[Emc-users] Siemens simodrive 611
Guys, Anyone have information on the above servo systems from siemens and integrating to Linuxcnc and reference material etc , at the moment i'm not sure these are analog or digital thanks Guys Dave -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Siemens simodrive 611
On 16 October 2014 16:01, David Armstrong cncbas...@gmail.com wrote: Anyone have information on the above servo systems from siemens and integrating to Linuxcnc JT has them on his Bridgeport. But I don't _think_ that machine runs LinuxCNC. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Siemens simodrive 611
The 611 only is analog and the 611D are digital . Do you have the complete code for that servo drive ? I do believe that with the Siemens product code you should be able to find the PDF documentation on the net . I used this servo system in the past years and it's quite similar to other servo system with reference +/-10Vdc analog input voltage . Wich kind of motors are connected ? 1FK6 or 1FK7. (this usually installed on machine tools . Regards Alex On Thu, Oct 16, 2014 at 5:07 PM, andy pugh bodge...@gmail.com wrote: On 16 October 2014 16:01, David Armstrong cncbas...@gmail.com wrote: Anyone have information on the above servo systems from siemens and integrating to Linuxcnc JT has them on his Bridgeport. But I don't _think_ that machine runs LinuxCNC. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Siemens simodrive 611
There were several different versions of the 611 drives. Most of them were velocity mode drives with analog inputs. I have some old ones (1992 vintage) on a lathe that runs LinuxCNC. They could be purchased with encoder or resolver feedback and a host of other options. Do you know how old they are? Do you have a manual for them? The 611 drives I have sit in a common rack and use a common DC bus power supply. The later drives were available as standalone units. Dave On 10/16/2014 11:07 AM, andy pugh wrote: On 16 October 2014 16:01, David Armstrong cncbas...@gmail.com wrote: Anyone have information on the above servo systems from siemens and integrating to Linuxcnc JT has them on his Bridgeport. But I don't _think_ that machine runs LinuxCNC. --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Siemens simodrive 611
The 611D's were also available with analog (+/- 10V) inputs. (many options) Dave On 10/16/2014 11:26 AM, alex chiosso wrote: The 611 only is analog and the 611D are digital . Do you have the complete code for that servo drive ? I do believe that with the Siemens product code you should be able to find the PDF documentation on the net . I used this servo system in the past years and it's quite similar to other servo system with reference +/-10Vdc analog input voltage . Wich kind of motors are connected ? 1FK6 or 1FK7. (this usually installed on machine tools . Regards Alex On Thu, Oct 16, 2014 at 5:07 PM, andy pugh bodge...@gmail.com wrote: On 16 October 2014 16:01, David Armstrong cncbas...@gmail.com wrote: Anyone have information on the above servo systems from siemens and integrating to Linuxcnc JT has them on his Bridgeport. But I don't _think_ that machine runs LinuxCNC. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Siemens simodrive 611
Yes Dave you are right . The D should mean (digital) the technology used on the control boards . Alex On Thu, Oct 16, 2014 at 5:36 PM, Dave Cole linuxcncro...@gmail.com wrote: The 611D's were also available with analog (+/- 10V) inputs. (many options) Dave On 10/16/2014 11:26 AM, alex chiosso wrote: The 611 only is analog and the 611D are digital . Do you have the complete code for that servo drive ? I do believe that with the Siemens product code you should be able to find the PDF documentation on the net . I used this servo system in the past years and it's quite similar to other servo system with reference +/-10Vdc analog input voltage . Wich kind of motors are connected ? 1FK6 or 1FK7. (this usually installed on machine tools . Regards Alex On Thu, Oct 16, 2014 at 5:07 PM, andy pugh bodge...@gmail.com wrote: On 16 October 2014 16:01, David Armstrong cncbas...@gmail.com wrote: Anyone have information on the above servo systems from siemens and integrating to Linuxcnc JT has them on his Bridgeport. But I don't _think_ that machine runs LinuxCNC. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Siemens simodrive 611
David this http://www.automation.siemens.com/doconweb/pdf/840c_1101_e/611a_iaa.pdf?p=1 is the user manual of Simodrive 611 analog. As I told you if you can get the Siemens product code you will find all the docs you need . :-) Alex On Thu, Oct 16, 2014 at 5:41 PM, alex chiosso achio...@gmail.com wrote: Yes Dave you are right . The D should mean (digital) the technology used on the control boards . Alex On Thu, Oct 16, 2014 at 5:36 PM, Dave Cole linuxcncro...@gmail.com wrote: The 611D's were also available with analog (+/- 10V) inputs. (many options) Dave On 10/16/2014 11:26 AM, alex chiosso wrote: The 611 only is analog and the 611D are digital . Do you have the complete code for that servo drive ? I do believe that with the Siemens product code you should be able to find the PDF documentation on the net . I used this servo system in the past years and it's quite similar to other servo system with reference +/-10Vdc analog input voltage . Wich kind of motors are connected ? 1FK6 or 1FK7. (this usually installed on machine tools . Regards Alex On Thu, Oct 16, 2014 at 5:07 PM, andy pugh bodge...@gmail.com wrote: On 16 October 2014 16:01, David Armstrong cncbas...@gmail.com wrote: Anyone have information on the above servo systems from siemens and integrating to Linuxcnc JT has them on his Bridgeport. But I don't _think_ that machine runs LinuxCNC. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Siemens simodrive 611
Thanks Andy , i'll contact J T and ask On 16 October 2014 16:07, andy pugh bodge...@gmail.com wrote: On 16 October 2014 16:01, David Armstrong cncbas...@gmail.com wrote: Anyone have information on the above servo systems from siemens and integrating to Linuxcnc JT has them on his Bridgeport. But I don't _think_ that machine runs LinuxCNC. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Siemens simodrive 611
I never did find really good info on the 611 drives. I have one on my BP 308 and if your using a RPC it better be a big one. The other thing I can recall from memory is both my Siemens drives use the same terminal number for the analog signal 56 or 58 I can't recall for sure. I think Robh sent me some manuals on them at one time. I'll see if I can find them. JT On 10/16/2014 10:01 AM, David Armstrong wrote: Guys, Anyone have information on the above servo systems from siemens and integrating to Linuxcnc and reference material etc , at the moment i'm not sure these are analog or digital thanks Guys Dave -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
