On 25.09.14 15:21, Bjørn Kristiansen wrote: > Hello. I have a Emcoturn 140 lathe. i am going to use linuxcnc for > retrofitting, and i will use the 5 ph stepper drives. but does anyone > know anything about step timing for these drives?
Hej Bjørn, If your stepper drives aren't here: http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Stepper_Drive_Timing then we'd need to know the manufacturer and model number of your drives in order to know whether we have used anything similar. Are your drives second-hand, so that you don't have any data? Erik -- Investment in infrastructure accounts for much of China's GDP - the country is said to have built the equivalent of Rome every two months in the past decade. And with such a large pool of labour, it is harder to put the brakes on when growth slows and supply outstrips demand. - http://www.bbc.com/news/magazine-19049254 ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
