RE: Exchange 5.5 - 2000 Upgrade grief
That worked. Cheers Mark -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Mark Harford Sent: 19 March 2002 15:50 To: Exchange Discussions Subject: RE: Exchange 5.5 - 2000 Upgrade grief Are you able to install Exchange System Manager by itself? If so, drill down to the relevant Administrative Group and pull up the properties. In there you can reselect the Exchange 55 Service Account details that will have been stored in Active Directory the first time you tried installing Exchange 2000. If you can not install Exchange System Manager then you could test the following in a lab scenario [1]:- Run up ADSIEDIT and connect to the Configuration Container for your Forest. Drill down to Services, Microsoft Exchange, Org Name, Administrative Groups, Site Name. Right click, properties, Scroll down and check... msExchLegacyAccount msExchLegacyDomain Correct them if necessary [2] Then when running setup again you can enter in the correct password. Mark [1] I have not tested this myself so can not vouch for it at all. [2] as per [1] -Original Message- From: Alister [mailto:[EMAIL PROTECTED]] Sent: 19 March 2002 15:13 To: Exchange Discussions Subject: RE: Exchange 5.5 - 2000 Upgrade grief Hi Well, I tried that and still no joy. I've verified that the ADC is working correctly and security is correct as per Q250989. AD has all Ex 5.5 information. Any Idea why I can't enter the Service Account info in Ex2k setup when I try and introduce a new server?? Thanks Ali -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Daniel Chenault Sent: 13 March 2002 15:53 To: Exchange Discussions Subject: Re: Exchange 5.5 - 2000 Upgrade grief I just ran into something like this very recently. On the 5.5 box open the Services and get properties on each Exchange service. Manually enter 'domain\username' and restart the services. Yes, I know, sounds weird. But it works. - Original Message - From: Alister [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Wednesday, March 13, 2002 9:22 AM Subject: RE: Exchange 5.5 - 2000 Upgrade grief We Only have a W2K domain. 5.5 was installed at the time because 2000 wasn't available. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Grant, Fred Sent: 13 March 2002 15:19 To: Exchange Discussions Subject: RE: Exchange 5.5 - 2000 Upgrade grief Have you created trusts between the W2K domain you are installing E2K in and the NT domain that 5.5 is in? If you verify the trust, is it successful? -Original Message- From: Alister [mailto:[EMAIL PROTECTED]] Sent: Wednesday, March 13, 2002 9:11 AM To: Exchange Discussions Subject: RE: Exchange 5.5 - 2000 Upgrade grief Yes this rings a nasty bell. First time I tried and install 2000 it seemed OK, however I could not access the 5.5 information store. At that time I was not 100% sure the ADC was correct. I removed Windows 2000 and Exchange 2000 and started again. Running ADC on the 5.5 box. Now I the greyed out section for the user name and domain. The password for the Service Account Information is not being excepted Have I got the wrong info in the Schema for Service Account??? I thought the Schema was only a template??? Thanks Alister -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Grant, Fred Sent: 12 March 2002 21:13 To: Exchange Discussions Subject: RE: Exchange 5.5 - 2000 Upgrade grief During an earlier step you would have been asked for the name of a server in 5.5. Based on that info the setup program can determine the site the server is in and hence the SA account for that site. That is what is presented in the greyed out section. You now need to provide the PW associated with that account. -Original Message- From: Alister [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 12, 2002 11:45 AM To: Exchange Discussions Subject: Exchange 5.5 - 2000 Upgrade grief Hi Guys. I'm new to this forum, so if you've covered this sorry to drag it up again. When trying to install a second exchange server, with Exchange 2000 on it. Our Existing server has 5.5. I've run the ADC (I think correctly). There is Exchange stuff in the Schema, but when I run Exchange 2000 setup (on a different server), and come to the part about entering Service Account Information both the User Name and Domain and greyed out Only the password field is available for entry Anybody any thoughts??? Thanks Ali Network Engineer bango.net This e-mail (and any attachments) is confidential and may contain personal views which are not the views of the BBC unless specifically stated. If you have received it in error, please delete it from your system, do not use
RE: Exchange 5.5 - 2000 Upgrade grief
Hi Well, I tried that and still no joy. I've verified that the ADC is working correctly and security is correct as per Q250989. AD has all Ex 5.5 information. Any Idea why I can't enter the Service Account info in Ex2k setup when I try and introduce a new server?? Thanks Ali -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Daniel Chenault Sent: 13 March 2002 15:53 To: Exchange Discussions Subject: Re: Exchange 5.5 - 2000 Upgrade grief I just ran into something like this very recently. On the 5.5 box open the Services and get properties on each Exchange service. Manually enter 'domain\username' and restart the services. Yes, I know, sounds weird. But it works. - Original Message - From: Alister [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Wednesday, March 13, 2002 9:22 AM Subject: RE: Exchange 5.5 - 2000 Upgrade grief We Only have a W2K domain. 5.5 was installed at the time because 2000 wasn't available. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Grant, Fred Sent: 13 March 2002 15:19 To: Exchange Discussions Subject: RE: Exchange 5.5 - 2000 Upgrade grief Have you created trusts between the W2K domain you are installing E2K in and the NT domain that 5.5 is in? If you verify the trust, is it successful? -Original Message- From: Alister [mailto:[EMAIL PROTECTED]] Sent: Wednesday, March 13, 2002 9:11 AM To: Exchange Discussions Subject: RE: Exchange 5.5 - 2000 Upgrade grief Yes this rings a nasty bell. First time I tried and install 2000 it seemed OK, however I could not access the 5.5 information store. At that time I was not 100% sure the ADC was correct. I removed Windows 2000 and Exchange 2000 and started again. Running ADC on the 5.5 box. Now I the greyed out section for the user name and domain. The password for the Service Account Information is not being excepted Have I got the wrong info in the Schema for Service Account??? I thought the Schema was only a template??? Thanks Alister -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Grant, Fred Sent: 12 March 2002 21:13 To: Exchange Discussions Subject: RE: Exchange 5.5 - 2000 Upgrade grief During an earlier step you would have been asked for the name of a server in 5.5. Based on that info the setup program can determine the site the server is in and hence the SA account for that site. That is what is presented in the greyed out section. You now need to provide the PW associated with that account. -Original Message- From: Alister [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 12, 2002 11:45 AM To: Exchange Discussions Subject: Exchange 5.5 - 2000 Upgrade grief Hi Guys. I'm new to this forum, so if you've covered this sorry to drag it up again. When trying to install a second exchange server, with Exchange 2000 on it. Our Existing server has 5.5. I've run the ADC (I think correctly). There is Exchange stuff in the Schema, but when I run Exchange 2000 setup (on a different server), and come to the part about entering Service Account Information both the User Name and Domain and greyed out Only the password field is available for entry Anybody any thoughts??? Thanks Ali Network Engineer bango.net _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com
RE: Exchange 5.5 - 2000 Upgrade grief
We Only have a W2K domain. 5.5 was installed at the time because 2000 wasn't available. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Grant, Fred Sent: 13 March 2002 15:19 To: Exchange Discussions Subject: RE: Exchange 5.5 - 2000 Upgrade grief Have you created trusts between the W2K domain you are installing E2K in and the NT domain that 5.5 is in? If you verify the trust, is it successful? -Original Message- From: Alister [mailto:[EMAIL PROTECTED]] Sent: Wednesday, March 13, 2002 9:11 AM To: Exchange Discussions Subject: RE: Exchange 5.5 - 2000 Upgrade grief Yes this rings a nasty bell. First time I tried and install 2000 it seemed OK, however I could not access the 5.5 information store. At that time I was not 100% sure the ADC was correct. I removed Windows 2000 and Exchange 2000 and started again. Running ADC on the 5.5 box. Now I the greyed out section for the user name and domain. The password for the Service Account Information is not being excepted Have I got the wrong info in the Schema for Service Account??? I thought the Schema was only a template??? Thanks Alister -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Grant, Fred Sent: 12 March 2002 21:13 To: Exchange Discussions Subject: RE: Exchange 5.5 - 2000 Upgrade grief During an earlier step you would have been asked for the name of a server in 5.5. Based on that info the setup program can determine the site the server is in and hence the SA account for that site. That is what is presented in the greyed out section. You now need to provide the PW associated with that account. -Original Message- From: Alister [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 12, 2002 11:45 AM To: Exchange Discussions Subject: Exchange 5.5 - 2000 Upgrade grief Hi Guys. I'm new to this forum, so if you've covered this sorry to drag it up again. When trying to install a second exchange server, with Exchange 2000 on it. Our Existing server has 5.5. I've run the ADC (I think correctly). There is Exchange stuff in the Schema, but when I run Exchange 2000 setup (on a different server), and come to the part about entering Service Account Information both the User Name and Domain and greyed out Only the password field is available for entry Anybody any thoughts??? Thanks Ali Network Engineer bango.net _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Exchange 2000 in 5.5 Site
Gameplan as in populate AD??? I'm not sure what you mean by F/B. I can't remove the 5.5 box at the mo, as it is our main mail server. I need to get a Ex2000 box running in parallel first, hence my prob's. Thanks Ali -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Daniel Chenault Sent: 13 March 2002 15:54 To: Exchange Discussions Subject: Re: Exchange 2000 in 5.5 Site That would mean the F/B folder is not populated. At the moment that F/B server is hosted on the 5.5 box. To simplify troubleshooting follow the gameplan of removing the 5.5 box and we'll go from there. - Original Message - From: McCullar, Doug [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Wednesday, March 13, 2002 9:23 AM Subject: RE: Exchange 2000 in 5.5 Site It is just blank where before you could see there busy times in blue. -Original Message- From: Daniel Chenault [mailto:[EMAIL PROTECTED]] Sent: Wednesday, March 13, 2002 9:21 AM To: Exchange Discussions Subject: Re: Exchange 2000 in 5.5 Site Follow that article and you'll be fine. What is meant by users can't see others' schedules? Is there an error message or do you mean they open the schedule but it is blank when you know there should be info there? - Original Message - From: McCullar, Doug [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Wednesday, March 13, 2002 8:32 AM Subject: RE: Exchange 2000 in 5.5 Site I have the article Q284148 on removing the last 5.5 server. All attendees, all of the time. -Original Message- From: Daniel Chenault [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 12, 2002 9:38 PM To: Exchange Discussions Subject: Re: Exchange 2000 in 5.5 Site Yes, this list is a resource. Trust me on this; you'll get better responses if you outline what you've already done; without saying that no one is going to be interested in doing what looks like your work for you. You raised two issues 1. Removing the last 5.5 server. This server hosts some essential services; follow the KB on removing the first server in the site 2. All attendees, some attendees, specific ones all the time, random? - Original Message - From: McCullar, Doug [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Tuesday, March 12, 2002 8:55 PM Subject: RE: Exchange 2000 in 5.5 Site I did check that out but must be my mistake. I thought that was what this list was for too. -Original Message- From: Daniel Chenault [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 12, 2002 4:14 PM To: Exchange Discussions Subject: Re: Exchange 2000 in 5.5 Site It just so happens that MS has a paper or two on exactly this procedure. You might check their website (which should have been your first option instead of this list). - Original Message - From: McCullar, Doug [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Monday, March 11, 2002 2:04 PM Subject: Exchange 2000 in 5.5 Site I have joined a 5.5 site with an Exchange 2000 server. Everything seems to be working fine and I think I am close to removing the 5.5 server. Is there anything I need to do or maybe a white paper I can ready before I proceed? Also, my users are having problem with not being able to see the schedules for attendees when trying to schedule meetings. Any help would be much appreciate and thanks in advance. _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives:
Exchange 5.5 - 2000 Upgrade grief
Hi Guys. I'm new to this forum, so if you've covered this sorry to drag it up again. When trying to install a second exchange server, with Exchange 2000 on it. Our Existing server has 5.5. I've run the ADC (I think correctly). There is Exchange stuff in the Schema, but when I run Exchange 2000 setup (on a different server), and come to the part about entering Service Account Information both the User Name and Domain and greyed out Only the password field is available for entry Anybody any thoughts??? Thanks Ali Network Engineer bango.net _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Exchange 5.5 - 2000 Upgrade grief
Hi Guys. I'm new to this forum, so if you've covered this sorry to drag it up again. When trying to install a second exchange server, with Exchange 2000 on it. Our Existing server has 5.5. I've run the ADC (I think correctly). There is Exchange stuff in the Schema, but when I run Exchange 2000 setup (on a different server), and come to the part about entering Service Account Information both the User Name and Domain and greyed out Only the password field is available for entry Anybody any thoughts??? Thanks Ali Network Engineer bango.net _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
