Re: [Emc-users] An actual application for non-circular boring..
On Thu, 20 Apr 2023 at 02:21, Sam Sokolik wrote: > > https://photos.app.goo.gl/uqdkdMuDpp8oACy3A That's really nice, though I think it might have worked just as well with the bottom open and a circular bore? -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] An actual application for non-circular boring..
Sure - Maybe if it was made out of steel - the area is so tight that there isn't much room around the ball nut. The green machine that I am using to cut this has just what you say. (obviously a lot more room) https://electronicsam.com/images/greenmachine/20180903_154610.jpg But what fun would that be? ;) This is a nice press fit. it turned out better than I thought it would. Now I just can't screw up the rest of the machining... :) sam On Thu, Apr 20, 2023 at 2:58 AM andy pugh wrote: > On Thu, 20 Apr 2023 at 02:21, Sam Sokolik wrote: > > > > > https://photos.app.goo.gl/uqdkdMuDpp8oACy3A > > > That's really nice, though I think it might have worked just as well with > the bottom open and a circular bore? > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is designed > for the especial use of mechanical geniuses, daredevils and lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] An actual application for non-circular boring..
So it was bored on the lathe using your spindle tracked motion? > -Original Message- > From: Sam Sokolik [mailto:samco...@gmail.com] > Sent: April-20-23 5:03 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] An actual application for non-circular boring.. > > Sure - Maybe if it was made out of steel - the area is so tight that there > isn't much room around the ball nut. > > The green machine that I am using to cut this has just what you say. > (obviously a lot more room) > > https://electronicsam.com/images/greenmachine/20180903_154610.jpg > > But what fun would that be? ;) > > This is a nice press fit. it turned out better than I thought it would. > Now I just can't screw up the rest of the machining... :) > > sam > > On Thu, Apr 20, 2023 at 2:58?AM andy pugh wrote: > > > On Thu, 20 Apr 2023 at 02:21, Sam Sokolik wrote: > > > > > > > > https://photos.app.goo.gl/uqdkdMuDpp8oACy3A > > > > > > That's really nice, though I think it might have worked just as well with > > the bottom open and a circular bore? > > > > -- > > atp > > "A motorcycle is a bicycle with a pandemonium attachment and is designed > > for the especial use of mechanical geniuses, daredevils and lunatics." > > � George Fitch, Atlanta Constitution Newspaper, 1912 > > > > ___ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] An actual application for non-circular boring..
I did it on the mill.. (this was testing) https://www.youtube.com/shorts/23bEsKMNJH0 On Thu, Apr 20, 2023 at 11:08 AM John Dammeyer wrote: > So it was bored on the lathe using your spindle tracked motion? > > > -Original Message- > > From: Sam Sokolik [mailto:samco...@gmail.com] > > Sent: April-20-23 5:03 AM > > To: Enhanced Machine Controller (EMC) > > Subject: Re: [Emc-users] An actual application for non-circular boring.. > > > > Sure - Maybe if it was made out of steel - the area is so tight that > there > > isn't much room around the ball nut. > > > > The green machine that I am using to cut this has just what you say. > > (obviously a lot more room) > > > > https://electronicsam.com/images/greenmachine/20180903_154610.jpg > > > > But what fun would that be? ;) > > > > This is a nice press fit. it turned out better than I thought it would. > > Now I just can't screw up the rest of the machining... :) > > > > sam > > > > On Thu, Apr 20, 2023 at 2:58?AM andy pugh wrote: > > > > > On Thu, 20 Apr 2023 at 02:21, Sam Sokolik wrote: > > > > > > > > > > > https://photos.app.goo.gl/uqdkdMuDpp8oACy3A > > > > > > > > > That's really nice, though I think it might have worked just as well > with > > > the bottom open and a circular bore? > > > > > > -- > > > atp > > > "A motorcycle is a bicycle with a pandemonium attachment and is > designed > > > for the especial use of mechanical geniuses, daredevils and lunatics." > > > � George Fitch, Atlanta Constitution Newspaper, 1912 > > > > > > ___ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > ___ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] An actual application for non-circular boring..
Nice square edges on the flat. https://photos.app.goo.gl/isaJ3CqR1kLjqoPK6 Or did you use the shaper approach and cut the corners that way? John > -Original Message- > From: Sam Sokolik [mailto:samco...@gmail.com] > Sent: April-20-23 9:28 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] An actual application for non-circular boring.. > > I did it on the mill.. > > (this was testing) > https://www.youtube.com/shorts/23bEsKMNJH0 > > On Thu, Apr 20, 2023 at 11:08?AM John Dammeyer > wrote: > > > So it was bored on the lathe using your spindle tracked motion? > > > > > -Original Message- > > > From: Sam Sokolik [mailto:samco...@gmail.com] > > > Sent: April-20-23 5:03 AM > > > To: Enhanced Machine Controller (EMC) > > > Subject: Re: [Emc-users] An actual application for non-circular boring.. > > > > > > Sure - Maybe if it was made out of steel - the area is so tight that > > there > > > isn't much room around the ball nut. > > > > > > The green machine that I am using to cut this has just what you say. > > > (obviously a lot more room) > > > > > > https://electronicsam.com/images/greenmachine/20180903_154610.jpg > > > > > > But what fun would that be? ;) > > > > > > This is a nice press fit. it turned out better than I thought it would. > > > Now I just can't screw up the rest of the machining... :) > > > > > > sam > > > > > > On Thu, Apr 20, 2023 at 2:58?AM andy pugh wrote: > > > > > > > On Thu, 20 Apr 2023 at 02:21, Sam Sokolik wrote: > > > > > > > > > > > > > > https://photos.app.goo.gl/uqdkdMuDpp8oACy3A > > > > > > > > > > > > That's really nice, though I think it might have worked just as well > > with > > > > the bottom open and a circular bore? > > > > > > > > -- > > > > atp > > > > "A motorcycle is a bicycle with a pandemonium attachment and is > > designed > > > > for the especial use of mechanical geniuses, daredevils and lunatics." > > > > ? George Fitch, Atlanta Constitution Newspaper, 1912 > > > > > > > > ___ > > > > Emc-users mailing list > > > > Emc-users@lists.sourceforge.net > > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > > > ___ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > ___ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] An actual application for non-circular boring..
the corners are what the boring produced. sam On Thu, Apr 20, 2023 at 12:18 PM John Dammeyer wrote: > Nice square edges on the flat. > https://photos.app.goo.gl/isaJ3CqR1kLjqoPK6 > > Or did you use the shaper approach and cut the corners that way? > John > > > -Original Message- > > From: Sam Sokolik [mailto:samco...@gmail.com] > > Sent: April-20-23 9:28 AM > > To: Enhanced Machine Controller (EMC) > > Subject: Re: [Emc-users] An actual application for non-circular boring.. > > > > I did it on the mill.. > > > > (this was testing) > > https://www.youtube.com/shorts/23bEsKMNJH0 > > > > On Thu, Apr 20, 2023 at 11:08?AM John Dammeyer > > wrote: > > > > > So it was bored on the lathe using your spindle tracked motion? > > > > > > > -Original Message- > > > > From: Sam Sokolik [mailto:samco...@gmail.com] > > > > Sent: April-20-23 5:03 AM > > > > To: Enhanced Machine Controller (EMC) > > > > Subject: Re: [Emc-users] An actual application for non-circular > boring.. > > > > > > > > Sure - Maybe if it was made out of steel - the area is so tight that > > > there > > > > isn't much room around the ball nut. > > > > > > > > The green machine that I am using to cut this has just what you say. > > > > (obviously a lot more room) > > > > > > > > https://electronicsam.com/images/greenmachine/20180903_154610.jpg > > > > > > > > But what fun would that be? ;) > > > > > > > > This is a nice press fit. it turned out better than I thought it > would. > > > > Now I just can't screw up the rest of the machining... :) > > > > > > > > sam > > > > > > > > On Thu, Apr 20, 2023 at 2:58?AM andy pugh > wrote: > > > > > > > > > On Thu, 20 Apr 2023 at 02:21, Sam Sokolik > wrote: > > > > > > > > > > > > > > > > > https://photos.app.goo.gl/uqdkdMuDpp8oACy3A > > > > > > > > > > > > > > > That's really nice, though I think it might have worked just as > well > > > with > > > > > the bottom open and a circular bore? > > > > > > > > > > -- > > > > > atp > > > > > "A motorcycle is a bicycle with a pandemonium attachment and is > > > designed > > > > > for the especial use of mechanical geniuses, daredevils and > lunatics." > > > > > ? George Fitch, Atlanta Constitution Newspaper, 1912 > > > > > > > > > > ___ > > > > > Emc-users mailing list > > > > > Emc-users@lists.sourceforge.net > > > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > > > > > > ___ > > > > Emc-users mailing list > > > > Emc-users@lists.sourceforge.net > > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > > > > > ___ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > ___ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] An actual application for non-circular boring..
Amazing!Sent from my Samsung S10 Original message From: Sam Sokolik Date: 2023-04-20 10:25 a.m. (GMT-08:00) To: "Enhanced Machine Controller (EMC)" Subject: Re: [Emc-users] An actual application for non-circular boring.. the corners are what the boring produced.samOn Thu, Apr 20, 2023 at 12:18 PM John Dammeyer wrote:> Nice square edges on the flat.> https://photos.app.goo.gl/isaJ3CqR1kLjqoPK6>> Or did you use the shaper approach and cut the corners that way?> John>> > -Original Message-> > From: Sam Sokolik [mailto:samco...@gmail.com]> > Sent: April-20-23 9:28 AM> > To: Enhanced Machine Controller (EMC)> > Subject: Re: [Emc-users] An actual application for non-circular boring..> >> > I did it on the mill..> >> > (this was testing)> > https://www.youtube.com/shorts/23bEsKMNJH0> >> > On Thu, Apr 20, 2023 at 11:08?AM John Dammeyer > > wrote:> >> > > So it was bored on the lathe using your spindle tracked motion?> > >> > > > -Original Message-> > > > From: Sam Sokolik [mailto:samco...@gmail.com]> > > > Sent: April-20-23 5:03 AM> > > > To: Enhanced Machine Controller (EMC)> > > > Subject: Re: [Emc-users] An actual application for non-circular> boring..> > > >> > > > Sure - Maybe if it was made out of steel - the area is so tight that> > > there> > > > isn't much room around the ball nut.> > > >> > > > The green machine that I am using to cut this has just what you say.> > > > (obviously a lot more room)> > > >> > > > https://electronicsam.com/images/greenmachine/20180903_154610.jpg> > > >> > > > But what fun would that be? ;)> > > >> > > > This is a nice press fit. it turned out better than I thought it> would.> > > > Now I just can't screw up the rest of the machining... :)> > > >> > > > sam> > > >> > > > On Thu, Apr 20, 2023 at 2:58?AM andy pugh > wrote:> > > >> > > > > On Thu, 20 Apr 2023 at 02:21, Sam Sokolik > wrote:> > > > >> > > > > >> > > > > > https://photos.app.goo.gl/uqdkdMuDpp8oACy3A> > > > >> > > > >> > > > > That's really nice, though I think it might have worked just as> well> > > with> > > > > the bottom open and a circular bore?> > > > >> > > > > --> > > > > atp> > > > > "A motorcycle is a bicycle with a pandemonium attachment and is> > > designed> > > > > for the especial use of mechanical geniuses, daredevils and> lunatics."> > > > > ? George Fitch, Atlanta Constitution Newspaper, 1912> > > > >> > > > > ___> > > > > Emc-users mailing list> > > > > Emc-users@lists.sourceforge.net> > > > > https://lists.sourceforge.net/lists/listinfo/emc-users> > > > >> > > >> > > > ___> > > > Emc-users mailing list> > > > Emc-users@lists.sourceforge.net> > > > https://lists.sourceforge.net/lists/listinfo/emc-users> > >> > >> > >> > > ___> > > Emc-users mailing list> > > Emc-users@lists.sourceforge.net> > > https://lists.sourceforge.net/lists/listinfo/emc-users> > >> >> > ___> > Emc-users mailing list> > Emc-users@lists.sourceforge.net> > https://lists.sourceforge.net/lists/listinfo/emc-users ___> Emc-users mailing list> Emc-users@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/emc-users>___Emc-users mailing listEmc-users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/emc-users ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Mill ramp angle
fre 2023-04-14 klockan 06:34 -0500 skrev Stuart Stevenson: > I use 3 degrees when I ramp even when spiral plunging. Tried 5 degrees and now it works well. > > On Fri, Apr 14, 2023 at 6:12 AM andy pugh wrote: > > > On Fri, 14 Apr 2023 at 10:29, Nicklas SB Karlsson > > wrote: > > > > > > > > Anyone have any suggestion about this? Decrease ramp angle? > > > > > > > Can you spiral down, making a hole slightly less than twice the > > tool > > diameter, so that only one side of the tool is engaged? > > > > -- > > atp > > "A motorcycle is a bicycle with a pandemonium attachment and is > > designed > > for the especial use of mechanical geniuses, daredevils and > > lunatics." > > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > > ___ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users