Greetings all;

The spindle controller in a 7x10-12-14 is quite a bit different from the 
one in my mill, so my question is:

Can it be controlled by essentially the same controller (in this case a 
PMDX-106) as has worked so well on the mill?

And if so, how hard is it in hal, to tie the encoder's output back into the 
speed logic in LinuxCNC?  In a manner that looks like a constant SFM 
control even.

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
My web page: <http://coyoteden.dyndns-free.com:85/gene>
I'll see you... on the dark side of the moon...
                -- Pink Floyd

------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing 
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to