Re: [Emc-users] Pin files for 5i25

[andy pugh]

On Tue, 27 Aug 2019 at 20:19, Marius Liebenberg 
wrote:

>
> Hopefully last question. There is a load  of files there and the names
> makes no logical sense to me. What file should I be looking at please?


pin files have names that either contain the name of the daughter board
they match (7i76 etc) or the BoB (G540 etc) or the functions included, and
the number thereof, where sv = servo (pwm + encoder) st = stepper, rm =
resolver (7i49)

-- 
atp
"A motorcycle is a bicycle with a pandemonium attachment and is designed
for the especial use of mechanical geniuses, daredevils and lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1916

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] Pin files for 5i25

[Peter C. Wallace]

On Tue, 27 Aug 2019, Marius Liebenberg wrote:


Date: Tue, 27 Aug 2019 21:17:19 +0200
From: Marius Liebenberg 
Reply-To: "Enhanced Machine Controller (EMC)"

To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Pin files for 5i25


On 8/27/2019 8:48 PM, Marius Liebenberg wrote:





On 8/27/2019 1:36 PM, Marius Liebenberg wrote:

Hi all

I need to set a 5i25 up as a dual lpt port. I want to replace my 
mill installation with Path Pilot and I need the pin and bit files 
to do that.



Does anyone know where I can go look for the files please?



http://freeby.mesanet.com/software/parallel/5i25.zip



Thanks all. Peter to the rescue. Thanks Peter.
- 
Hopefully last question. There is a load  of files there and the names 
makes no logical sense to me. What file should I be looking at please?


Regards / Groete
Marius D. Liebenberg
082 698 3251



The files (in configs/hostmot2) that end in .pin are text pinout files
The names match the breakout used (7I77, G540, C11 etc)

The corresponding files that end in .bit are the matching firmware files




___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users



Peter Wallace
Mesa Electronics

(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] Pin files for 5i25

[Marius Liebenberg]

On 8/27/2019 8:48 PM, Marius Liebenberg wrote:





On 8/27/2019 1:36 PM, Marius Liebenberg wrote:

Hi all

I need to set a 5i25 up as a dual lpt port. I want to replace my 
mill installation with Path Pilot and I need the pin and bit files 
to do that.



Does anyone know where I can go look for the files please?



http://freeby.mesanet.com/software/parallel/5i25.zip



Thanks all. Peter to the rescue. Thanks Peter.
- 
Hopefully last question. There is a load  of files there and the names 
makes no logical sense to me. What file should I be looking at please?


Regards / Groete
Marius D. Liebenberg
082 698 3251



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] Pin files for 5i25

[Marius Liebenberg]

On 8/27/2019 1:36 PM, Marius Liebenberg wrote:

Hi all

I need to set a 5i25 up as a dual lpt port. I want to replace my 
mill installation with Path Pilot and I need the pin and bit files 
to do that.



Does anyone know where I can go look for the files please?



http://freeby.mesanet.com/software/parallel/5i25.zip



Thanks all. Peter to the rescue. Thanks Peter.


Regards / Groete
Marius D. Liebenberg
082 698 3251



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] Pin files for 5i25

[Peter C. Wallace]

On Tue, 27 Aug 2019, Marius Liebenberg wrote:


Date: Tue, 27 Aug 2019 20:25:53 +0200
From: Marius Liebenberg 
Reply-To: "Enhanced Machine Controller (EMC)"

To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Pin files for 5i25


On 8/27/2019 1:36 PM, Marius Liebenberg wrote:

Hi all

I need to set a 5i25 up as a dual lpt port. I want to replace my mill 
installation with Path Pilot and I need the pin and bit files to do that.



Does anyone know where I can go look for the files please?



http://freeby.mesanet.com/software/parallel/5i25.zip




--

Regards / Groete
Marius D. Liebenberg
082 698 3251



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users



Peter Wallace
Mesa Electronics

(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] changing psu in a dell dimension.

[Gene Heskett]

On Tuesday 27 August 2019 11:18:24 Gene Heskett wrote:

> On Monday 26 August 2019 19:36:50 Gregg Eshelman via Emc-users wrote:
> > On optical disc drive where the tray won;t open I first get the tray
> > open with the emergency eject hole, then use a big pair of bent tip
> > tweezers to get the tray belt out. Next step, bring some water to a
> > rolling boil on the stove, drop the belt in and turn the heat off.
> > After a minute, fish the belt out, dry it off and use the tweezers
> > to reinstall. Also works on tray load game consoles like the "fat"
> > Playstation 2, original XBox, and Xbox 360.
> >
> > I always preferred optical drives with an all gear driven tray, but
> > those were few and far between.
> >
> > On Monday, August 26, 2019, 2:24:48 PM MDT, Gene Heskett
>
>  wrote:
> > > How often do you use a DVD anymore, especially if the computer is
> > > on a tall shelf?  You might just remove the drive.
> >
> > Thats also a possibility, since new installs can often be done with
> > a netinstall on a thumb drive.  IIRC, that dvd had to have 1/4"
> > snipped out of its tray belt & superglued shorter the last time I
> > used it, swag at about 2 years ago now.  That has been a good fix
> > I've done 4 or 5 times now.
> >
> > We'll see what another new & diff supply with enough drive cables
> > does tomorrow.
>
> Didn't work, fans run, power led remains orange with 3rd supply.  So I
> guess I put its SSD and 5i25 in another smaller dell and see if its
> got enough iron to run the g0704. Otherwise I'll have to go shopping I
> guess.
>
> Cheers, Gene Heskett

Anyone have spare lp back plates for a 5i25 I could use 2 of them.

Thanks.

Cheers, Gene Heskett
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page 


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] Pin files for 5i25

[Marius Liebenberg]

On 8/27/2019 1:36 PM, Marius Liebenberg wrote:

Hi all

I need to set a 5i25 up as a dual lpt port. I want to replace my mill 
installation with Path Pilot and I need the pin and bit files to do that.



Does anyone know where I can go look for the files please?


--

Regards / Groete
Marius D. Liebenberg
082 698 3251



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] changing psu in a dell dimension.

[Gene Heskett]

On Monday 26 August 2019 19:36:50 Gregg Eshelman via Emc-users wrote:

> On optical disc drive where the tray won;t open I first get the tray
> open with the emergency eject hole, then use a big pair of bent tip
> tweezers to get the tray belt out. Next step, bring some water to a
> rolling boil on the stove, drop the belt in and turn the heat off.
> After a minute, fish the belt out, dry it off and use the tweezers to
> reinstall. Also works on tray load game consoles like the "fat"
> Playstation 2, original XBox, and Xbox 360.
>
> I always preferred optical drives with an all gear driven tray, but
> those were few and far between.
>
> On Monday, August 26, 2019, 2:24:48 PM MDT, Gene Heskett 
 wrote:
> > How often do you use a DVD anymore, especially if the computer is on
> > a tall shelf?  You might just remove the drive.
>
> Thats also a possibility, since new installs can often be done with a
> netinstall on a thumb drive.  IIRC, that dvd had to have 1/4" snipped
> out of its tray belt & superglued shorter the last time I used it,
> swag at about 2 years ago now.  That has been a good fix I've done 4
> or 5 times now.
>
> We'll see what another new & diff supply with enough drive cables does
> tomorrow.

Didn't work, fans run, power led remains orange with 3rd supply.  So I 
guess I put its SSD and 5i25 in another smaller dell and see if its got 
enough iron to run the g0704. Otherwise I'll have to go shopping I 
guess.
 
Cheers, Gene Heskett
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page 


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] Pin files for 5i25

[Peter C. Wallace]

On Tue, 27 Aug 2019, Marius Liebenberg wrote:


Date: Tue, 27 Aug 2019 13:36:35 +0200
From: Marius Liebenberg 
Reply-To: "Enhanced Machine Controller (EMC)"

To: "Enhanced Machine Controller (EMC)" 
Subject: [Emc-users] Pin files for 5i25

Hi all

I need to set a 5i25 up as a dual lpt port. I want to replace my mill 
installation with Path Pilot and I need the pin and bit files to do that.


--


What breakout board are you using? (the configuration must match your brekaout 
board)




Regards / Groete
Marius D. Liebenberg
082 698 3251


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users



Peter Wallace
Mesa Electronics

(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

[Emc-users] Pin files for 5i25

[Marius Liebenberg]

Hi all

I need to set a 5i25 up as a dual lpt port. I want to replace my mill 
installation with Path Pilot and I need the pin and bit files to do that.


--

Regards / Groete
Marius D. Liebenberg
082 698 3251


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users