Re: [Emc-users] 2.5 with 5i20 /7i33/7i37 ???
The configurations included with the LinuxCNC, are there as examples of how to create your own configuration. For the most part they will not run machinery, unless they were created specifically for your machine. Such as some of the configurations supplied by machine manufactures who sell equipment that use this software. Many of the supplied configurations are simulations that could never run anything (without modification). LinuxCNC is by no means plug and play, and there is no way that it possibly ever could be. Because of its almost limitless array of configuration possibilities you are going to need to understand how your machine works to be able to set it up. Please help us help you. (I have not had a chance to look into what you posted on paistbin yet.) - Original Message - From: "a k" To: "Enhanced Machine Controller (EMC)" Sent: Sunday, July 13, 2014 2:27:13 PM Subject: Re: [Emc-users] 2.5 with 5i20 /7i33/7i37 ??? looks like that only i use system 5i20/7i33/7i37 with emc2---2.5.4 /// when start emc2---2.5.4 it give so many hardware options and question is did someone actually check each of them to see if they really working? On Sun, Jul 13, 2014 at 10:35 AM, a k wrote: > http://pastebin.com/bPz4BwpX > > > On Sun, Jul 13, 2014 at 10:29 AM, a k wrote: > >> hi >> is this work? >> >> http://pastebin.com/ytNtBcXf >> >> >> >> >> On Sun, Jul 13, 2014 at 6:33 AM, Dave Cole >> wrote: >> >>> Aram, >>> >>> Copy the text out the hal file that is being used in the 2.5.4 >>> configuration and paste it here.. so we can look at it. >>> >>> http://pastebin.com/ >>> >>> Also, I would also post your .ini file here also so we can look at it. >>> >>> http://pastebin.com/ >>> >>> Then copy the URL that pastebin will give you into a message back to the >>> list so we can look at your file contents. >>> >>> Dave >>> >>> >>> On 7/13/2014 2:47 AM, a k wrote: >>> > Hi >>> > are you asking for >>> > "hm2-servo.hal" >>> > copy-past whole file >>> > am i right? >>> > >>> > >>> > On Sat, Jul 12, 2014 at 9:37 PM, Chris Morley < >>> chrisinnana...@hotmail.com> >>> > wrote: >>> > >>> >> Post your Emc 2.5.4 Hal file. >>> >> >>> >> - Reply message - >>> >> From: "a k" >>> >> To: "Enhanced Machine Controller (EMC)" < >>> emc-users@lists.sourceforge.net> >>> >> Subject: [Emc-users] 2.5 with 5i20 /7i33/7i37 ??? >>> >> Date: Sat, Jul 12, 2014 9:04 PM >>> >> >>> >> >>> >> hi >>> >> i am interesting who use emc2 with system 5i20 /7i33/7i37 >>> >> just who actually used exact combination? >>> >> / >>> >> >>> >> >>> >> How to explain >>> >> /// >>> >> please!!! Attention here! >>> >> when i use emc2 -- - 2.2.4/2.2.5 >>> >> all LED lights on board 5i20 are ON >>> >> >>> >> and >>> >> when >>> >> i use emc2---2.5 >>> >> NONE of the LED light on 5i20 are ON >>> >> >>> >> does that show clear that problem in emc2-2.5! >>> >> to be clear: problem in emc2---2.5 for 5i20 >>> >> >>> >> // >>> >> >>> >> thanks >>> >> aram >>> >> >>> >> >>> -- >>> >> ___ >>> >> Emc-users mailing list >>> >> Emc-users@lists.sourceforge.net >>> >> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> >>> >> >>> -- >>> >> ___ >>> >> Emc-users mailing list >>> >> Emc-users@lists.sourceforge.net >>> >> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> >>> > >>> -- >>> > ___ >>> > Emc-users mailing list >>> > Emc-users@lists.sourceforge.net >>> > https://lists.sourceforge.net/lists/listinfo/emc-users >>> >>> >>> -- >>> ___ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> >> > -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] 2.5 with 5i20 /7i33/7i37 ???
looks like that only i use system 5i20/7i33/7i37 with emc2---2.5.4 /// when start emc2---2.5.4 it give so many hardware options and question is did someone actually check each of them to see if they really working? On Sun, Jul 13, 2014 at 10:35 AM, a k wrote: > http://pastebin.com/bPz4BwpX > > > On Sun, Jul 13, 2014 at 10:29 AM, a k wrote: > >> hi >> is this work? >> >> http://pastebin.com/ytNtBcXf >> >> >> >> >> On Sun, Jul 13, 2014 at 6:33 AM, Dave Cole >> wrote: >> >>> Aram, >>> >>> Copy the text out the hal file that is being used in the 2.5.4 >>> configuration and paste it here.. so we can look at it. >>> >>> http://pastebin.com/ >>> >>> Also, I would also post your .ini file here also so we can look at it. >>> >>> http://pastebin.com/ >>> >>> Then copy the URL that pastebin will give you into a message back to the >>> list so we can look at your file contents. >>> >>> Dave >>> >>> >>> On 7/13/2014 2:47 AM, a k wrote: >>> > Hi >>> > are you asking for >>> > "hm2-servo.hal" >>> > copy-past whole file >>> > am i right? >>> > >>> > >>> > On Sat, Jul 12, 2014 at 9:37 PM, Chris Morley < >>> chrisinnana...@hotmail.com> >>> > wrote: >>> > >>> >> Post your Emc 2.5.4 Hal file. >>> >> >>> >> - Reply message - >>> >> From: "a k" >>> >> To: "Enhanced Machine Controller (EMC)" < >>> emc-users@lists.sourceforge.net> >>> >> Subject: [Emc-users] 2.5 with 5i20 /7i33/7i37 ??? >>> >> Date: Sat, Jul 12, 2014 9:04 PM >>> >> >>> >> >>> >> hi >>> >> i am interesting who use emc2 with system 5i20 /7i33/7i37 >>> >> just who actually used exact combination? >>> >> / >>> >> >>> >> >>> >> How to explain >>> >> /// >>> >> please!!! Attention here! >>> >> when i use emc2 -- - 2.2.4/2.2.5 >>> >> all LED lights on board 5i20 are ON >>> >> >>> >> and >>> >> when >>> >> i use emc2---2.5 >>> >> NONE of the LED light on 5i20 are ON >>> >> >>> >> does that show clear that problem in emc2-2.5! >>> >> to be clear: problem in emc2---2.5 for 5i20 >>> >> >>> >> // >>> >> >>> >> thanks >>> >> aram >>> >> >>> >> >>> -- >>> >> ___ >>> >> Emc-users mailing list >>> >> Emc-users@lists.sourceforge.net >>> >> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> >>> >> >>> -- >>> >> ___ >>> >> Emc-users mailing list >>> >> Emc-users@lists.sourceforge.net >>> >> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> >>> > >>> -- >>> > ___ >>> > Emc-users mailing list >>> > Emc-users@lists.sourceforge.net >>> > https://lists.sourceforge.net/lists/listinfo/emc-users >>> >>> >>> -- >>> ___ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> >> > -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] 2.5 with 5i20 /7i33/7i37 ???
http://pastebin.com/bPz4BwpX On Sun, Jul 13, 2014 at 10:29 AM, a k wrote: > hi > is this work? > > http://pastebin.com/ytNtBcXf > > > > > On Sun, Jul 13, 2014 at 6:33 AM, Dave Cole > wrote: > >> Aram, >> >> Copy the text out the hal file that is being used in the 2.5.4 >> configuration and paste it here.. so we can look at it. >> >> http://pastebin.com/ >> >> Also, I would also post your .ini file here also so we can look at it. >> >> http://pastebin.com/ >> >> Then copy the URL that pastebin will give you into a message back to the >> list so we can look at your file contents. >> >> Dave >> >> >> On 7/13/2014 2:47 AM, a k wrote: >> > Hi >> > are you asking for >> > "hm2-servo.hal" >> > copy-past whole file >> > am i right? >> > >> > >> > On Sat, Jul 12, 2014 at 9:37 PM, Chris Morley < >> chrisinnana...@hotmail.com> >> > wrote: >> > >> >> Post your Emc 2.5.4 Hal file. >> >> >> >> - Reply message - >> >> From: "a k" >> >> To: "Enhanced Machine Controller (EMC)" < >> emc-users@lists.sourceforge.net> >> >> Subject: [Emc-users] 2.5 with 5i20 /7i33/7i37 ??? >> >> Date: Sat, Jul 12, 2014 9:04 PM >> >> >> >> >> >> hi >> >> i am interesting who use emc2 with system 5i20 /7i33/7i37 >> >> just who actually used exact combination? >> >> / >> >> >> >> >> >> How to explain >> >> /// >> >> please!!! Attention here! >> >> when i use emc2 -- - 2.2.4/2.2.5 >> >> all LED lights on board 5i20 are ON >> >> >> >> and >> >> when >> >> i use emc2---2.5 >> >> NONE of the LED light on 5i20 are ON >> >> >> >> does that show clear that problem in emc2-2.5! >> >> to be clear: problem in emc2---2.5 for 5i20 >> >> >> >> // >> >> >> >> thanks >> >> aram >> >> >> >> >> -- >> >> ___ >> >> Emc-users mailing list >> >> Emc-users@lists.sourceforge.net >> >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> >> >> >> -- >> >> ___ >> >> Emc-users mailing list >> >> Emc-users@lists.sourceforge.net >> >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> >> > >> -- >> > ___ >> > Emc-users mailing list >> > Emc-users@lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/emc-users >> >> >> -- >> ___ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] 2.5 with 5i20 /7i33/7i37 ???
hi is this work? http://pastebin.com/ytNtBcXf On Sun, Jul 13, 2014 at 6:33 AM, Dave Cole wrote: > Aram, > > Copy the text out the hal file that is being used in the 2.5.4 > configuration and paste it here.. so we can look at it. > > http://pastebin.com/ > > Also, I would also post your .ini file here also so we can look at it. > > http://pastebin.com/ > > Then copy the URL that pastebin will give you into a message back to the > list so we can look at your file contents. > > Dave > > > On 7/13/2014 2:47 AM, a k wrote: > > Hi > > are you asking for > > "hm2-servo.hal" > > copy-past whole file > > am i right? > > > > > > On Sat, Jul 12, 2014 at 9:37 PM, Chris Morley < > chrisinnana...@hotmail.com> > > wrote: > > > >> Post your Emc 2.5.4 Hal file. > >> > >> - Reply message - > >> From: "a k" > >> To: "Enhanced Machine Controller (EMC)" < > emc-users@lists.sourceforge.net> > >> Subject: [Emc-users] 2.5 with 5i20 /7i33/7i37 ??? > >> Date: Sat, Jul 12, 2014 9:04 PM > >> > >> > >> hi > >> i am interesting who use emc2 with system 5i20 /7i33/7i37 > >> just who actually used exact combination? > >> / > >> > >> > >> How to explain > >> /// > >> please!!! Attention here! > >> when i use emc2 -- - 2.2.4/2.2.5 > >> all LED lights on board 5i20 are ON > >> > >> and > >> when > >> i use emc2---2.5 > >> NONE of the LED light on 5i20 are ON > >> > >> does that show clear that problem in emc2-2.5! > >> to be clear: problem in emc2---2.5 for 5i20 > >> > >> // > >> > >> thanks > >> aram > >> > >> > -- > >> ___ > >> Emc-users mailing list > >> Emc-users@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/emc-users > >> > >> > -- > >> ___ > >> Emc-users mailing list > >> Emc-users@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/emc-users > >> > > > -- > > ___ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > -- > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] 2.5 with 5i20 /7i33/7i37 ???
Aram, Copy the text out the hal file that is being used in the 2.5.4 configuration and paste it here.. so we can look at it. http://pastebin.com/ Also, I would also post your .ini file here also so we can look at it. http://pastebin.com/ Then copy the URL that pastebin will give you into a message back to the list so we can look at your file contents. Dave On 7/13/2014 2:47 AM, a k wrote: > Hi > are you asking for > "hm2-servo.hal" > copy-past whole file > am i right? > > > On Sat, Jul 12, 2014 at 9:37 PM, Chris Morley > wrote: > >> Post your Emc 2.5.4 Hal file. >> >> - Reply message - >> From: "a k" >> To: "Enhanced Machine Controller (EMC)" >> Subject: [Emc-users] 2.5 with 5i20 /7i33/7i37 ??? >> Date: Sat, Jul 12, 2014 9:04 PM >> >> >> hi >> i am interesting who use emc2 with system 5i20 /7i33/7i37 >> just who actually used exact combination? >> / >> >> >> How to explain >> /// >> please!!! Attention here! >> when i use emc2 -- - 2.2.4/2.2.5 >> all LED lights on board 5i20 are ON >> >> and >> when >> i use emc2---2.5 >> NONE of the LED light on 5i20 are ON >> >> does that show clear that problem in emc2-2.5! >> to be clear: problem in emc2---2.5 for 5i20 >> >> // >> >> thanks >> aram >> >> -- >> ___ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> -- >> ___ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > -- > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] 2.5 with 5i20 /7i33/7i37 ???
Hi are you asking for "hm2-servo.hal" copy-past whole file am i right? On Sat, Jul 12, 2014 at 9:37 PM, Chris Morley wrote: > > Post your Emc 2.5.4 Hal file. > > - Reply message - > From: "a k" > To: "Enhanced Machine Controller (EMC)" > Subject: [Emc-users] 2.5 with 5i20 /7i33/7i37 ??? > Date: Sat, Jul 12, 2014 9:04 PM > > > hi > i am interesting who use emc2 with system 5i20 /7i33/7i37 > just who actually used exact combination? > / > > > How to explain > /// > please!!! Attention here! > when i use emc2 -- - 2.2.4/2.2.5 > all LED lights on board 5i20 are ON > > and > when > i use emc2---2.5 > NONE of the LED light on 5i20 are ON > > does that show clear that problem in emc2-2.5! > to be clear: problem in emc2---2.5 for 5i20 > > // > > thanks > aram > > -- > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > -- > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] 2.5 with 5i20 /7i33/7i37 ???
Post your Emc 2.5.4 Hal file. - Reply message - From: "a k" To: "Enhanced Machine Controller (EMC)" Subject: [Emc-users] 2.5 with 5i20 /7i33/7i37 ??? Date: Sat, Jul 12, 2014 9:04 PM hi i am interesting who use emc2 with system 5i20 /7i33/7i37 just who actually used exact combination? / How to explain /// please!!! Attention here! when i use emc2 -- - 2.2.4/2.2.5 all LED lights on board 5i20 are ON and when i use emc2---2.5 NONE of the LED light on 5i20 are ON does that show clear that problem in emc2-2.5! to be clear: problem in emc2---2.5 for 5i20 // thanks aram -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
