[Evolution] disconnected IMAP
Hi Folks. I've a couple of questions regarding IMAP operation with RC1 of evolution as provided in Debian unstable. Is it possible to start evolution in disconnected mode and browse the messages you downloaded in the last session before going online later? I'm running a laptop, so I sometimes want to browse my mail without having been connected in the evo session. Also, is it possible to view the calendar folder offered by Exchange via IMAP as a calendar? At the moment it all appears as a series of messages, as do tasks etcetc. Is it possible to assign custom views to these folders which would allow correct interpretation of the contents? Here's hoping :-) Cheers, Eamonn ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] disconnected IMAP
On Wed, 2001-11-14 at 09:47, Eamonn Hamilton wrote: I've a couple of questions regarding IMAP operation with RC1 of evolution as provided in Debian unstable. Is it possible to start evolution in disconnected mode and browse the messages you downloaded in the last session before going online later? I'm running a laptop, so I sometimes want to browse my mail without having been connected in the evo session. That would be nice wouldn't it. I think maybe a command-line option evolution --disconnected or something similar to start offline would be good. Also, is it possible to view the calendar folder offered by Exchange via IMAP as a calendar? At the moment it all appears as a series of messages, as do tasks etcetc. Is it possible to assign custom views to these folders which would allow correct interpretation of the contents? That would be so nice, especially if Evolution could use IMAP folders for calendar/tasks without requiring an Exchange server. If I were you I'd file wish list bugs for both of these at bugzilla.ximian.com! Ross -- Ross Burton Software Engineer OneEighty Software Ltd Tel: +44 20 8680 8712 Cygnet HouseFax: +44 20 8680 8453 12-14 Sydenham Road [EMAIL PROTECTED] Croydon, Surrey CR9 2ET, UK http://www.180sw.com./ Under the Regulation of Investigatory Powers (RIP) Act 2000 together with any and all Regulations in force pursuant to the Act OneEighty Software Ltd reserves the right to monitor any or all incoming or outgoing communications as provided for under the Act msg03070/pgp0.pgp Description: PGP signature
Re: [Evolution] Return receipts
The discussion on this thread has already shown one form of return-receipt I have never seen before, and passingly gone past the 2 other versions I do know about To take these in turn:- 1. Return-Receipt-To: addr Sends a receipt to the address specified. Great for using on mail to large mailing lists with a 3rd (disliked) party address in the header. Implemented in old sendmail's and maybe even in old RFCs. Implementation of return function is in MTA on final delivery Very strongly deprecated nowadays - and finding MTAs that support it is now pretty hard. 2. DSNs There are RFCs for these (several I think). Complex, return function can be either MTA or MUA, also used in some cases for bounces. Generally the best but most complex to implement. Need options to allow/disallow/ask about replying. 3. X-Return-Receipt-Requested: true Microsoft's answer. Has same privacy implications as others, but at least avoids some of the 3rd party problem of the original Return-Receipt-To: Dan makes some really good points about implementation issues. Nigel. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] filter questions
On Sat, 2001-11-03 at 20:12, Will Benton wrote: I have incoming filters (move to folder) set up for some mailing lists and have Apply filters to new messages selected in my account preferences, but messages to this mailing list still show up in my INBOX. It does work when I right-click on the message and select apply filters, though. * should I change the criterion from Mailing list is to something else? * Is there something else I need to do to get this to work? * Is this a bug? I don't work on Evolution so this is just an educated guess, but it seems that the Mailing list is criteria works by looking for a List-Id header which does not seems to always be inserted by mailing list software such as mailman, majordomo et al. This is a bug, I'd imagine, but a bug in the mailing-list software I suppose - after all it isn't Evolution's fault if the header wasn't inserted (though it would be cunning if it noticed that all emails that have a specific List-Id description also always has the one common recipient in it (the email address of the mailing list) and store that information away for the next time so that Evolution could then ensure that future emails to the mailing list are filtered appropriately. k. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] disconnected IMAP
Also, is it possible to view the calendar folder offered by Exchange via IMAP as a calendar? At the moment it all appears as a series of messages, as do tasks etcetc. Is it possible to assign custom views to these folders which would allow correct interpretation of the contents? That would be so nice, especially if Evolution could use IMAP folders for calendar/tasks without requiring an Exchange server. If I were you I'd file wish list bugs for both of these at bugzilla.ximian.com! I would like to see some coordination between Evolution and Mozilla so that their calendar data is compatible. Not import/export, but direct access from the applications, just like IMAP clients. I like having both Evolution and Mozilla available for IMAP access; it would be great if this held for calendar data as well. It would also provide a smooth migration path to Linux for Outlook users: Outlook/Win - Moz/Win - Moz/Linux - Evo/Linux Or you could just make Evo cross-platform :-) ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] Importing netscape 6.1 files doesn't work !
Hi I'm trying to change to Evolution 0.99. When I wanted to import my netscape 6.1 files the inteligent importers didn't found any and so in step 2 of the evolution importer assistent I had no importers to select. Why is it happening ? is ther a workaround ? Thanks EJ ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Importing netscape 6.1 files doesn't work !
Am Mit, 2001-11-14 um 13.26 schrieb José Ernesto Jardim: Hi I'm trying to change to Evolution 0.99. When I wanted to import my netscape 6.1 files the inteligent importers didn't found any and so in step 2 of the evolution importer assistent I had no importers to select. When you get problem with import you can take the Netscape files like Inbox an cat them in evolution/local/directory/mbox. The Netscape files are also only mbox files. -- Mit freundlichen Grüßen Jürgen Meurer BAD GmbH Herbert-Rabius-Str. 1 53225 Bonn Tel: 0228/40072-70 Email: [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Configuration Database not found
I guess the real question at this point is what information I and others can provide in order to facilitate resolution of this problem? I don't know about others but this is a show-stopper for me and my users. Thanks, Gil On Wed, 2001-11-14 at 03:19, Jon Reynolds wrote: I have this exact same problem. Jon On Tuesday 13 November 2001 07:44 am, Gil Hauer wrote: Well, oaf-config --version reports 0.6.7 As I mentioned, I've tried oaf-slay, killev, logging in and out, rebooting -- nothing seems to work. Thanks, Gil On Tue, 2001-11-13 at 10:54, Matthew J. Doller wrote: i was having similar problems, and i filed a bug about it (14683 - for some reason, i didnt see 11740 at the time) i upgraded oaf to 0.6.7 and it's been working fine since what version of oaf do you have? matt On Tue, 2001-11-13 at 10:26, Gil Hauer wrote: Is there any resolution to this problem? I'm experience this now, having upgraded to 0.99 last night. There seems to be a bug report (11740) but no activity on it :( Oh, and I've tried the killing and slaying route, rebooting several times in between with no luck. Cheers, Gil On Thu, 2001-11-08 at 15:07, Ettore Perazzoli wrote: wombat: error while loading shared libraries: /usr/lib/mozilla/libnspr4.so: undefined symbol: fstat But as I said. As root it starts. I am not sure what it could be, but it sounds like a permission problem on your libraries. Can you try installing our packages instead? -- Ettore ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution -- Matthew J. Doller [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] POP mail: read messages not retrieved
Hi, I installed the latest snapshot this morning (20031947), and noticed a rather fundamental change in the behaviour of the POP mail retrieval. Namely, read messages are not fetched at all anymore. Until now, Evo would correctly distinguish messages it had already fetched and messages that had been read by other means on the server (be it another POP client somewhere else, or a command-line mailer on the server). It would not fetch the former again, but would fetch the latter. This is really annoying (to put it mildly) for people who use POP from multiple machines and for whom IMAP is not possible. Any chance of getting this bug squashed, or was this an intentional chance ? Richard. -- Richard Bellavance COGNICASE inc. Analyste-programmeur principal Hébergement, sécurité et réseaux T.: 514-732-8000 #4153 20, Place du Commerce F.: 514-732-8021 Verdun, Qc, H3E 1Z6, CANADA ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] simple filter import/export idea
Hi all, Thought I'd pipe in and firstly mention that my charsets problem that I reported way back on the 5th is gone now that I 'evolved' up to the 11.06.15.04 snapshot. Thanks guys! I'd like to mention the one cool thing that I'd like to see in Evolution sometime, nothing urgent, just a 'wouldn't it be cool if' feature: It'd be nice to be able to import filters (from at least other Evolution users, maybe even from Mozilla Outlook files too). This would let people exchange spam-filters, and any other filter for that matter. (I know that procmail et al could/should be used for catching such things, but when you're connecting into an Exchange server then that just isn't possible) k. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Configuration Database not found
I agree with this. I've sent in some info on it, but I don't know that it was enough - it was what ximian reps asked for. I've heard no more about it. Also, If anyone knows the bug number for this and can supply it I would appreciate it. I've tried every combination I can think of on bugtrak and can come up with nothing on it. Best Regards, DCM On Wed, 2001-11-14 at 08:01, Gil Hauer wrote: I guess the real question at this point is what information I and others can provide in order to facilitate resolution of this problem? I don't know about others but this is a show-stopper for me and my users. Thanks, Gil On Wed, 2001-11-14 at 03:19, Jon Reynolds wrote: I have this exact same problem. Jon On Tuesday 13 November 2001 07:44 am, Gil Hauer wrote: Well, oaf-config --version reports 0.6.7 As I mentioned, I've tried oaf-slay, killev, logging in and out, rebooting -- nothing seems to work. Thanks, Gil On Tue, 2001-11-13 at 10:54, Matthew J. Doller wrote: i was having similar problems, and i filed a bug about it (14683 - for some reason, i didnt see 11740 at the time) i upgraded oaf to 0.6.7 and it's been working fine since what version of oaf do you have? matt On Tue, 2001-11-13 at 10:26, Gil Hauer wrote: Is there any resolution to this problem? I'm experience this now, having upgraded to 0.99 last night. There seems to be a bug report (11740) but no activity on it :( Oh, and I've tried the killing and slaying route, rebooting several times in between with no luck. Cheers, Gil On Thu, 2001-11-08 at 15:07, Ettore Perazzoli wrote: wombat: error while loading shared libraries: /usr/lib/mozilla/libnspr4.so: undefined symbol: fstat But as I said. As root it starts. I am not sure what it could be, but it sounds like a permission problem on your libraries. Can you try installing our packages instead? -- Ettore ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution -- Matthew J. Doller [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] simple filter import/export idea
FWIW, it's pretty straightforward to just cut and past XML from the filters and vfolders. 'less ~/evolution/v*xml' is your friend. Obviously, this is less sophisticated than your suggestion, but for most cases is a pretty straightforward solution. Luis On Wed, 2001-11-14 at 08:41, Ken Guest wrote: Hi all, Thought I'd pipe in and firstly mention that my charsets problem that I reported way back on the 5th is gone now that I 'evolved' up to the 11.06.15.04 snapshot. Thanks guys! I'd like to mention the one cool thing that I'd like to see in Evolution sometime, nothing urgent, just a 'wouldn't it be cool if' feature: It'd be nice to be able to import filters (from at least other Evolution users, maybe even from Mozilla Outlook files too). This would let people exchange spam-filters, and any other filter for that matter. (I know that procmail et al could/should be used for catching such things, but when you're connecting into an Exchange server then that just isn't possible) k. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Configuration Database not found
I think the relevant bug id is #11740. What did info did you supply Ximian? Perhaps I can collect the same in order to speed things up? Cheers, Gil On Wed, 2001-11-14 at 09:07, Duane C. Mallory wrote: I agree with this. I've sent in some info on it, but I don't know that it was enough - it was what ximian reps asked for. I've heard no more about it. Also, If anyone knows the bug number for this and can supply it I would appreciate it. I've tried every combination I can think of on bugtrak and can come up with nothing on it. Best Regards, DCM On Wed, 2001-11-14 at 08:01, Gil Hauer wrote: I guess the real question at this point is what information I and others can provide in order to facilitate resolution of this problem? I don't know about others but this is a show-stopper for me and my users. Thanks, Gil On Wed, 2001-11-14 at 03:19, Jon Reynolds wrote: I have this exact same problem. Jon On Tuesday 13 November 2001 07:44 am, Gil Hauer wrote: Well, oaf-config --version reports 0.6.7 As I mentioned, I've tried oaf-slay, killev, logging in and out, rebooting -- nothing seems to work. Thanks, Gil On Tue, 2001-11-13 at 10:54, Matthew J. Doller wrote: i was having similar problems, and i filed a bug about it (14683 - for some reason, i didnt see 11740 at the time) i upgraded oaf to 0.6.7 and it's been working fine since what version of oaf do you have? matt On Tue, 2001-11-13 at 10:26, Gil Hauer wrote: Is there any resolution to this problem? I'm experience this now, having upgraded to 0.99 last night. There seems to be a bug report (11740) but no activity on it :( Oh, and I've tried the killing and slaying route, rebooting several times in between with no luck. Cheers, Gil On Thu, 2001-11-08 at 15:07, Ettore Perazzoli wrote: wombat: error while loading shared libraries: /usr/lib/mozilla/libnspr4.so: undefined symbol: fstat But as I said. As root it starts. I am not sure what it could be, but it sounds like a permission problem on your libraries. Can you try installing our packages instead? -- Ettore ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution -- Matthew J. Doller [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] simple filter import/export idea
On Wed, 2001-11-14 at 13:45, Luis Villa wrote: FWIW, it's pretty straightforward to just cut and past XML from the filters and vfolders. 'less ~/evolution/v*xml' is your friend. Obviously, this is less sophisticated than your suggestion, but for most cases is a pretty straightforward solution. Luis I do know all about the filters being saved as XML and that the can be copied and pasted with a text editor, but you have to understand that most users, I'd imagine, would much prefer to be insulated from having to do such a thing, besides which not having to edit the filters.xml makes the whole thing much less prone to overwrite or mangle the file. k. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] test
test (haven't been able to send to [EMAIL PROTECTED]) ///o-o\\\ Jamie LaScolea ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Configuration Database not found
I did a stack trace on wombat, oaf, and evolution-mail components. Best Regards, DCM On Wed, 2001-11-14 at 09:12, Gil Hauer wrote: I think the relevant bug id is #11740. What did info did you supply Ximian? Perhaps I can collect the same in order to speed things up? Cheers, Gil On Wed, 2001-11-14 at 09:07, Duane C. Mallory wrote: I agree with this. I've sent in some info on it, but I don't know that it was enough - it was what ximian reps asked for. I've heard no more about it. Also, If anyone knows the bug number for this and can supply it I would appreciate it. I've tried every combination I can think of on bugtrak and can come up with nothing on it. Best Regards, DCM On Wed, 2001-11-14 at 08:01, Gil Hauer wrote: I guess the real question at this point is what information I and others can provide in order to facilitate resolution of this problem? I don't know about others but this is a show-stopper for me and my users. Thanks, Gil On Wed, 2001-11-14 at 03:19, Jon Reynolds wrote: I have this exact same problem. Jon On Tuesday 13 November 2001 07:44 am, Gil Hauer wrote: Well, oaf-config --version reports 0.6.7 As I mentioned, I've tried oaf-slay, killev, logging in and out, rebooting -- nothing seems to work. Thanks, Gil On Tue, 2001-11-13 at 10:54, Matthew J. Doller wrote: i was having similar problems, and i filed a bug about it (14683 - for some reason, i didnt see 11740 at the time) i upgraded oaf to 0.6.7 and it's been working fine since what version of oaf do you have? matt On Tue, 2001-11-13 at 10:26, Gil Hauer wrote: Is there any resolution to this problem? I'm experience this now, having upgraded to 0.99 last night. There seems to be a bug report (11740) but no activity on it :( Oh, and I've tried the killing and slaying route, rebooting several times in between with no luck. Cheers, Gil On Thu, 2001-11-08 at 15:07, Ettore Perazzoli wrote: wombat: error while loading shared libraries: /usr/lib/mozilla/libnspr4.so: undefined symbol: fstat But as I said. As root it starts. I am not sure what it could be, but it sounds like a permission problem on your libraries. Can you try installing our packages instead? -- Ettore ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution -- Matthew J. Doller [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] email as alarm type
Knowing that some of the original developers of gnomecal also work on evolution, and since evolution is an _integrated_ email/calendar/etc., it seem a little odd to me that there is no option to email a reminder to someone. I could run mail, but I could do that with a cron or at job. Am I missing something really obvious? -EJR P.S. Oh, the gnomecal reference was because gnomecal DID allow one to email reminders...for those of you that never used it in the past. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] POP mail: read messages not retrieved
The POP checking code never changed to not download read messages, in fact this concept doesn't even exist in the POP protocol. Evolution still does the same thing as it always has, it will only download messages that it has not yet downloaded before. My best guess is that your other client is deleting the messages off the server. Jeff On Wed, 2001-11-14 at 08:37, Richard Bellavance wrote: Hi, I installed the latest snapshot this morning (20031947), and noticed a rather fundamental change in the behaviour of the POP mail retrieval. Namely, read messages are not fetched at all anymore. Until now, Evo would correctly distinguish messages it had already fetched and messages that had been read by other means on the server (be it another POP client somewhere else, or a command-line mailer on the server). It would not fetch the former again, but would fetch the latter. This is really annoying (to put it mildly) for people who use POP from multiple machines and for whom IMAP is not possible. Any chance of getting this bug squashed, or was this an intentional chance ? Richard. -- Richard Bellavance COGNICASE inc. Analyste-programmeur principal Hébergement, sécurité et réseaux T.: 514-732-8000 #4153 20, Place du Commerce F.: 514-732-8021 Verdun, Qc, H3E 1Z6, CANADA ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Configuration Database not found
Gil, There must be more than one bug report on this - the number you gave does have some stuff on it, but others have stated they added comments to this bug report that fixed their problem, but I don't see the comments. Your description of what causes this failure and what causes my failure are, from what I can see, different. In my case, this is the scenario: 1) log in to ximian desktop. 2) start evolution (doesn't matter how) - get error message 3) run 'oaf-slay' 4) from this point on evolution runs fine - I can exit evolution, restart evolution, no problem. 5) exit ximian desktop 6) back to step 1. For some reason, logging out from ximian desktop and back in initiates the entire problem. Best Regards, DCM On Wed, 2001-11-14 at 09:12, Gil Hauer wrote: I think the relevant bug id is #11740. What did info did you supply Ximian? Perhaps I can collect the same in order to speed things up? Cheers, Gil On Wed, 2001-11-14 at 09:07, Duane C. Mallory wrote: I agree with this. I've sent in some info on it, but I don't know that it was enough - it was what ximian reps asked for. I've heard no more about it. Also, If anyone knows the bug number for this and can supply it I would appreciate it. I've tried every combination I can think of on bugtrak and can come up with nothing on it. Best Regards, DCM On Wed, 2001-11-14 at 08:01, Gil Hauer wrote: I guess the real question at this point is what information I and others can provide in order to facilitate resolution of this problem? I don't know about others but this is a show-stopper for me and my users. Thanks, Gil On Wed, 2001-11-14 at 03:19, Jon Reynolds wrote: I have this exact same problem. Jon On Tuesday 13 November 2001 07:44 am, Gil Hauer wrote: Well, oaf-config --version reports 0.6.7 As I mentioned, I've tried oaf-slay, killev, logging in and out, rebooting -- nothing seems to work. Thanks, Gil On Tue, 2001-11-13 at 10:54, Matthew J. Doller wrote: i was having similar problems, and i filed a bug about it (14683 - for some reason, i didnt see 11740 at the time) i upgraded oaf to 0.6.7 and it's been working fine since what version of oaf do you have? matt On Tue, 2001-11-13 at 10:26, Gil Hauer wrote: Is there any resolution to this problem? I'm experience this now, having upgraded to 0.99 last night. There seems to be a bug report (11740) but no activity on it :( Oh, and I've tried the killing and slaying route, rebooting several times in between with no luck. Cheers, Gil On Thu, 2001-11-08 at 15:07, Ettore Perazzoli wrote: wombat: error while loading shared libraries: /usr/lib/mozilla/libnspr4.so: undefined symbol: fstat But as I said. As root it starts. I am not sure what it could be, but it sounds like a permission problem on your libraries. Can you try installing our packages instead? -- Ettore ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution -- Matthew J. Doller [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] POP mail: read messages not retrieved
On Wed, 2001-11-14 at 10:34, Jeffrey Stedfast wrote: The POP checking code never changed to not download read messages, in fact this concept doesn't even exist in the POP protocol. D'oh ! You're right. My best guess is that your other client is deleting the messages off the server. I can assure you that was not the case. I'm the sysadmin of the server in question (and so have access to mailbox contents). Sadly (some would say of course :-), I can't reproduce the problem anymore. It probably was a case of brain fade on my part. Sorry about that, I'll try to reproduce problems more thoroughly before sending a bug report in the future. Keep up the good work ! Richard. -- Richard Bellavance COGNICASE inc. Analyste-programmeur principal Hébergement, sécurité et réseaux T.: 514-732-8000 #4153 20, Place du Commerce F.: 514-732-8021 Verdun, Qc, H3E 1Z6, CANADA ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Importing netscape 6.1 files doesn't work !
On Wed, 2001-11-14 at 12:46, Jürgen Meurer wrote: Am Mit, 2001-11-14 um 13.26 schrieb José Ernesto Jardim: Hi I'm trying to change to Evolution 0.99. When I wanted to import my netscape 6.1 files the inteligent importers didn't found any and so in step 2 of the evolution importer assistent I had no importers to select. When you get problem with import you can take the Netscape files like Inbox an cat them in evolution/local/directory/mbox. The Netscape files are also only mbox files. Or use the single file importer option. Netscape 6.1 is based on Mozilla and there isn't an intelligent importer for it yet. iain -- Hope (n): The theological virtue defined as the desire and search for a future good, difficult but not impossible to attain with God's help. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] Format quer
Hey, Though my addressbook issue doesn't appear to have been addressed, I want to ask about mail format. I can't find any way to turn html completely off, as I could in other gui readers. I like the feature to not download pics from Web pages, but why no option to just shut down html? At the very least, as I'm rather light sensitive, it would be nice to be able to override the html colour scemes that I could turn the backgournd fonts to colours of my choice (ie colours which don't hurt). For that matter, the only colour change I can find is for the colour of quoted fonts. I know that gtk/evolution themes are supported, but I've yet to find one of those which works ~~ has a scheme my eyes can deal with easily for RH 7.2, Ximian -- current version, evo 0.99.1, etc. Any chance such colour control html shut off fewtures might be considered? Meph -- I did this 'cause Linux gives me a woody. -Dave '-ddt-' Taylor, announcing DOOM for Linux ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] new snaps out
There is a new batch of snaps out; please grab them and pound on them. FWIW, the last batch of snaps had extremely bad hang issues because of a build problem, so please upgrade ASAP. Luis ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Importing netscape 6.1 files doesn't work !
Hi The single file importer doesn't import my contact list. How can I do it ? EJ Iain wrote: 1005753198.27806.0.camel@anti-slavery"> On Wed, 2001-11-14 at 12:46, Jrgen Meurer wrote: Am Mit, 2001-11-14 um 13.26 schrieb Jos Ernesto Jardim: HiI'm trying to change to Evolution 0.99.When I wanted to import my netscape 6.1 files the "inteligent importers"didn't found any and so in step 2 of the "evolution importer assistent"I had no importers to select. When you get problem with import you can take the Netscape files likeInbox an cat them in evolution/local/"directory"/mbox.The Netscape files are also only mbox files. Or use the single file importer option.Netscape 6.1 is based on Mozilla and there isn't an intelligent importerfor it yet.iain
Re: [Evolution] POP mail: read messages not retrieved
Am Mit, 2001-11-14 um 16.37 schrieb Richard Bellavance: On Wed, 2001-11-14 at 10:34, Jeffrey Stedfast wrote: The POP checking code never changed to not download read messages, in fact this concept doesn't even exist in the POP protocol. D'oh ! You're right. My best guess is that your other client is deleting the messages off the server. I can assure you that was not the case. I'm the sysadmin of the server in question (and so have access to mailbox contents). I don't know if a something I recognized in the past could be the problem. Whe you get mails and you interrupt the process evolution was not able to take the mails from the server which are not fetched. Only if a new mail arrives evolution loads also the other old mails from the server. I had this problem in 0.16 and I don't know if it exists in the new releases. -- Mit freundlichen Grüßen Jürgen Meurer BAD GmbH Herbert-Rabius-Str. 1 53225 Bonn Tel: 0228/40072-70 Email: [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Changing Quotation String?
On Wed, 2001-11-14 at 11:08, Brett Johnson wrote: On Tue, 2001-11-13 at 19:55, Mike Strock wrote: On Tue, 2001-11-13 at 12:25, Brett Johnson wrote: On Tue, 2001-11-13 at 11:54, Jeffrey Stedfast wrote: No, it's not possible. I suppose we could add the feature but I personally am not sure I like the idea. If people change the prefix, then it becomes impossible (not hard, but impossible) to colourize and/or do anything cool with quoted text in general. Nonsense. A fixed quotation string is only needed if one is too lazy to implement the solution correctly. [...] Calling people lazy because they didn't implement your pet feature is poor, in my opinion. My apologies for the way that sounded. I didn't mean that the implementors of Evo are lazy. What I meant to say was that a simple it's impossible reply (or even a it's too hard reply) was rather lazy (besides being quite incorrect). Again my apologies to the Ximian folks and other Evolution contributors. Evolution is an *awesome* piece of work, you folks are *definately* not lazy. No offense taken, however I don't know if I like the idea of a regex, our target users are not perl hackers :-) I will keep the regex approach in mind though. Jeff BTW, definable quotation strings are definately *not* my pet feature - I couldn't care much less about it. _My_ pet feature request is that LDAP search attributes be customizable for the auto-completion feature. Cheers! -- Brett Johnson [EMAIL PROTECTED] - i n v e n t - ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] toolbar button text
howdy, at one point, i could swear my toolbar buttons did not have any text, only icons. recently however, this is not the case. i have the GNOME Control Center - Look and Feel - Applications - Toolbars have text labels checkbox UNchecked, yet the text for evolution is still there. has this changed semi-recently? is there an area in evolution to configure this? i really don't like the text :) thanx! -- ///o-o\\\ Jamie LaScolea ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Changing Quotation String?
The nice thing about a regexp is that it can be as simple as ^ (for those that just want something simple), or as complex as ^(([ ]|[A-Z])*[|:}#])+ for those that want something more capable. This should be selectable then - Bob Smith isn't going to understand /^/ inserts a at the beginning of a line. Perhaps the dialog should have two checkable options, one for straight text insertion, and one for regex quoting. Obviously, v1.1 :) --Mark ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] device full?
During composition of e-mail, sending of e-mail and perhaps some other actions (I can't remember), I am getting a warning that evo can't save things because the device is full. I have 10GB of free space on the partition that everything but the boot files lives on, so I don't know what device it is talking about. Any suggenstions? -- +-| HOME |--| Warren G. Anderson |---| WORK |-+ | 1360 Bluewing Circle | The University of Texas at Brownsville | | Brownsville, TX, 78520 | 80 Fort Brown, Brownville TX, 78520| | PHONE: (956) 350-0968 | PHONE: (956) 574-6746 | | CELL : (956) 499-6447 | FAX : (956) 574-6726 | ++---+---+---++ | EMAIL: [EMAIL PROTECTED] | WWW: http://dirac.utb.edu/~warren | +---+---+ ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Format quer
On Wed, 2001-11-14 at 08:53, Meph Istopheles wrote: Hey, Though my addressbook issue doesn't appear to have been addressed, I want to ask about mail format. I can't find any way to turn html completely off, as I could in other gui readers. I like the feature to not download pics from Web pages, but why no option to just shut down html? At the very least, as I'm rather light sensitive, it would be nice to be able to override the html colour scemes that I could turn the backgournd fonts to colours of my choice (ie colours which don't hurt). For that matter, the only colour change I can find is for the colour of quoted fonts. I know that gtk/evolution themes are supported, but I've yet to find one of those which works ~~ has a scheme my eyes can deal with easily for RH 7.2, Ximian -- current version, evo 0.99.1, etc. Any chance such colour control html shut off fewtures might be considered? While it is not exactly the same, it is similar to: http://bugzilla.ximian.com/show_bug.cgi?id=7255 You may want to add additional info to that, or open a new one... Regards, -- Mike Leckey, Jr.[EMAIL PROTECTED]602.231.1685 Honeywell Engines Systems Phoenix, AZ ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] filter questions
Ken, I believe there can also be issues with filters on incoming messages and IMAP servers. I'm not sure what criteria you have set up on your filter, but any body filtering doesn't happen until the message is downloaded. -- John Sturgeon Systems Architect SenaReider Inc. On Wed, 2001-11-14 at 02:57, Ken Guest wrote: On Sat, 2001-11-03 at 20:12, Will Benton wrote: I have incoming filters (move to folder) set up for some mailing lists and have Apply filters to new messages selected in my account preferences, but messages to this mailing list still show up in my INBOX. It does work when I right-click on the message and select apply filters, though. * should I change the criterion from Mailing list is to something else? * Is there something else I need to do to get this to work? * Is this a bug? I don't work on Evolution so this is just an educated guess, but it seems that the Mailing list is criteria works by looking for a List-Id header which does not seems to always be inserted by mailing list software such as mailman, majordomo et al. This is a bug, I'd imagine, but a bug in the mailing-list software I suppose - after all it isn't Evolution's fault if the header wasn't inserted (though it would be cunning if it noticed that all emails that have a specific List-Id description also always has the one common recipient in it (the email address of the mailing list) and store that information away for the next time so that Evolution could then ensure that future emails to the mailing list are filtered appropriately. k. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] How do I enable spellchecking in Evolution?
Hello, I've downloaded Evolution 0.99.0 for RH7.1 using Red Carpet. How do I enable spellchecking? It's not hilited like the other options under Edit. Regards, Kristian msg03110/pgp0.pgp Description: PGP signature
Re: [Evolution] Emacs-like keybindings?
On Wed, 2001-11-14 at 11:54, Jim Meyer wrote: Hello! I'm driving myself crazy trying to use Ctrl-E to get to the end of a line, Ctrl-A to get to the beginning of a line, and Ctrl-K to delete to end of line. Is there any help for me, or am I doomed to an eternity of Find Regular Expression, Select All, and no response? This drove me crazy too. From the Compose window, do: Edit-Properties Select the Keyboard Shortcuts tab Set the Shortcuts Type field to Emacs like Bob Haddleton ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] Reply should come from source account
Hello! I'm having all sorts of fun with the fact that Evo always uses your default account to reply from, even if the mail was sent to a different source account. It's particularly hitting me hard on this list, where I've got my personal account on the list; as you may have guessed, it's my work account which is chosen as default. Shouldn't Evo consider the source account of the message being replied to and set the From address accordingly? Evo 0.99.1cvs.2001.11.14.08.58 here. Cheers! --j -- Jim Meyer, Geek At Large [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] still no palm syncing?
I'm still not able to sync with my palm: gpilotd: relocation error: gpilotd: undefined symbol: stat Is this my problem or are there still problems linking in the libraries? Thanks! -- John Sturgeon Systems Architect SenaReider Inc. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Reply should come from source account
It does, but I guess the logic is off a bit or something. I don't know, I can't find the problem... Jeff On Wed, 2001-11-14 at 13:46, Jim Meyer wrote: Hello! I'm having all sorts of fun with the fact that Evo always uses your default account to reply from, even if the mail was sent to a different source account. It's particularly hitting me hard on this list, where I've got my personal account on the list; as you may have guessed, it's my work account which is chosen as default. Shouldn't Evo consider the source account of the message being replied to and set the From address accordingly? Evo 0.99.1cvs.2001.11.14.08.58 here. Cheers! --j -- Jim Meyer, Geek At Large [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] FEATURE: Evo should note unedited messages
Here's a feature for 1.8 or so ;] Evo should notice that a new message has not been edited (e.g. no addresses added, no subject, and nothing typed in the message) or that a reply has not been changed and not prompt for saving if you close the message. Cheers! --j -- Jim Meyer, Geek At Large [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Outlook express dbx files
Outlook Express is in the rc1 importer. On Tue, 2001-11-13 at 18:51, Thomas Duffy wrote: On Mon, 2001-11-12 at 10:08, Gonyou, Austin wrote: How do I import those? Or, how do I make a mbx file from outlook express? I think there is a FAQ about this, but Evo does not do this by default...Netscape 4.x or maybe 6.2 for windoze will do it and then you can save them to other formats... -tduffy ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution -- Austin Gonyou Systems Architect, CCNA Coremetrics, Inc. Phone: 512-796-9023 email: [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] HTML viewing freezes Evo?
I am noticing in the most recent snapshot (11.13.19.43) that if I click on an HTML link in an email, evo just sort of locks my mouse into the hand-shaped pointer and refuses to let me do anything. I have to go into a text terminal and do a killev. Anyone else having this problem and I missed it in the list? Using RH 7.2 (2.4.9-13). BTW, prior to today, it had worked fine ... opened whatever link I clicked on in my email in galeon. Brian ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] dumb question about mail delivery types (take 2)
I sent this several days ago and didn't get a response - so since I haven't figured it out on my own, I figured I'd send it again, in the hopes that someone might throw me a bone... So - currently I use fetchmail and procmail to fetch my mail from several POP servers and deliver directly to ~/evolution/local/Inbox/mbox - works great - and allows me to use both evo and mutt to read my mail without too many hoops to jump through. The only downsides are (a) to see new messages in Evo I have to expunge my inbox (i.e. evo can't autocheck every n minutes) and (b) I can't use filters. I spent a bit of time this morning experimenting with the various mail delivery options in Evo in an effort to get filters working - and I'm now pretty confused. There are 6 options - 4 if you exclude POP and IMAP: Standard Unix mbox spools Maildir-format mail directories Local Delivery None I'm unclear on a few things: 1. what's the difference between Standard Unix mbox spools and local delivery? The former says it's for reading and storing local mail in standard mbox spool files and the latter says for retrieving local mail from standard mbox formatted spools. Does that mean that standard unix mbox spools doesn't move mail between the selected spool and your inbox? 2. maildir-format mail directories says it's for storing local mail in maildir directories - does that mean it does or doesn't move things from the folder specified into your inbox? 3. Why does the apply filters to messages in INBOX option vanish from Receiving Options when you select local delivery? I tried a couple things without success: 1. changing procmail to deliver to /var/spool/mail/dberger in mbox format and changing one of my evo accounts to local delivery. I sent (and received) a test message to myself and tried to get evo to snatch it via Send/Receive - the message was never found. 2. changing procmail to deliver to ~/Mail/INBOX in Maildir format and selecting maildir format directories - with the directory pointed at ~/Mail/Inbox. Again, send and receive a test message - but evo never picked it up and moved it to my inbox when I did Send/Receive. Anyone have any ideas, or clarification on how the various mail delivery options are supposed to work? -- Dan Berger [[EMAIL PROTECTED]] http://home.ix.netcom.com/~dberger Inter arma silent leges Experience should teach us to be most on our guard to protect liberty when the government's purposes are beneficent. Men born to freedom are naturally alert to repel invasion of their liberty by evil minded rulers. The greatest dangers to liberty lurk in insidious encroachment by men of zeal, well-meaning but without understanding. Justice Louis Brandeis, dissenting, Olmstead v US (1928) A982 E6B1 CB2F 7A49 843A 9297 DA73 4371 1F54 8D0C msg03124/pgp0.pgp Description: PGP signature
Re: [Evolution] Reply should come from source account
Yes, that is correct behavior - you can change the smtp server you use, it is just a good default to auto-set...don't you think? Jeff On Wed, 2001-11-14 at 14:16, Mike Strock wrote: On Wed, 2001-11-14 at 10:46, Jim Meyer wrote: Hello! I'm having all sorts of fun with the fact that Evo always uses your default account to reply from, even if the mail was sent to a different source account. It's particularly hitting me hard on this list, where I've got my personal account on the list; as you may have guessed, it's my work account which is chosen as default. Shouldn't Evo consider the source account of the message being replied to and set the From address accordingly? Evo 0.99.1cvs.2001.11.14.08.58 here. Possibly along these same lines, the default 'send server' is the one from the default account, and it always defaults to that send server when defining new accounts. IE: I have a pop3 account set up, with an SMTP server (this is my main account). I also have an IMAP account set up, but when I get to defining how to send mail for that account, it shows me the SMTP server from the POP3 account as the server to send from. Is this correct behavior? Build +cvs.2001.11.14.08.58 . Mike Strock [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Reply should come from source account
On Wed, 2001-11-14 at 11:35, Jeffrey Stedfast wrote: Yes, that is correct behavior - you can change the smtp server you use, it is just a good default to auto-set...don't you think? I would think that since you are creating a new account (which may or may not have knowledge of the other account) that you would default to NONE, and allow the user to enter their own preference, whether it be the SMTP server from the default account, or something else. Just my opinion though. It works the way it is now. :) Mike Strock [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] HTML viewing freezes Evo?
Upgrade to at least 11.14.08.58 and it'll be fixed. Thanks! Luis On Wed, 2001-11-14 at 14:21, Brian wrote: I am noticing in the most recent snapshot (11.13.19.43) that if I click on an HTML link in an email, evo just sort of locks my mouse into the hand-shaped pointer and refuses to let me do anything. I have to go into a text terminal and do a killev. Anyone else having this problem and I missed it in the list? Using RH 7.2 (2.4.9-13). BTW, prior to today, it had worked fine ... opened whatever link I clicked on in my email in galeon. Brian ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Reply should come from source account
But pretend you are setting up evolution to check mail from your work address and your isp mail address, you'd want both accounts to use your isp's smtp server and if your isp mail address was your default (as it would be if you were setting up your home box), then when you created your work account you'd want it to default to use your isp's smtp server so you wouldn't have to type in the same info all over again. see the logic? Jeff On Wed, 2001-11-14 at 14:29, Mike Strock wrote: On Wed, 2001-11-14 at 11:35, Jeffrey Stedfast wrote: Yes, that is correct behavior - you can change the smtp server you use, it is just a good default to auto-set...don't you think? I would think that since you are creating a new account (which may or may not have knowledge of the other account) that you would default to NONE, and allow the user to enter their own preference, whether it be the SMTP server from the default account, or something else. Just my opinion though. It works the way it is now. :) Mike Strock [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] HTML viewing freezes Evo?
Hey Brian, You actually don't have the latest snapshot. Get 11.14.08.58. The problem has been fixed. -- John Sturgeon Systems Architect SenaReider Inc. On Wed, 2001-11-14 at 11:21, Brian wrote: I am noticing in the most recent snapshot (11.13.19.43) that if I click on an HTML link in an email, evo just sort of locks my mouse into the hand-shaped pointer and refuses to let me do anything. I have to go into a text terminal and do a killev. Anyone else having this problem and I missed it in the list? Using RH 7.2 (2.4.9-13). BTW, prior to today, it had worked fine ... opened whatever link I clicked on in my email in galeon. Brian ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] How do I enable spellchecking in Evolution?
Do you have gnome-spell installed? Luis On Wed, 2001-11-14 at 15:16, Brett Johnson wrote: On Wed, 2001-11-14 at 11:46, Mike Strock wrote: Install ASpell . Spell checking is working nicely here. Is spellchecking disabled in the ximian binaries then? I've got aspell installed, yet the spellcheck document... menu item is greyed out (same problem as Kristian). # rpm -qa | grep aspell libaspell10-0.33.7.1-1mdk aspell-en_GB-0.33.7.1-1mdk libaspell10-devel-0.33.7.1-1mdk aspell-0.33.7.1-1mdk On Wed, 2001-11-14 at 10:13, Kristian Sorensen wrote: Hello, I've downloaded Evolution 0.99.0 for RH7.1 using Red Carpet. How do I enable spellchecking? It's not hilited like the other options under Edit. Cheers! -- Brett Johnson [EMAIL PROTECTED] - i n v e n t - ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] How do I enable spellchecking in Evolution?
Spell-checking works fine. The package you need is called gnome-spell, and it's available in the Ximian Gnome Desktop channel of Red Carpet, or at: http://rpmfind.net//linux/RPM/helix/ximian-gnome/suse-72-i386/gnome-spell-0.4-ximian.1.i386.html HTH, -- coop On Wed, 2001-11-14 at 15:16, Brett Johnson wrote: On Wed, 2001-11-14 at 11:46, Mike Strock wrote: Install ASpell . Spell checking is working nicely here. Is spellchecking disabled in the ximian binaries then? I've got aspell installed, yet the spellcheck document... menu item is greyed out (same problem as Kristian). # rpm -qa | grep aspell libaspell10-0.33.7.1-1mdk aspell-en_GB-0.33.7.1-1mdk libaspell10-devel-0.33.7.1-1mdk aspell-0.33.7.1-1mdk On Wed, 2001-11-14 at 10:13, Kristian Sorensen wrote: Hello, I've downloaded Evolution 0.99.0 for RH7.1 using Red Carpet. How do I enable spellchecking? It's not hilited like the other options under Edit. Cheers! -- Brett Johnson [EMAIL PROTECTED] - i n v e n t - ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] How do I enable spellchecking in Evolution?
You enable it in the control center, under the html thingy. Unfortunately, you can only have one language active at a time, though (making it fairly useless for me...) On Wed, 2001-11-14 at 21:16, Brett Johnson wrote: On Wed, 2001-11-14 at 11:46, Mike Strock wrote: Install ASpell . Spell checking is working nicely here. Is spellchecking disabled in the ximian binaries then? I've got aspell installed, yet the spellcheck document... menu item is greyed out (same problem as Kristian). # rpm -qa | grep aspell libaspell10-0.33.7.1-1mdk aspell-en_GB-0.33.7.1-1mdk libaspell10-devel-0.33.7.1-1mdk aspell-0.33.7.1-1mdk On Wed, 2001-11-14 at 10:13, Kristian Sorensen wrote: Hello, I've downloaded Evolution 0.99.0 for RH7.1 using Red Carpet. How do I enable spellchecking? It's not hilited like the other options under Edit. Cheers! -- Brett Johnson [EMAIL PROTECTED] - i n v e n t - ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution -- Trust the Computer. The Computer is your friend. Mr. Jan Morén Dept. of Cognitive Science Tel. +46-046 222 8588 Kungshuset, Lund Fax. +46-046 222 9758 S-222 22 Lund, Sweden ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] Error setting evolution: shortcut to inbox cannot be created
Hello. When running evolution 0.99.0 for the first time in my Red Hat Linux 7.2 box, at the setup assistant, I receive the following error message: Error: Could not get inbox for new mail store: Could not lock '/var/spool/mail/romildo' No shortcut will be created. I was configuring with the Server Type Standard Unix mbox spools for receiving email, and Sendmail for sending email. I have been using an ADSL connection to the internet, fetching mail from the provider with fetchmail, and sendmail to deliver my email. Any clues? Romildo -- Prof. José Romildo Malaquias Departamento de Computação http://iceb.ufop.br/~romildo Universidade Federal de Ouro Preto [EMAIL PROTECTED] Brasil [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Error setting evolution: shortcut to inbox cannotbe created
I get the same here, as i have all my root mail redirected to my own local mail spool (pine works fine on the local spool).. ls -al /usr/sbin/camel-lock-helper -rwxr-xr-x1 root root7476 /usr/sbin/camel-lock-helper and also ls -ld /var/spool/mail drwxrwxr-x2 root mail 4096 /var/spool/mail Any suggestions (Iam using evo-0.99.1) Mark On Wed, 2001-11-14 at 23:13, NotZed wrote: Probably known packaging issue. What is the permissions on /usr/sbin/camel-lock-helper and the permissions on /var/spool/mail? i.e. ls -l /usr/sbin/camel-lock-helper ls -ld /var/spoo/mail Hello. When running evolution 0.99.0 for the first time in my Red Hat Linux 7.2 box, at the setup assistant, I receive the following error message: Error: Could not get inbox for new mail store: Could not lock '/var/spool/mail/romildo' No shortcut will be created. I was configuring with the Server Type Standard Unix mbox spools for receiving email, and Sendmail for sending email. I have been using an ADSL connection to the internet, fetching mail from the provider with fetchmail, and sendmail to deliver my email. Any clues? Romildo -- Prof. José Romildo Malaquias Departamento de Computação http://iceb.ufop.br/~romildo Universidade Federal de Ouro Preto [EMAIL PROTECTED] Brasil [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Importing netscape 6.1 files doesn't work !
On Wed, 2001-11-14 at 17:06, José Ernesto Jardim wrote: Hi The single file importer doesn't import my contact list. How can I do it ? If you can export them to either vcard or ldif format, there's importers for them. iain -- Hope (n): The theological virtue defined as the desire and search for a future good, difficult but not impossible to attain with God's help. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Outlook express dbx files
Most of the text of text messages is in there. I believe the spec is published on MS as well. On Wed, 2001-11-14 at 14:33, Trygve Falch wrote: On Wed, 2001-11-14 at 20:16, Austin Gonyou wrote: Outlook Express is in the rc1 importer. Yes, Outlook Express 4, but not Outlook Express 5. DBX-files are new with Outlook Express 5 and not surprisingly, they are all binaries. (looks like they merged .mbx + .idx into .dbx.) Would be nice if someone could figure them out though. -- Austin Gonyou Systems Architect, CCNA Coremetrics, Inc. Phone: 512-796-9023 email: [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] Source Account Filtering
Hi All, I'm running 0.99 on YDL 2.0. It looks like the Source Account Filter option still doesn't work, unfortunately. Is this a known issue? Thanks, David -- David Wheeler AIM: dwTheory [EMAIL PROTECTED] ICQ: 15726394 Yahoo!: dew7e Jabber: [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Outlook express dbx files
Would be nice if someone could figure them out though. There is a utility to convert them, but it didn't work the way the evolution importers wanted it to, so I ended up not using it, and in the end I never had time to write the OE5 one. I think the program is called oe2mbox. iain -- Hope (n): The theological virtue defined as the desire and search for a future good, difficult but not impossible to attain with God's help. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Pilot conduits are busted now, too...
Yes, this is what happens if you compile Evolution with pilot conduits using libtool 1.4 with PeterW's performance patch (because libtool 1.4 sucks rocks). Did you install via RPMs or compile yourself? Dan On Wed, 2001-11-14 at 18:27, Rubin Bennett wrote: Arrgh... shoulda left 0.16 on my machine... everything was working OK then. Alright, enough sniffling- In addition to the cannot allocate default font for printing error that I'm still getting, now the EAddress conduit for syncing with my Handspring is dead. Arrgh; everything else is working; it syncs up my ToDo list, Calendar, etc., but no addresses. Below is the error that gets dumped to the console both upon pressing the HotSync button and trying to edit the EAddress conduit in gnomecc. Any ideas? Thanks in advance. libgpilotdcm-WARNING **: unable to g_module_open (/usr/lib/gnome-pilot/conduits/libeaddress_conduit.so), reason /usr/lib/gnome-pilot/conduits/libeaddress_conduit.so: undefined symbol: g_unichar_isalpha -- Rubin Bennett President, Complete Connection, Inc. (802) 223-4448 [EMAIL PROTECTED] http://www.completeconnection.com ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] Transfer of data
Hello, which are the relevant files if I want to transfer lets say the ToDo Database from one computer to another? I tried just to copy ~/evolution/local/Tasks/tasks.ics but evolution doesn't accept this file. It just replaces the file automatically with the original one. So there must be a backup mechanism in the background which I don't understand. I didn't find anything in the documentation. By the way, is this the right place to ask such questions? I asked the same question in [EMAIL PROTECTED] but got no answer there. Thanks in advance Gerhard Schuck [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] How do I enable spellchecking in Evolution?
On Wed, 2001-11-14 at 12:30, Chris Cooper wrote: Spell-checking works fine. The package you need is called gnome-spell, and it's available in the Ximian Gnome Desktop channel of Red Carpet snip / Unfortunately, I can't get this to work on my Yellow Dog Linux box. I get the following errors in RedHat when I try to install gnome-spell. Package gnome-spell needs package libpspell-impl.so.6 which cannot be found. Package gnome-spell needs package libpspell_aspell.so.2 which cannot be found. Package gnome-spell needs package libpspell.so.4 which cannot be found. Package gnome-spell needs package libaspell.so.10 which cannot be found. Can anyone tell me where to find these packages for YDL? Shouldn't RedCarpet know about them? Thanks, David -- David Wheeler AIM: dwTheory [EMAIL PROTECTED] ICQ: 15726394 Yahoo!: dew7e Jabber: [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] Ouch, that hurt.
I had a very long email I had finished writing, and I set it in the background to look at other email, wanting to go back to check it again before sending it out. Inadvertently pressed the X and closed the main evolution window. I reopened Evolution, and pressed the New Message button, which usually then says something to the effect of I've found drafts, do you want me to recover them and I say yes. Well, I'm running the most recent Snap of RC1, and it didn't do that, so that very well thought out email is now lost, and Im struggling to recreate it. Is there any way to recover it? Please let me know ASAP if there is. and btw, if not, I'd consider that a HUGE bug, If one has a window open with a message written, and upon close, all changes are destroyed, without asking me to save the changes, it's definitely a MAJOR bug :-) TTMS Lloyd ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Pilot conduits are busted now, too...
For what it's worth, I'm seeing the exact same thing using the Debian-potato packages. RC1 was my first attempt at trying to use the evolution conduits. Dave On Wed, 2001-11-14 at 19:27, Rubin Bennett wrote: Arrgh... shoulda left 0.16 on my machine... everything was working OK then. Alright, enough sniffling- In addition to the cannot allocate default font for printing error that I'm still getting, now the EAddress conduit for syncing with my Handspring is dead. Arrgh; everything else is working; it syncs up my ToDo list, Calendar, etc., but no addresses. Below is the error that gets dumped to the console both upon pressing the HotSync button and trying to edit the EAddress conduit in gnomecc. Any ideas? Thanks in advance. libgpilotdcm-WARNING **: unable to g_module_open (/usr/lib/gnome-pilot/conduits/libeaddress_conduit.so), reason /usr/lib/gnome-pilot/conduits/libeaddress_conduit.so: undefined symbol: g_unichar_isalpha -- Rubin Bennett President, Complete Connection, Inc. (802) 223-4448 [EMAIL PROTECTED] http://www.completeconnection.com ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution -- David Royer [EMAIL PROTECTED] PGP Key: 0xD2B7F23C PGP Fingerprint: 0467 2A1D 91F9 38AC 78EB 655F 259A A36F D2B7 F23C ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Reply should come from source account
On Wed, 2001-11-14 at 13:03, Jeffrey Stedfast wrote: It does, but I guess the logic is off a bit or something. I don't know, I can't find the problem... I would love to help locate why this is happening if I can. I find it very annoying. I have a POP account set up for home and an IMAP account at work. When I'm at home, the IMAP account is set to disabled. When I'm at work the POP account is disabled. While I'm at work using IMAP, inside my IMAP tree, it still defaults to my POP profile (it's checked as default). The work around is that I can check the IMAP account as default while IMAP is enabled. So what's my problem? I guess I'd like someday to not have to enable/disable accounts every time I go to work and come home. It would be nice if Evolution could turn the Send / Receive button into a drop down button where I can choose the individual account to Send / Receive from without having to monkey with disabling/enabling accounts (like Mozilla does). If this feature along with defaulting to the right email profile per account tree we added, I could then say Evolution is perfect ;0) This is my wish list anyway. Thanks for listening. -- Steve Fox http://k-lug.org ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] Recognizing Arbitrary Message Quotations (was Re: [Evolution]Changing Quotation String?)
Howdy! It appears that an poorly worded query on my part spawned an interesting topic: how can we recognize arbitrarily quoted messages for purposes of colorization, requoting, and rewrapping? It feels like a potentially worthwhile approach is to spend some time trying to recognize attribution strings; if we could learn to do that, we can infer that the next line is quoted somehow, and start to unravel which quoting strings relate to which attributions. Ideally, we could completely unroll any number of arbitrarily quoted messages, which would allow us to then requote or rewrap tidily. However, this is no more easy than the first problem, and perhaps considerably harder. I'm thinking about this a bit in my spare moments, but to paraphrase ESR, many eyes make light work. ;] Cheers! --j -- Jim Meyer, Geek At Large [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] Latest Download using Red Carpet won't start.
I am just trying to start Evolution on my RH 7.2 box after downloading the latest snapshot using Red Carpet and I'm getting evolution: relocation error: /usr/lib/libevolution-importer.so.0: undefined symbol: stat when I try and start it from the consol (nothing when I start it from the menu). Same happens with either root or user login. Any ideas. Ta Peter. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Latest Download using Red Carpet won't start.
How late is latest? That's been fixed for at least 30 hours. At the very least you should have 2001.11.14.08.58. Luis On Thu, 2001-11-15 at 00:24, Peter Nunn wrote: I am just trying to start Evolution on my RH 7.2 box after downloading the latest snapshot using Red Carpet and I'm getting evolution: relocation error: /usr/lib/libevolution-importer.so.0: undefined symbol: stat when I try and start it from the consol (nothing when I start it from the menu). Same happens with either root or user login. Any ideas. Ta Peter. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Reply should come from source account
On Wed, 2001-11-14 at 19:49, Jeffrey Stedfast wrote: But pretend you are setting up evolution to check mail from your work address and your isp mail address, you'd want both accounts to use your isp's smtp server It's a side point - I agree with the behaviour of 'guessing' an SMTP server; but I do use different SMTP servers at home and work. My ISP's mail server only relays for hosts inside their network, which my work machine isn't, and my work SMTP server does the same. ~C. -- $a=printf.net; Chris Ball | chris@void.$a | www.$a | finger: chris@$a In the beginning there was nothing, which exploded. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
RE: [Evolution] Latest Download using Red Carpet won't start.
Thanks Luis, just getting the latest one (sorry, I didn't check today, it was the latest yesterday).. Thanks again. Peter. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Luis Villa Sent: Thursday, 15 November 2001 4:36 PM To: [EMAIL PROTECTED] Subject: Re: [Evolution] Latest Download using Red Carpet won't start. How late is latest? That's been fixed for at least 30 hours. At the very least you should have 2001.11.14.08.58. Luis On Thu, 2001-11-15 at 00:24, Peter Nunn wrote: I am just trying to start Evolution on my RH 7.2 box after downloading the latest snapshot using Red Carpet and I'm getting evolution: relocation error: /usr/lib/libevolution-importer.so.0: undefined symbol: stat when I try and start it from the consol (nothing when I start it from the menu). Same happens with either root or user login. Any ideas. Ta Peter. ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] still no palm syncing?
On Wed, 2001-11-14 at 13:53, John Sturgeon wrote: I'm still not able to sync with my palm: gpilotd: relocation error: gpilotd: undefined symbol: stat Is this my problem or are there still problems linking in the libraries? I still get this too (not surprising, since the problem comes from either gnome-pilot or pilot-link, and no new Ximian release of those have been made available :-) Richard. -- Richard Bellavance COGNICASE inc. Analyste-programmeur principal Hébergement, sécurité et réseaux T.: 514-732-8000 #4153 20, Place du Commerce F.: 514-732-8021 Verdun, Qc, H3E 1Z6, CANADA ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] Reply should come from source account
On Wed, 2001-11-14 at 11:49, Jeffrey Stedfast wrote: But pretend you are setting up evolution to check mail from your work address and your isp mail address, you'd want both accounts to use your isp's smtp server and if your isp mail address was your default (as it would be if you were setting up your home box), then when you created your work account you'd want it to default to use your isp's smtp server so you wouldn't have to type in the same info all over again. Ahh, you've struck another bit of fun I've been having. Neither my office or my ISP will allow relaying from outside their internal networks; however, both will allow relaying regardless of claimed source address from within their internal networks. This leaves me wishing I could just toggle the outgoing SMTP server for all accounts at once. No mail client has adequately answered this problem yet, in my experience. Cheers! --j, always with the monkey wrench. -- Jim Meyer, Geek At Large [EMAIL PROTECTED] ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] feature disappeared
done. I can see the same behaviour. Can you file a bug report on bugzilla.ximian.com? -- - Dipl. Inf. (FH) Stefan Palme email: [EMAIL PROTECTED] phon: +49 341 3910484 fax: +49 1212 517956219 - msg03159/pgp0.pgp Description: PGP signature
[Evolution] moving folders doesnt always work
hi, I have a problem with the folder list of the mailer component. when I want to move one of my local folders (subfolders of Inbox) into another one, this does not work for all folders. While moving the mouse over the desired destination folder, normally this folder gets a black border around it, and I can drop my folder into it. Now (using evolution 0.99.0) the black box does not appear over all the folders (and of course not over the folder I need ;-)). I've already made a list of folders where it works and where not, but I can not work out any rule, for which folders this happens. best regards -Stefan Palme- -- - Dipl. Inf. (FH) Stefan Palme email: [EMAIL PROTECTED] phon: +49 341 3910484 fax: +49 1212 517956219 - msg03160/pgp0.pgp Description: PGP signature
Re: [Evolution] How do I enable spellchecking in Evolution?
I could be mistaken, but I thought I had to add the gnome-spell rpm to make Evo spell-checking work. (which in turn uses Aspell) Damon. On Wed, 2001-11-14 at 15:16, Brett Johnson wrote: On Wed, 2001-11-14 at 11:46, Mike Strock wrote: Install ASpell . Spell checking is working nicely here. Is spellchecking disabled in the ximian binaries then? I've got aspell installed, yet the spellcheck document... menu item is greyed out (same problem as Kristian). # rpm -qa | grep aspell libaspell10-0.33.7.1-1mdk aspell-en_GB-0.33.7.1-1mdk libaspell10-devel-0.33.7.1-1mdk aspell-0.33.7.1-1mdk On Wed, 2001-11-14 at 10:13, Kristian Sorensen wrote: Hello, I've downloaded Evolution 0.99.0 for RH7.1 using Red Carpet. How do I enable spellchecking? It's not hilited like the other options under Edit. Cheers! -- Brett Johnson [EMAIL PROTECTED] - i n v e n t - ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
Re: [Evolution] How do I enable spellchecking in Evolution?
Then spell-checking is not working for you. Misspelled words should be underlined. I can't get my spell-checking either. I have Mandrake 8.1 also. Funny thing is that I have Mandrake 8.1 on my work machine, and spell-checking is working there. Ujwal On Wed, 2001-11-14 at 12:58, Brett Johnson wrote: On Wed, 2001-11-14 at 13:30, Chris Cooper wrote: Spell-checking works fine. The package you need is called gnome-spell, Thanks for all the replies! I had gnome-spell installed, but it was an earlier version (0.1-7) that came with my distro (Mandrake 8.1). Updating to the ximian version (0.4) fixed the problem, now spiel-cheking works fine! Well, it appears to work anyway, and gives me a false sense of security. (It thinks there are no misspelled word found in this message. Hmm, I've never seen the word glbrftpswq in a dictionary before ;o/ ). glbrftpswq! -- Brett Johnson [EMAIL PROTECTED] - i n v e n t - ___ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
[Evolution] Evolution as news reader
Hi all, Can anyone point me to where I can find more information on configuring Evolution as a newsgroup reader? thanks in advance. Kevyn
