Re: [Emc-users] Install problems
... use apt to install additional packages required to rebuild emc2: sudo apt-get build-dep emc2 ... http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2#Preparing_Ubuntu_to_compile_emc2 Jeff - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Hal Implementation of a different enable
The implementation of the enable in the stepper example, causes it to come on when the machine is turned on. I need an enable only while a position is being commanded and then subsequently removed. My stepper motor driver which uses a quadrature input, needs a special enable signal. The driver itself implements a holding current when the quadrature input stops changing. This is triggered about 5 seconds after the enable is removed. So the question is how can this type of enable be generated by hal. (Starts with motion command and ends subsequently). Jack Ensor - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Fw: Re: Axis GUI]
I'm away right now, maybe someone else can look at the email issue? Regards, Alex - Original Message - From: Jim Wilkin To: [EMAIL PROTECTED] Sent: Monday, March 05, 2007 4:14 PM Subject: [Fwd: Re: [Emc-users] Axis GUI] After repeated attempts via emc users .Rejected every time. Perhaps you can tell me what is wrong with the address. Original Message Subject: Re: [Emc-users] Axis GUI Date: Mon, 05 Mar 2007 09:03:21 -0500 From: Jim Wilkin <[EMAIL PROTECTED]> To: Enhanced Machine Controller (EMC) References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Hello Would like to know if there is a way to start the g code part program form any block of code? JIM No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 268.18.7/710 - Release Date: 4.3.2007 13:58 - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Hal Implementation of a different enable
there is a motion.in-position which you might want to use. That pin is true while the machine is not moving. Regards, Alex - Original Message - From: "Jack Ensor" <[EMAIL PROTECTED]> To: "Emc" Sent: Monday, March 05, 2007 10:24 PM Subject: [Emc-users] Hal Implementation of a different enable > The implementation of the enable in the stepper example, causes it > to come on > when the machine is turned on. I need an enable only while a > position is being > commanded and then subsequently removed. > > My stepper motor driver which uses a quadrature input, needs a > special enable > signal. The driver itself implements a holding current when the > quadrature > input stops changing. This is triggered about 5 seconds after the > enable is > removed. > > So the question is how can this type of enable be generated by hal. > (Starts with > motion command and ends subsequently). > > Jack Ensor > > > > - > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to > share your > opinions on IT & business topics through brief surveys-and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.446 / Virus Database: 268.18.7/710 - Release Date: > 4.3.2007 13:58 > > - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Lap Top IBM R51 with EMC2
Hello KOCABAS wrote For my milling machine I am using Toshiba Laptop with parelel port. It's Okey For my lathe machine I tried to use second Laptop IBM R51 with parelel port but I couldn't do it. Signals doesn't go to driver box. What I have to do ? Thanks - TV dinner still cooling? Check out "Tonight's Picks" on Yahoo! TV.- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Lap Top IBM R51 with EMC2
Parallel port no longer works in EMC 2.0.1 or later (emc starts but motors don't turn) Some users have reported that in EMC 2.0.1, EMC appears to start, but no signals ever appear on the parallel port (the motors don't turn). To fix this problem, upgrade to EMC 2.0.3 or newer. Then, add the command loadrt probe_parport before the line loading hal_parport in your hal file. In EMC 2.0.1, the Linux parallel port driver must be completely disabled for EMC's hal_parport driver to load. However, as we learned after the release of 2.0.1, this disabled certain parallel ports that are "PNP" (plug and play) devices. The new probe_parport realtime module performs the probing for one type of PNP port. If probe_parport doesn't allow your card to work, please contact the EMC developers. http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?TroubleShooting#Parallel_port_no_longer_works_in_EMC_2_0_1_or_later_emc_starts_but_motors_don_t_turn - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Lap Top IBM R51 with EMC2
Have you checked the port address? My R51 did not use 0x378 by default. Be interesting to see how you get on then. I had problems with Mach3 on R51 as the power control features under Windows were much too clever. EMC2 might go well as it is a nice laptop. John Prentice Hello KOCABAS wrote For my milling machine I am using Toshiba Laptop with parelel port. It's Okey For my lathe machine I tried to use second Laptop IBM R51 with parelel port but I couldn't do it. Signals doesn't go to driver box. What I have to do ? Thanks - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
