should be disillusioned, but it's not worth the effort. O But I support unbloated email http://www.asciiribbon.org//\ - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas Mike Cantwell For policy questions, send mail to: Jim Bacher: David Heald:
Re: EN 60601-1-2 and Annex ZA
In message , dated Tue, 14 Apr 2009, pat.law...@slpower.com writes: >I'm reading EN 60601-1-2:2001, and I'm not clear on a sentence in Annex >ZA. It says: "For undated references the latest edition of the >publication referred to applies (including amendments)." > >1) Is it the 'latest edition' when EN 60601-1-2:2001 was published? The >annex lists the valid edition at that time. For example, EN >61000-4-4:1995 No. > >2) Or is it the 'latest edition' at the time the system is tested? In >this case, EN 61000-4-4:2005 Yes. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk Things can always get better. But that's not the only option. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas Mike Cantwell For policy questions, send mail to: Jim Bacher: David Heald:
RE: EN 60601-1-2 and Annex ZA
Hi, Cenelec Guide 25 answers this in its Clause 4 (k): When there is an undated reference to a basic standard, then either the latest edition or (if the date of withdrawal of conflicting standards associated with the latest edition has not expired) the superseded edition may be applied. After the date of withdrawal, the latest edition shall be applied. So it's the #2 in your question. Regards, Ari Honkala SGS Fimko, Finland From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of pat.law...@slpower.com Sent: 15. huhtikuuta 2009 3:52 To: emc-p...@ieee.org Subject: EN 60601-1-2 and Annex ZA To all: I'm reading EN 60601-1-2:2001, and I'm not clear on a sentence in Annex ZA. It says: "For undated references the latest edition of the publication referred to applies (including amendments)." 1) Is it the 'latest edition' when EN 60601-1-2:2001 was published? The annex lists the valid edition at that time. For example, EN 61000-4-4:1995 2) Or is it the 'latest edition' at the time the system is tested? In this case, EN 61000-4-4:2005 Pat Lawler EMC Engineer SL Power Electronics Corp. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas Mike Cantwell For policy questions, send mail to: Jim Bacher: David Heald: Information in this email and any attachments is confidential and intended solely for the use of the individual(s) to whom it is addressed or otherwise directed. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the Company. Finally, the recipient should check this email and any attachments for the presence of viruses. The Company accepts no liability for any damage caused by any virus transmitted by this email. All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/terms_and_conditions.htm - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas Mike Cantwell For policy questions, send mail to: Jim Bacher: David Heald:
Re: EN 60601-1 voltages
Kim, Clause 57.10 (a), second tick states "The value of the reference voltage (U) is as given in Sub-clause 20.3". I think this is quite clear. Jon Griver http://www.601help.com The Medical Device Designer's Guide to IEC 60601-1 > Hi all > > When determining insulation and creepage/clearance you use a "reference > voltage". > > In § 20.3 (concerning insulation test voltage ) it say that the voltage is > a > arithmetic sum of ex. prim. voltage + sec. voltage. > > (EX.: A PSU fed with 230 Vac and a sec. of 30 Vdc will give 260 V over the > insulation) > > But in §57.10 this method is not described when using "reference voltage" > for creepage/clearance. Would it be OK to use the 230 Vac to determine the > distance ? > > Best regards, > > Kim Boll Jensen > Bolls Rådgivning > Ved Gadekæret 11F > DK-3660 Stenløse > > Tlf.: 48 18 35 66 > Fax: 48 18 35 30 > Mobil: 22 99 69 91 > > E-mail: k...@bolls.dk > web: www.bolls.dk > > > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list.Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to emc-p...@ieee.org > > Instructions: http://listserv.ieee.org/listserv/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas emcp...@ptcnh.net > Mike Cantwellmcantw...@ieee.org > > For policy questions, send mail to: > > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwellmcantw...@ieee.org For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
Re: EN 60601-1-2
Bob Heller wrote: >> ...common sense to me that you would want your equipment to conform to Class B especially if you are using it in an operating room or an intensive care unit but I cannot find this in the standard. It seems to imply that equipment can be either Class A or Class B especially in hospitals that are on their own power system. Have I overlooked something? << Well, the emissions test applies the limits of CISPR-11; A or B depending on what level of protection must be afforded radio users. You'll remember that there has been some controversy over approving use of electrosurgical equipment in residential environments. I'd think a good deal of the answer comes from one's customers. Would hospitals tolerate interference with RF patient monitoring? ER ambulance comms? How often, and how much? Running an electrocautery device might be tolerated for a few moments; a constant dead carrier on-channel >from a digital clock might be quite another matter. I think perhaps it is asking too much of a standard for devices to prescribe interference levels for facilities. But it would not surprise me if there were a European EMC standard for medical facilities. Cortland Richmond This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Scott Douglas emcp...@ptcnh.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
Re: EN 60601-1-2
You haven't overlooked anything Bob. The standard was written to allow the intended use environment dictate the emissions class. In most of Europe, the hospital is considered a Class A emissions environment (Dutch Natioanl Committee doesn't like that). Home use is clearly Class B. One of the tasks our committee (SC62A MT-23) is tasked to do is create recommendations for emissions and immunity levels for other environments such as transport (ambulance, air, etc). Regards, Brent DeWitt Laboratory Manager CKC Laboratories Redmond, WA From: rehel...@mmm.com Sent: Oct 27, 2004 7:01 AM To: emc-p...@ieee.org Subject: EN 60601-1-2 In the 2002 version of EN 60601-1-2, I cannot find specific emission level requirements for equipment that is sold for use in a hospital. It seems common sense to me that you would want your equipment to conform to Class B especially if you are using it in an operating room or an intensive care unit but I cannot find this in the standard. It seems to imply that equipment can be either Class A or Class B especially in hospitals that are on their own power system. Have I overlooked something? Bob Heller 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651- 778-6336 Fax: 651-778-6252 === This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Scott Douglas emcp...@ptcnh.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Scott Douglas emcp...@ptcnh.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
RE: EN 60601-1-2/ EN 55022: 1998
EN 60601-1-2:2001 was just published in the OJ. The CENELEC web site has not been updated yet. Best Regards, Jim Jim Conrad, Convenor IEC SC62A/MT23 P.O. Box 25 Hamilton, MA 01936 U.S.A. E-mail: jc...@shore.net Phone: 978-468-3909 FAX: 978-468-1034 From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of ITL-EMC User Group Sent: Monday, January 06, 2003 12:57 AM To: Emc-Pstc Group (E-mail) Subject: EN 60601-1-2/ EN 55022: 1998 Thanks to all who replied. I was pretty sure about EN 55022: 1998 but wanted to make sure. Anything about the new edition of IEC/EN 60601-1-2? > David Shidlowsky > Technical Writer > EMC Laboratory > ITL (Product Testing) Ltd. > Kfar Bin Nun > Israel > Tel: +972-8-9797799 > Fax: +972-8-9797702 > Email: dav...@itl.co.il > http://www.itl.co.il > http://www.i-spec.com > This e-mail message may contain privileged or confidential information. If > you are not the intended recipient, you may not disclose, use, > disseminate, distribute, copy or rely upon this message or attachment in > any way. If you received this e-mail message in error, please return by > forwarding the message and its attachments to the sender. > > > > -Original Message- > From: ITL-EMC User Group > Sent: Sunday, January 05, 2003 7:50 AM > To: Emc-Pstc Group (E-mail) > Subject: EN 60601-1-2/ EN 55022: 1998 > > Dear All, > I have read in various places that the new edition of IEC/EN 60601-1-2 is > in effect (FDA in the US). > As yet, only EN 60601-1-2: 1993 is listed in the OJ (December 2002). > Does anyone know when the new edition will be listed in the OJ and thus > become official? > Regarding EN 55022: 1998 + Amendment A1: 2000, I have also read that the > application of this standard is being delayed. Does anyone have any > information as to when it will become applicable? > Thanks > David Shidlowsky > Technical Writer > EMC Laboratory > ITL (Product Testing) Ltd. > Kfar Bin Nun > Israel > Tel: +972-8-9797799 > Fax: +972-8-9797702 > Email: dav...@itl.co.il > http://www.itl.co.il > http://www.i-spec.com > This e-mail message may contain privileged or confidential information. If > you are not the intended recipient, you may not disclose, use, > disseminate, distribute, copy or rely upon this message or attachment in > any way. If you received this e-mail message in error, please return by > forwarding the message and its attachments to the sender. > > This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
Re: EN 60601-1-2/ EN 55022: 1998
David, EN 60601-1-2:2001 (i.e. IEC 60601-1-2) was published in the Official Journal Dec 13, 2002 with reference to the MDD, i.e. it is now officially harmonized. The date of cessation of presumption of conformity by applying the superseded standard EN 60601-1-2:1993 has been set to 2004-11-01 (Nov. 1, 2004). Regards, Brent DeWitt Datex-Ohmeda Louisville, CO ITL-EMC User Group @majordomo.ieee.org on 04-01-2003 10:46:59 PM Please respond to ITL-EMC User Group Sent by: owner-emc-p...@majordomo.ieee.org To: "Emc-Pstc Group (E-mail)" cc: Subject: EN 60601-1-2/ EN 55022: 1998 Dear All, I have read in various places that the new edition of IEC/EN 60601-1-2 is in effect (FDA in the US). As yet, only EN 60601-1-2: 1993 is listed in the OJ (December 2002). Does anyone know when the new edition will be listed in the OJ and thus become official? Regarding EN 55022: 1998 + Amendment A1: 2000, I have also read that the application of this standard is being delayed. Does anyone have any information as to when it will become applicable? Thanks > David Shidlowsky > Technical Writer > EMC Laboratory > ITL (Product Testing) Ltd. > Kfar Bin Nun > Israel > Tel: +972-8-9797799 > Fax: +972-8-9797702 > Email: dav...@itl.co.il > http://www.itl.co.il > http://www.i-spec.com > This e-mail message may contain privileged or confidential information. If > you are not the intended recipient, you may not disclose, use, > disseminate, distribute, copy or rely upon this message or attachment in > any way. If you received this e-mail message in error, please return by > forwarding the message and its attachments to the sender. > > This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
Re: EN 60601-1-2/ EN 55022: 1998
I read in !emc-pstc that John Barnes wrote (in <3e184ad6.7...@iglou.com>) about 'EN 60601-1-2/ EN 55022: 1998' on Sun, 5 Jan 2003: >The date of cessation of presumption >on conformity of the superseded standard (DOPOCOSS) is 1 AUG 2003. You left out one of the molecules of carbon monoxide: it's DOCOPOCOSS. (;-) -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
Re: EN 60601-1-2/ EN 55022: 1998
David, EN 55022:1998 + Amendment A1:2000 was listed in the Official Journal of the European Community on 26 JUL 2001, in C208 Volume 44. So you have had the *option* of using it since then. It is still included in the latest listing of harmonized standards for the EMC directive, which came out 7 DEC 2002, in C304 Volume 45. The date of cessation of presumption on conformity of the superseded standard (DOPOCOSS) is 1 AUG 2003. So EN 55022:1994 and its amendments are valid for only another seven months. This worries a number of EMC and design engineers that I know, because EN 55022:1998 has Conducted Common Mode Voltage/Current Limits for Telecommunication Ports that aren't in EN 55022:1994. And to date, local area network (LAN) ports like Ethernet have had a very hard time meeting these limits. If you would like a lot more information about EN 55022, please read our web page about emission standards for ITE at: http://www.dbicorporation.com/emission.htm John Barnes KS4GL, PE, NCE, ESDC Eng, SM IEEE dBi Corporation http://www.dbicorporation.com/ This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
RE: EN 60601-1-2/ EN 55022: 1998
Hello David, Regarding EN 55022: 1998 + Amendment A1: 2000 are to become effective 1. August 2003, see latest OJ-list at http://europa.eu.int/comm/enterprise/newapproach/standardization/harmstds/wh atsnew.html Best regards Helge Knudsen Niros Telecommunication Hirsemarken 5 DK-3520 Farum Denmark Tel +45 44 34 22 51 Fax +45 44 99 28 08 email h.knud...@niros.com From: ITL-EMC User Group To: Emc-Pstc Group (E-mail) Sent: 05-01-2003 06:46 Subject: EN 60601-1-2/ EN 55022: 1998 Dear All, I have read in various places that the new edition of IEC/EN 60601-1-2 is in effect (FDA in the US). As yet, only EN 60601-1-2: 1993 is listed in the OJ (December 2002). Does anyone know when the new edition will be listed in the OJ and thus become official? Regarding EN 55022: 1998 + Amendment A1: 2000, I have also read that the application of this standard is being delayed. Does anyone have any information as to when it will become applicable? Thanks > David Shidlowsky > Technical Writer > EMC Laboratory > ITL (Product Testing) Ltd. > Kfar Bin Nun > Israel > Tel: +972-8-9797799 > Fax: +972-8-9797702 > Email: dav...@itl.co.il > http://www.itl.co.il > http://www.i-spec.com > This e-mail message may contain privileged or confidential information. If > you are not the intended recipient, you may not disclose, use, > disseminate, distribute, copy or rely upon this message or attachment in > any way. If you received this e-mail message in error, please return by > forwarding the message and its attachments to the sender. > > This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
RE: EN 60601-1-2
It seems a bit strange that they have not listed it in the OJ yet but I am told it is coming soon. I think the important thing is that CENELEC approved it in Sept of 2001 and have now published the DOR, DOP, DOW on their web site. Now we just have to wait for the OJ publication that should happen in November. Best Regards, Jim Jim Conrad, Convenor IEC SC62A/MT23 P.O. Box 25 Hamilton, MA 01936 U.S.A. E-mail: jc...@shore.net Phone: 978-468-3909 FAX: 978-468-1034 -Original Message- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of ITL-EMC User Group Sent: Tuesday, September 24, 2002 2:51 AM To: emc-p...@majordomo.ieee.org Subject: EN 60601-1-2 Hi all, Has anyone heard when the latest edition of EN 60601-1-2 will be published in the Official Journal? I have received enquiries from customers regarding the new edition. Thanks to anyone who can help. Regards David Shidlowsky Technical Writer EMC Laboratory ITL (Product Testing) Ltd. Kfar Bin Nun Israel Tel: +972-8-9797799 Fax: +972-8-9797702 Email: dav...@itl.co.il http://www.itl.co.il http://www.i-spec.com This e-mail message may contain privileged or confidential information. If you are not the intended recipient, you may not disclose, use, disseminate, distribute, copy or rely upon this message or attachment in any way. If you received this e-mail message in error, please return by forwarding the message and its attachments to the sender. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
RE: EN 60601
Kim, I checked the IEC website and they have a list of all the TRFs in the following link. Unfortunately, I was unable to locate the EN 60601-1 TRF https://domino.iec.ch/webstore/home.nsf/webstore_search.htm?OpenPage Please note that the IEC 601-1 TRF I have (received from the test agencies we work with), states that the TRF originator is UL. Therefore, for your copy you should try by calling the UL office in Denmark (Demko) or the UL office in Frankfurt, Germany. Regards, This e-mail message may contain privileged or confidential information. If you are not the intended recipient, you may not disclose, use, disseminate, distribute, copy or rely upon this message or attachment in any way. If you received this e-mail message in error, please return by forwarding the message and its attachments to the sender. PETER S. MERGUERIAN Technical Director I.T.L. (Product Testing) Ltd. 26 Hacharoshet St., POB 211 Or Yehuda 60251, Israel Tel: + 972-(0)3-5339022 Fax: + 972-(0)3-5339019 Mobile: + 972-(0)54-838175 http://www.itl.co.il http://www.i-spec.com -Original Message- From: Kim Boll Jensen [mailto:kimb...@post7.tele.dk] Sent: Wednesday, August 28, 2002 3:00 PM To: EMC-PSTC Subject: EN 60601 Hi all I need a report form like those used in the CB scheme for EN 60601-1-1;2001 and for EN 60601-1 + A1, 2, 12, 13. I can't find anywhere to buy it. So could some one help me to get a copy or tell me where to buy them. Best regards, Kim Boll Jensen Bolls Raadgivning Denmark --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
re: EN 60601-1
Hello, According to our standards coordinator, you can purchase this standard from ANSI. Ned Devine TUV Product Service ndev...@tuvps.com - Original Text From: "Ned Devine" , on 03/11/1997 3:10 PM: To: , Hello, EN 60601-1 does exist. The current version is EN 60601-1:1990+A1:1993+A2:1995. This is the general requirements for safety of medical electrical equipment. EN60601-1-1 is the collateral standard for safety requirements for medical electrical systems. Ned Devine TUV Product Service ndev...@tuvps.com - Original Text From: COLON KELLY , on 03/11/1997 11:16 AM: To: Hello All- I've been trying to get some information on EN 60601-1. The 1995 CENELEC catalog lists this standard, but when I called Global Engineering and BSI to get costs, they didn't have it on their databases. They did have EN 60601-1-1. Is EN 60601-1-1 the appropriate part 1 standard? Does EN 60601-1 exist anymore? Thanks in advance. Kelly Colon Regulatory Engineer Regulatory Engineering Symbol Technologies, Inc. phone: 516 738 3480 fax: 516 738 3318 e-mail: col...@symbol.com --> ATTACHMENT: ATTRIBS.BND <-- begin 666 ATTRIBS.BND M0F5Y;VYD(%!A8VME9"!!='1R:6)U=&5S```+0514*```2!R97%U:7)E;65N=',@9F]R(&UE9&EC86P@96QE8W1R:6-A;"!S>7-T M96US+@H*3F5D($1E=FEN90I4558@4')O9'5C="!397)V:6-E"FYD979I;F5` M='5V<',N8V]M"BTM+2TM+2TM+2TM+2T*3W)I9VEN86P@5&5X=`I&6EN9R!T;R!G970@6]U M(&-A;B!P=7)C:&%S92!T:&ES('-T86YD87)D(&9R;VT@04Y322X*"DYE9"!$ M979I;F4*5%56(%!R;V1U8W0@4V5R=FEC90IN9&5V:6YE0'1U=G!S+F-O;;4` M`P",`*X``0`!!P`!``$``0",`#C_O`(` M`$U3(%-A;G,@4V5R:68```$``0`(``$` M"0`)``$`"@!;``$`7`!<``$`70!G``$`:`![``$`?`"- M`&0``>`!`<`#`:`%`8`'`6`)`4`+`2`-`0`/`>`0`<`2`:`4`8`6`6`8`4`: M+@``$0`-`%\&``!/6UB;VPN8V]M/@H*2&5L;&\L"@I%3B`V,#8P,2TQ(&1O M97,@97AI2`*;V8@;65D:6-A;"!E;&5C=')I8V%L M(&5Q=6EP;65N="X@($5.-C`V,#$M,2TQ(&ES('1H92!C;VQL871E2!D:60@:&%V92!%3B`*-C`V,#$M,2TQ+B`@27,@14X@-C`V,#$M,2TQ('1H M92!A<'!R;W!R:6%T92!P87)T(#$@6UO2!%;F=I;F5E2!%;F=I;F5E M6UB;VP@5&5C:&YO;&]G:65S+"!);F,N"G!H;VYE.B`@-3$V(##H@(#4Q-B`W,S@@,S,Q.`IE+6UA:6PZ("!C;VQO;FM``!`<`#`:`%`8`'`6`)`4`+`2`-`0`/`>`0`<`2 M`:`4`8`6`6`8`4`:```1``0`1P$` M`%1E>'2,`$AE;&QO+"`*"D%C8V]R9&EN9R!T;R!O=7(@
re: EN 60601-1
Hello, EN 60601-1 does exist. The current version is EN 60601-1:1990+A1:1993+A2:1995. This is the general requirements for safety of medical electrical equipment. EN60601-1-1 is the collateral standard for safety requirements for medical electrical systems. Ned Devine TUV Product Service ndev...@tuvps.com - Original Text From: COLON KELLY , on 03/11/1997 11:16 AM: To: Hello All- I've been trying to get some information on EN 60601-1. The 1995 CENELEC catalog lists this standard, but when I called Global Engineering and BSI to get costs, they didn't have it on their databases. They did have EN 60601-1-1. Is EN 60601-1-1 the appropriate part 1 standard? Does EN 60601-1 exist anymore? Thanks in advance. Kelly Colon Regulatory Engineer Regulatory Engineering Symbol Technologies, Inc. phone: 516 738 3480 fax: 516 738 3318 e-mail: col...@symbol.com begin 666 ATTRIBS.BND M0F5Y;VYD(%!A8VME9"!!='1R:6)U=&5S```+0514*```6UB;VPN8V]M/BP@;VX@,#,O,3$O,3DY-R`Q M,3HQ-B!!33H*5&\Z(#QE;6,M<'-T8T!I965E+F]R9SX*"DAE;&QO($%L;"T* M"DDG=F4@8F5E;B!T2!D:61N)W0@:&%V M92!I="!O;B!T:&5I2!#;VQO;@I296=U;&%T;W)Y M($5N9VEN965R(`I296=U;&%T;W)Y($5N9VEN965R:6YG"E-Y;6)O;"!496-H M;F]L;V=I97,L($EN8RX*<&AO;F4Z("`U,38@-S,X(#,T.#`*9F%X.B`@-3$V M(#6UB;VPN8V]M"@J(`0,`>`*" M`0(``@```!8``@`!``$`6``"`%D`(`(X_P```+P" M``!-4R!386YS(%-E`!`<`#`:`%`8`'`6`) M`4`+`2`-`0`/`>`0`<`2`:`4`8`6`6`8`4`:```1``0`\@$` M`%1E>'0W`4AE;&QO+`H*14X@-C`V,#$M,2!D;V5S M(&5X:7-T+B`@5&AE(&-U2!O9B!M961I8V%L(&5L96-T2!R97%U:7)E;65N=',@9F]R(&UE9&EC86P@96QE8W1R M:6-A;"!S>7-T96US+@H*3F5D($1E=FEN90I4558@4')O9'5C="!397)V:6-E M"FYD979I;F5`='5V<',N8V]MM0`#`#'1X`D9R;VTZ($-/3$].($M%3$Q9(#QC M;VQO;FM`2!D:60@:&%V92!%3B`*-C`V,#$M,2TQ+B`@ M27,@14X@-C`V,#$M,2TQ('1H92!A<'!R;W!R:6%T92!P87)T(#$@6UO2!%;F=I;F5E2!%;F=I;F5E6UB;VP@5&5C:&YO;&]G:65S+"!) M;F,N"G!H;VYE.B`@-3$V(##H@(#4Q-B`W,S@@,S,Q.`IE M+6UA:6PZ("!C;VQO;FM`&ES="X@(%1H M92!C=7)R96YT('9E`!`<`#`:`%`8`'`6`)`4`+`2`-`0`/`>`0`<`2`:`4 ,`8`6`6`8`4`:90`` ` end