Re: [Emc-users] Go back to 2.6.4
On 7/9/15 7:55 AM, Rick Lair wrote: I had a HDD take a crap on me late yesterday, I believe vibration related, and have already loaded up a new drive, but I want to be able to go back to the 2.6.4 release, would the following be appropriate to perform from the command line to make that happen, git branch 2.6.4 or maybe git checkout 2.6.4 git checkout v2.6.4 will make your working tree contain the exact source code that 2.6.4 was built from. -- Sebastian Kuzminsky -- Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Go back to 2.6.4
On 7/9/15 9:48 AM, Rick Lair wrote: I do want to and will update to 2.6.8, I just need to get it back running, of course it took a crap in the middle of a decent size job. I just remember Norbert saying there were some pin name changes, and I don't know what they are right now to get them addressed. Bummer. We try to not break running configs during stable releases, but i did not examine the gmoccapy commits closely enough to catch this. Looking now i see some pin renames: .feed-override-counts- .feed-override.counts .spindle-override-counts - .spindle-override.counts .jog-speed-counts- .jog-speed.counts .max-vel-counts - .max-velocity.counts There are also some new pins added, these are acceptable during a stable release because they don't break existing configs. Norbert, please do not change the HAL interface of any component during a stable release. If you absolutely have to, this change needs to be announced loudly. -- Sebastian Kuzminsky -- Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Go back to 2.6.4
On 9 July 2015 at 17:01, Sebastian Kuzminsky s...@highlab.com wrote: .feed-override-counts- .feed-override.counts .spindle-override-counts - .spindle-override.counts .jog-speed-counts- .jog-speed.counts .max-vel-counts - .max-velocity.counts It looks like there will be at most 4 HAL lines to change. That's likely to be less trouble than trying to get a specific version. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto -- Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Go back to 2.6.4
Thanks Seb, I do want to and will update to 2.6.8, I just need to get it back running, of course it took a crap in the middle of a decent size job. I just remember Norbert saying there were some pin name changes, and I don't know what they are right now to get them addressed. Rick On 7/9/2015 11:08 AM, Sebastian Kuzminsky wrote: On 7/9/15 7:55 AM, Rick Lair wrote: I had a HDD take a crap on me late yesterday, I believe vibration related, and have already loaded up a new drive, but I want to be able to go back to the 2.6.4 release, would the following be appropriate to perform from the command line to make that happen, git branch 2.6.4 or maybe git checkout 2.6.4 git checkout v2.6.4 will make your working tree contain the exact source code that 2.6.4 was built from. -- Thanks Rick Lair Superior Roll Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com -- Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Go back to 2.6.4
I was just reading over the changlog now, and see a few little things I need to investigate before updating to 2.6.8, all relating to Gmoccapy. Mainly in the 2.6.6 release is where I see the most activity regarding this. Rick On 7/9/2015 11:50 AM, sam sokolik wrote: I don't know of any real differences between 2.6.4 and 2.6.8 that should effect configs... sam On 7/9/2015 10:48 AM, Rick Lair wrote: Thanks Seb, I do want to and will update to 2.6.8, I just need to get it back running, of course it took a crap in the middle of a decent size job. I just remember Norbert saying there were some pin name changes, and I don't know what they are right now to get them addressed. Rick On 7/9/2015 11:08 AM, Sebastian Kuzminsky wrote: On 7/9/15 7:55 AM, Rick Lair wrote: I had a HDD take a crap on me late yesterday, I believe vibration related, and have already loaded up a new drive, but I want to be able to go back to the 2.6.4 release, would the following be appropriate to perform from the command line to make that happen, git branch 2.6.4 or maybe git checkout 2.6.4 git checkout v2.6.4 will make your working tree contain the exact source code that 2.6.4 was built from. -- Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Thanks Rick Lair Superior Roll Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com -- Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Go back to 2.6.4
Looks like it didn't matter, I'm not using those pins for anything anyway. I just wasn't sure if it was a large amount of things, and I was going to sit there for an hour hashing out what I needed to fix. Looks like I am just going to run the most current after all. Thanks Guys, Rick On 7/9/2015 12:11 PM, andy pugh wrote: On 9 July 2015 at 17:01, Sebastian Kuzminsky s...@highlab.com wrote: .feed-override-counts- .feed-override.counts .spindle-override-counts - .spindle-override.counts .jog-speed-counts- .jog-speed.counts .max-vel-counts - .max-velocity.counts It looks like there will be at most 4 HAL lines to change. That's likely to be less trouble than trying to get a specific version. -- Thanks Rick Lair Superior Roll Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com -- Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Go back to 2.6.4
I don't know of any real differences between 2.6.4 and 2.6.8 that should effect configs... sam On 7/9/2015 10:48 AM, Rick Lair wrote: Thanks Seb, I do want to and will update to 2.6.8, I just need to get it back running, of course it took a crap in the middle of a decent size job. I just remember Norbert saying there were some pin name changes, and I don't know what they are right now to get them addressed. Rick On 7/9/2015 11:08 AM, Sebastian Kuzminsky wrote: On 7/9/15 7:55 AM, Rick Lair wrote: I had a HDD take a crap on me late yesterday, I believe vibration related, and have already loaded up a new drive, but I want to be able to go back to the 2.6.4 release, would the following be appropriate to perform from the command line to make that happen, git branch 2.6.4 or maybe git checkout 2.6.4 git checkout v2.6.4 will make your working tree contain the exact source code that 2.6.4 was built from. -- Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users