Re: [Emc-users] Muti Backplot?
As far as I know not directly. However, you can open more than one instance of AXIS.. (this is probably a bit hackish, and might cause tiny problems with operations - small lags & the like). (look at the emc runscript how it invokes axis, and do the same from another terminal. IIRC you need to be in the config dir, and run /path/to/axis -ini ./inifile.ini). Regards, Alex - Original Message - From: "Kirk Wallace" <[EMAIL PROTECTED]> To: "Enhanced Machine Controller (EMC)" Sent: Saturday, July 05, 2008 6:01 AM Subject: [Emc-users] Muti Backplot? > Is it possible to have different views of backplot running in AXIS? > > -- > Kirk Wallace (California, USA > http://www.wallacecompany.com/machine_shop/ > Hardinge HNC/EMC CNC lathe, > Bridgeport mill conversion, doing XY now, > Zubal lathe conversion pending > Craftsman AA 109 restoration > Shizuoka ST-N/EMC CNC) > > > - > Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! > Studies have shown that voting for your favorite open source project, > along with a healthy diet, reduces your potential for chronic lameness > and boredom. Vote Now at http://www.sourceforge.net/community/cca08 > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users No virus found in this incoming message. Checked by AVG. Version: 8.0.134 / Virus Database: 270.4.5/1535 - Release Date: 04.07.2008 17:03 - Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Muti Backplot?
Alex Joni wrote: >As far as I know not directly. >However, you can open more than one instance of AXIS.. (this is probably a >bit hackish, and might cause tiny problems with operations - small lags & >the like). >(look at the emc runscript how it invokes axis, and do the same from another >terminal. IIRC you need to be in the config dir, and run /path/to/axis -ini >./inifile.ini). > > You also need to set an environment variable called AXIS_NO_HAL, or AXIS won't start because there's already a component called axisui: export AXIS_NO_HAL=1 axis -ini /path/to/inifile - Steve - Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Thanks and help with post processor
Hi All This is a thank you to everyone out there who has helped over the last few months to get my little stepper powered router going. I am finally getting some useful stuff done now, and I can do pretty much everything within LinuxBrilliant. I have however acquired some rather good windows software, but its long list of post processors does not include EMC (shame). Is there a generic/popular alternative that will work? Thanks again Aaron -- Powered by Outblaze - Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Thanks and help with post processor
I am using CamBam and it's output seems to work fine with EMC2. Andy aaron Moore wrote: > Hi All > > This is a thank you to everyone out there who has helped over the last few > months to get my little stepper powered router going. I > am finally getting some useful stuff done now, and I can do pretty much > everything within LinuxBrilliant. > > I have however acquired some rather good windows software, but its long list > of post processors does not include EMC (shame). Is > there a generic/popular alternative that will work? > > Thanks again > > Aaron > > > -- Andy PGP Key ID: 0xDC1B5864 - Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Thanks and help with post processor
>> I have however acquired some rather good windows software, but its long list >> of post processors does not include EMC (shame). Is >> there a generic/popular alternative that will work? fanuc and/or mazak post processors seem to work ok for me, some of them require a bit of tweaking... AW - Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Lead screw comp
Gentlemen, Wish list addition. It would be nice to have a gui function to help collect the comp data. It would allow me to moe the axis to the first column position and then move to the corrected position and hit a button to store the second and third column positions. :) Thanks Stuart - Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
