Thank you to all those who replied re this question.
Best regards,
Kevin Richardson
Stanimore Pty Limited
Compliance Advice Solutions for Technology
(Legislation/Regulations/Standards/Australian Agent Services)
Ph: 02-4329-4070 (Int'l: +61-2-4329-4070)
Fax: 02-4328-5639 (Int'l: +61-2-4328-5639)
Mobile: 04-1224-1620 (Int'l: +61-4-1224-1620)
Email:kevin.richard...@ieee.org
This material (this message and the information contained in all attachments
to this message) is confidential and/or privileged information and is
intended only for the addressee/s named above. Any unauthorised
dissemination, copying, use of or reliance upon this material by persons or
entities other than the addressee/s named above is prohibited. If you
receive this material in error, please notify Stanimore Pty Limited and
destroy all copies (electronic and hardcopy) of this message and all
attachments immediately.
-Original Message-
From: owner-emc-p...@majordomo.ieee.org
[mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of John Woodgate
Sent: Tuesday, 3 December 2002 10:11 PM
To: emc-p...@majordomo.ieee.org
Subject: Re: Surge Protection EN 60439-1
I read in !emc-pstc that Kevin Richardson kevin.richard...@ieee.org
wrote (in nebbihdflagbliikmlbkgeabdnaa.kevin.richard...@ieee.org)
about 'Surge Protection EN 60439-1' on Tue, 3 Dec 2002:
Can anyone please advise if EN 60439-1 allows the practice of placing a
surge protection device (eg an MOV) across the mains input (active to
earth)
is accepted.
The MOV would probably be set at something like 420 vAC or RMS so probably
about 600 peak.
Whether it does or not, DON'T DO IT! It's now considered dangerous.
There is alleged to be an exemption for hard-wired equipment (not plug-
in) with tow separate earth paths back to the fusebox (which a British
ring-main does automatically, but not a spur), but I've not seen any
official text yet.
--
Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk
Interested in professional sound reinforcement and distribution? Then go to
http://www.isce.org.uk
PLEASE do NOT copy news posts to me by E-MAIL!
---
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: emc-p...@hypercom.com
Dave Heald: davehe...@attbi.com
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on browse and then emc-pstc mailing list
---
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: emc-p...@hypercom.com
Dave Heald: davehe...@attbi.com
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on browse and then emc-pstc mailing list