Re: [Eric] segmentation fault with Eric4-4.3.8 on SUSE 11.1_x64
Hi, are you sure, that python-kde4 was compiled with the latest sip version? That could cause problems like the one you observed. Detlev On Donnerstag, 29. Oktober 2009, Arndt Meier wrote: Hi! Eric4 starts its IDE and all is well. I get a message eric4 has not been configured yet. The configuration dialog will be started. OK. Whether or not I press OK, after some 30 seconds eric4 just crashes with no error message in the bash shell other than segfault: eric4 Warning: translation file 'qt_en_GB'could not be loaded. Using default. Warning: translation file 'eric4_en_GB'could not be loaded. Using default. Warning: translation file 'qscintilla_en_GB'could not be loaded. Using default. Segmentation fault (core dumped) ls -lrt shows -rw--- 1 meiera users 91054080 2009-10-29 10:42 core.32758 And even stranger, gdb does not understand the core dump ~ gdb core.32758 /usr/local/bin/eric4 GNU gdb (GDB; openSUSE 11.1) 6.8.50.20081120-cvs Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type show copying and show warranty for details. This GDB was configured as x86_64-suse-linux. For bug reporting instructions, please see: http://bugs.opensuse.org/... /home/meiera/core.32758: not in executable format: File format not recognized /usr/local/bin/eric4 is not a core dump: File format not recognized (gdb) bt No stack. Starting a minimalistic eric: eric4 --nosplash --noopen --nokde and not doing/touching anything, again after some 30 seconds eric4 crashes and again there is a pseudo core dump -rw--- 1 meiera users 76963840 2009-10-29 11:10 core.402 that gdb again cannot read (as above). I am running: openSUSE 11.1_x64 Qt 4.5.2 QScintilla-gpl-2.4 PyQt-x11-gpl-4.6.1 sip-4.9.1 python 2.6.2 python-kde4 4.3.1-2.3 Any help in resolving this error is greatly appreciated. Art --- Dr Arndt Meier Remote Sensing Analyst Department of Environment, Climate Change and Water Level 5, 43 Bridge Street HURSTVILLE NSW 2220 phone: (02) 9585 6101 email: arndt.me...@environment.nsw.gov.au --- --- This email is intended for the addressee(s) named and may contain confidential and/or privileged information. If you are not the intended recipient, please notify the sender and then delete it immediately. Any views expressed in this email are those of the individual sender except where the sender expressly and with authority states them to be the views of the Department of Environment, Climate Change Water NSW. -- Detlev Offenbach det...@die-offenbachs.de ___ Eric mailing list Eric@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/eric
Re: [Eric] segmentation fault with Eric4-4.3.8 on SUSE 11.1_x64
On Thursday 29 October 2009, 01:23:06 Arndt Meier wrote: Hi! Eric4 starts its IDE and all is well. I get a message eric4 has not been configured yet. The configuration dialog will be started. OK. Whether or not I press OK, after some 30 seconds eric4 just crashes with no error message in the bash shell other than segfault: eric4 Warning: translation file 'qt_en_GB'could not be loaded. Using default. Warning: translation file 'eric4_en_GB'could not be loaded. Using default. Warning: translation file 'qscintilla_en_GB'could not be loaded. Using default. Segmentation fault (core dumped) ls -lrt shows -rw--- 1 meiera users 91054080 2009-10-29 10:42 core.32758 And even stranger, gdb does not understand the core dump ~ gdb core.32758 /usr/local/bin/eric4 GNU gdb (GDB; openSUSE 11.1) 6.8.50.20081120-cvs Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type show copying and show warranty for details. This GDB was configured as x86_64-suse-linux. For bug reporting instructions, please see: http://bugs.opensuse.org/... /home/meiera/core.32758: not in executable format: File format not recognized /usr/local/bin/eric4 is not a core dump: File format not recognized (gdb) bt No stack. Starting a minimalistic eric: eric4 --nosplash --noopen --nokde and not doing/touching anything, again after some 30 seconds eric4 crashes and again there is a pseudo core dump -rw--- 1 meiera users 76963840 2009-10-29 11:10 core.402 that gdb again cannot read (as above). I am running: openSUSE 11.1_x64 Qt 4.5.2 QScintilla-gpl-2.4 PyQt-x11-gpl-4.6.1 sip-4.9.1 python 2.6.2 python-kde4 4.3.1-2.3 You seem to compile stuff from tarballs (and might be using rpm --force | --nodeps for any of these or related ones, e.g. kdelibs4). That tends to produce unreproducible effects, and any of the advices below might be void. Better start with a full manual cleanup (remove everything from /usr/local apart from directories), and _reinstall_ the packages, that you installed manually, with yast2. Any help in resolving this error is greatly appreciated. Then you might try my packages from: http://download.opensuse.org/repositories/home:/frispete:/branches:/KDE:/KDE4:/Factory:/Desktop/ They contain full debugging infos, btw. In the openSUSE_11.1_KDE_Qt tree, I provide packages based on Qt 4.5.3 from http://download.opensuse.org/repositories/KDE:/Qt/openSUSE_11.1 while openSUSE_Factory is based on current KDE 4.3.1 from: http://download.opensuse.org/repositories/KDE:/KDE4:/Factory:/Desktop/openSUSE_11.1 This should allow you to rebuild your environment fully rpm based in any flavor you want. Further debugging is better done with these packages installed: gcc43-debuginfo-4.3.3_20081022-9.5 gcc43-debugsource-4.3.3_20081022-9.5 glibc-debuginfo-2.9-2.12.1 glibc-debugsource-2.9-2.12.1 kdelibs4-debuginfo-4.1.3-4.10.4 kdelibs4-debugsource-4.1.3-4.10.4 libqt4-debuginfo-4.5.3-70.1 libqt4-debugsource-4.5.3-70.1 python-base-debuginfo-2.6.0-2.22.1 python-base-debugsource-2.6.0-2.22.1 python-debuginfo-2.6.0-2.21.1 python-debugsource-2.6.0-2.21.1 python-qt4-debuginfo-4.6.1-53.1 python-qt4-debugsource-4.6.1-53.1 python-sip-debuginfo-4.9.1-54.1 python-sip-debugsource-4.9.1-54.1 available from: http://download.opensuse.org/debug/distribution/11.1/repo/oss/ and http://download.opensuse.org/debug/update/11.1/ Minors might differ.. All these URLs contain repo files, that is easiest fetched with the attached script. Make your choice of repos, and run zypper -v dup then. It might be necessary to force installation of the right eric with zypper -v in eric-4.3.8-40.5. Lookup the available minors with zypper -v se -s eric. Then run eric: gdb python -ex set args /usr/lib/python2.6/site-packages/eric4/eric4.py -ex run This should give you a usable backtrace (bt full). Hope, that gets you started ;-).. Pete wget_repo.sh Description: application/shellscript ___ Eric mailing list Eric@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/eric
[Eric] segmentation fault with Eric4-4.3.8 on SUSE 11.1_x64
Hi! Eric4 starts its IDE and all is well. I get a message eric4 has not been configured yet. The configuration dialog will be started. OK. Whether or not I press OK, after some 30 seconds eric4 just crashes with no error message in the bash shell other than segfault: eric4 Warning: translation file 'qt_en_GB'could not be loaded. Using default. Warning: translation file 'eric4_en_GB'could not be loaded. Using default. Warning: translation file 'qscintilla_en_GB'could not be loaded. Using default. Segmentation fault (core dumped) ls -lrt shows -rw--- 1 meiera users 91054080 2009-10-29 10:42 core.32758 And even stranger, gdb does not understand the core dump ~ gdb core.32758 /usr/local/bin/eric4 GNU gdb (GDB; openSUSE 11.1) 6.8.50.20081120-cvs Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type show copying and show warranty for details. This GDB was configured as x86_64-suse-linux. For bug reporting instructions, please see: http://bugs.opensuse.org/... /home/meiera/core.32758: not in executable format: File format not recognized /usr/local/bin/eric4 is not a core dump: File format not recognized (gdb) bt No stack. Starting a minimalistic eric: eric4 --nosplash --noopen --nokde and not doing/touching anything, again after some 30 seconds eric4 crashes and again there is a pseudo core dump -rw--- 1 meiera users 76963840 2009-10-29 11:10 core.402 that gdb again cannot read (as above). I am running: openSUSE 11.1_x64 Qt 4.5.2 QScintilla-gpl-2.4 PyQt-x11-gpl-4.6.1 sip-4.9.1 python 2.6.2 python-kde4 4.3.1-2.3 Any help in resolving this error is greatly appreciated. Art --- Dr Arndt Meier Remote Sensing Analyst Department of Environment, Climate Change and Water Level 5, 43 Bridge Street HURSTVILLE NSW 2220 phone: (02) 9585 6101 email: arndt.me...@environment.nsw.gov.au -- This email is intended for the addressee(s) named and may contain confidential and/or privileged information. If you are not the intended recipient, please notify the sender and then delete it immediately. Any views expressed in this email are those of the individual sender except where the sender expressly and with authority states them to be the views of the Department of Environment, Climate Change Water NSW. ___ Eric mailing list Eric@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/eric
