Re: [Emc-users] Machinekit LinuxCNC-on-BeagleBone Initial Release
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 6/14/2013 1:33 PM, Troy Jacobson wrote: > This looks fantastic! The image is downloading now, and I hope to > have some time this weekend to play with it. > > I dabbled with LinuxCNC a few years ago, and the 3D printing thing > is giving me an excuse to work with it again. I'd like to find > some ways to contribute. As someone who has a lot of years > experience with Linux and programming, there is probably something > I can do. Coding is good, but there's a lot of work to be done in tweaking the configuration (both LinuxCNC/HAL and the setup of the distribution in general), and documentation, HOWTOs, or general spreading awareness are all appreciated! > My target system will primarily be a 3D printer, and occasionally > it will be used to drill and mill PCBs. At this time, I'll > disconnect my RAMPS board from the Arduino and use that as the > interface. I know it's not an exact drop-in, but it should work to > get started. One thing I've been thinking of doing is a Beagle Bone to Ramps cape (tentatively named CapeR) that would let folks just swap out their Arduino for a BeagleBone. It would mostly just be the two appropriate connector sets with wires tying them together, and maybe a few protection or voltage conversion parts to deal with the lower voltages on the BeagleBone. Let me know how it goes! - -- Charles Steinkuehler char...@steinkuehler.net -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.11 (MingW32) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlG7cZoACgkQLywbqEHdNFw+VACgz6ZpDa+CE1mii7lTEOPQgvna rKgAnjJvBXOqSMvw0MHj8zXzjKIsSnj9 =pKyd -END PGP SIGNATURE- -- This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Machinekit LinuxCNC-on-BeagleBone Initial Release
This looks fantastic! The image is downloading now, and I hope to have some time this weekend to play with it. I dabbled with LinuxCNC a few years ago, and the 3D printing thing is giving me an excuse to work with it again. I'd like to find some ways to contribute. As someone who has a lot of years experience with Linux and programming, there is probably something I can do. My target system will primarily be a 3D printer, and occasionally it will be used to drill and mill PCBs. At this time, I'll disconnect my RAMPS board from the Arduino and use that as the interface. I know it's not an exact drop-in, but it should work to get started. Thanks for getting this set up. Troy On Fri, Jun 14, 2013 at 1:19 AM, Charles Steinkuehler < char...@steinkuehler.net> wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > On 6/11/2013 10:26 AM, Charles Steinkuehler wrote: > > I'm going to hold off posting outside the LinuxCNC community for a > > bit to get a bit better out-of-box experience. But I'm not going > > to wait too long, and I'm not really the guy you would assign to > > "user experience" tweaking (I'm more the hardware/device-driver > > guy). > > Ship it! > > Details: > http://bb-lcnc.blogspot.com/ > > Video: > http://youtu.be/AK_OYoNOBDQ > > Image file for the impatient: > > http://www.machinekit.net/deb/rootfs/wheezy/debian-7.0.0-machinekit-armhf-2013-06-14.tar.xz > > - -- > Charles Steinkuehler > char...@steinkuehler.net > -BEGIN PGP SIGNATURE- > Version: GnuPG v1.4.11 (MingW32) > Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ > > iEYEARECAAYFAlG6tfUACgkQLywbqEHdNFyWsACfaGPCZAJvMXNpsis98KVr3qZu > hwAAoNr5AmfsopotcppPxAlrSyBEw4aF > =GwXo > -END PGP SIGNATURE- > > > -- > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > -- This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Machinekit LinuxCNC-on-BeagleBone Initial Release
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 6/11/2013 10:26 AM, Charles Steinkuehler wrote: > I'm going to hold off posting outside the LinuxCNC community for a > bit to get a bit better out-of-box experience. But I'm not going > to wait too long, and I'm not really the guy you would assign to > "user experience" tweaking (I'm more the hardware/device-driver > guy). Ship it! Details: http://bb-lcnc.blogspot.com/ Video: http://youtu.be/AK_OYoNOBDQ Image file for the impatient: http://www.machinekit.net/deb/rootfs/wheezy/debian-7.0.0-machinekit-armhf-2013-06-14.tar.xz - -- Charles Steinkuehler char...@steinkuehler.net -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.11 (MingW32) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlG6tfUACgkQLywbqEHdNFyWsACfaGPCZAJvMXNpsis98KVr3qZu hwAAoNr5AmfsopotcppPxAlrSyBEw4aF =GwXo -END PGP SIGNATURE- -- This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users