IMHO that is caused, because of the read ahead of the interpreter, The
feed you get is not the actual one, it is the one the interpreter last got.
Norbert
Am 08.02.2014 21:30, schrieb Mark Tucker:
Can anyone confirm for me that there is something wrong with the
feedrate derived from:-
emc.stat.settings[1]
I thought this displayed the commanded feedrate but if you run a program
with varying feedrates in it,the display shows the highest feedrate in
the program and not the current commanded feed
Try adding different feedrates on to the ends of lines like in arcspiral.ngc
When using something like gscreen industrial and watch the F figure.
Is there another instruction that will display the commanded feed?
I am trying to display the commanded feed alongside the Current Vel
(which does work)
--
Managing the Performance of Cloud-Based Applications
Take advantage of what the Cloud has to offer - Avoid Common Pitfalls.
Read the Whitepaper.
http://pubads.g.doubleclick.net/gampad/clk?id=121051231iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Managing the Performance of Cloud-Based Applications
Take advantage of what the Cloud has to offer - Avoid Common Pitfalls.
Read the Whitepaper.
http://pubads.g.doubleclick.net/gampad/clk?id=121051231iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users