[Emc-users] armhf packages for Debian Stretch?
Hello everyone, I'm trying to run LinuxCNC on BeagleBone Black which has Debian Stretch installed, but it seems that LinuxCNC repo doesn't have armhf package for Stretch. Is there any chance that I can build one myself? As I can run LinuxCNC smoothly on my x86 laptop which has Debian Stretch with PREEMPT-RT kernel and I do see armhf packages for Debian Jessie. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] armhf packages for Debian Stretch?
On 08/15/2017 11:43 AM, 王若溪 wrote: Hello everyone, I'm trying to run LinuxCNC on BeagleBone Black which has Debian Stretch installed, but it seems that LinuxCNC repo doesn't have armhf package for Stretch. Is there any chance that I can build one myself? As I can run LinuxCNC smoothly on my x86 laptop which has Debian Stretch with PREEMPT-RT kernel and I do see armhf packages for Debian Jessie. Yes, you can build LinuxCNC for Stretch on armhf. The only reason we don't provide these packages is we don't have a dedicated Stretch armhf build machine. Here are instructions on building the debs yourself. This assumes a native build, not a cross build, so running everything on the BeagleBone Black: http://linuxcnc.org/docs/devel/html/code/building-linuxcnc.html#_building_debian_packages -- Sebastian Kuzminsky -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] armhf packages for Debian Stretch?
Sebastian, I'm curious. Do you actually use physical machines to do the builds? I assumed everyone ran VMWare's vSphere and had a ton of virtual machines they were calling a "farm". On Tue, Aug 15, 2017 at 11:04 AM, Sebastian Kuzminsky wrote: . The only reason we don't provide these packages is we don't have a > dedicated Stretch armhf build machine. -- Chris Albertson Redondo Beach, California -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] armhf packages for Debian Stretch?
On 08/15/2017 12:11 PM, Chris Albertson wrote: Sebastian, I'm curious. Do you actually use physical machines to do the builds? I assumed everyone ran VMWare's vSphere and had a ton of virtual machines they were calling a "farm". The x86 and amd64 builds all happen on a bunch of VMs (running in KVM, not VMware, but same idea). I have not yet found a reasonably priced, reasonably well supported arm or arm64 server to run arm/arm64 virtual machines on, so all arm builds happen on real arm hardware, Hardkernel Odroid U3: http://www.hardkernel.com/main/products/prdt_info.php?g_code=g138745696275 It's kind of a pain If anyone can recommend a 8+ CPU, 8+ GB RAM arm64 server that runs Debian, i'd love to be educated here. The best i've found is the SoftIron Overdrive. -- Sebastian Kuzminsky -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] armhf packages for Debian Stretch?
So using KEMU for the arm64 builds is either not working or to slow? I'm interested because I'm setting up a virtual server farm too. but just in planning stages now On Tue, Aug 15, 2017 at 1:04 PM, Sebastian Kuzminsky wrote: > On 08/15/2017 12:11 PM, Chris Albertson wrote: > >> Sebastian, >> >> I'm curious. Do you actually use physical machines to do the builds? I >> assumed everyone ran VMWare's vSphere and had a ton of virtual machines >> they were calling a "farm". >> > > The x86 and amd64 builds all happen on a bunch of VMs (running in KVM, not > VMware, but same idea). > > I have not yet found a reasonably priced, reasonably well supported arm or > arm64 server to run arm/arm64 virtual machines on, so all arm builds happen > on real arm hardware, Hardkernel Odroid U3: > > http://www.hardkernel.com/main/products/prdt_info.php?g_code=g138745696275 > > It's kind of a pain If anyone can recommend a 8+ CPU, 8+ GB RAM arm64 > server that runs Debian, i'd love to be educated here. The best i've found > is the SoftIron Overdrive. > > > -- > Sebastian Kuzminsky > > > -- > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Chris Albertson Redondo Beach, California -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] armhf packages for Debian Stretch?
On 08/15/2017 04:09 PM, Chris Albertson wrote: So using KEMU for the arm64 builds is either not working or to slow? I'm interested because I'm setting up a virtual server farm too. but just in planning stages now I tried using qemu emulation, and it was way too slow. Running on a fast amd64 host, the emulated machine ran slower than a BeagleBone Black. Also, there is a bug in the qemu's emulation of Arm that makes some kinds of (emulated) memory barriers fail. IIRC Jeff Epler tested this out and saw that this qemu bug caused our test suite to fail. I'd be happy running non-emulated Arm VMs on an Arm (or Arm64) host, but have not found suitable hardware. -- Sebastian Kuzminsky -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] armhf packages for Debian Stretch?
> Yes, you can build LinuxCNC for Stretch on armhf. The only reason we > don't provide these packages is we don't have a dedicated Stretch armhf > build machine. > Here are instructions on building the debs yourself. This assumes a >native build, not a cross build, so running everything on the BeagleBone > Black: Thanks a lot. Is BBB's 512MB memory enough to build LinuxCNC? And I'm curious that why cross build is not used in dedicated build machine. Is building on arm64 architecture such as Jetson TX1 considered as cross build? I happen to have an idle Jetson TX1 with 4GB memory, don't know if useful. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] armhf packages for Debian Stretch?
On 08/15/2017 09:05 PM, 王若溪 wrote: Yes, you can build LinuxCNC for Stretch on armhf. The only reason we don't provide these packages is we don't have a dedicated Stretch armhf build machine. Here are instructions on building the debs yourself. This assumes a native build, not a cross build, so running everything on the BeagleBone Black: Thanks a lot. Is BBB's 512MB memory enough to build LinuxCNC? And I'm curious that why cross build is not used in dedicated build machine. I've built LinuxCNC on a BBB, but I might have had swap enabled, I don't remember. We don't cross-build because we want to run the test suite, and that requires executing the compiled binaries, which doesn't work in a cross-build environment. Is building on arm64 architecture such as Jetson TX1 considered as cross build? I happen to have an idle Jetson TX1 with 4GB memory, don't know if useful. Building for arm64 on arm64 is not a cross build. Building for non-arm64 on arm64 would be a cross build. I don't have any arm64 machines, so i've never tried building/testing LinuxCNC on one. -- Sebastian Kuzminsky -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] armhf packages for Debian Stretch?
On Tue, Aug 15, 2017 at 05:16:05PM -0600, Sebastian Kuzminsky wrote: > Also, there is a bug in the qemu's emulation of Arm that makes some kinds of > (emulated) memory barriers fail. IIRC Jeff Epler tested this out and saw > that this qemu bug caused our test suite to fail. The problem I encountered relates to using "qemu-*-static" to perform builds in a chroot. It doesn't affect using "qemu-*-system" to perform builds on a whole emulated system. And yes, it only affects running the testsuite, not building packages. Basically, "qemu-*-static" thinks in single processes, and emulated "atomic operations" are only properly emulated for threaded programs, not multiprocess programs which map the same data in multiple processes and then access them using an atomic memory model. Jeff -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] armhf packages for Debian Stretch?
Is building on arm64 architecture such as Jetson TX1 considered as cross > build? I happen to have an idle Jetson TX1 with 4GB memory, don't know if > useful. The big advantage of the TX1 is the powerful Nvidia GPU that can be used for all kinds of matrix operations. The GPU is why the little TX1 board sells for $400 and not for $40. Seems a waist to use one of these to host a compiler where the GPU is not needed. Just this week I tried moving some computation I was running from CPU to GPU and saw a 30X speed up. From hours to minute per cycle. Your TX1's GPU has 256 cores and each can do full 32-bit floating point math. Yes a BBB is slow but my Raspberry Pi 3 is impressively fast for what it is -- Chris Albertson Redondo Beach, California -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] armhf packages for Debian Stretch?
May be a Raspberry Pi could be used as a build machine for Stretch, armhf, as Raspbian based on Debian Stretch is just released. I've successfully built LinuxCNC on an RPi 3B running on Raspbian Stretch and run it on a BBB running on Debian Stretch. Interestingly, RPi has 64bit ARM CPU while Raspbian is armhf architecture. 2017-08-16 11:09 GMT+08:00 Sebastian Kuzminsky : > On 08/15/2017 09:05 PM, 王若溪 wrote: > >> Yes, you can build LinuxCNC for Stretch on armhf. The only reason we >>> don't provide these packages is we don't have a dedicated Stretch armhf >>> build machine. >>> >> >> Here are instructions on building the debs yourself. This assumes a >>> native build, not a cross build, so running everything on the BeagleBone >>> Black: >>> >> >> Thanks a lot. >> >> Is BBB's 512MB memory enough to build LinuxCNC? And I'm curious that why >> cross build is not used in dedicated build machine. >> > > I've built LinuxCNC on a BBB, but I might have had swap enabled, I don't > remember. > > We don't cross-build because we want to run the test suite, and that > requires executing the compiled binaries, which doesn't work in a > cross-build environment. > > > Is building on arm64 architecture such as Jetson TX1 considered as cross >> build? I happen to have an idle Jetson TX1 with 4GB memory, don't know if >> useful. >> > > Building for arm64 on arm64 is not a cross build. Building for non-arm64 > on arm64 would be a cross build. > > I don't have any arm64 machines, so i've never tried building/testing > LinuxCNC on one. > > > -- > Sebastian Kuzminsky > -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users