RE: E2K and E2K RC1
Trying to remember. But I think it has to do with if your in Ad Native mode or not and or in a mixed Exchange environment or not. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leeann McCallum Sent: Monday, March 10, 2003 9:02 PM To: Exchange Discussions I was reading an article by Tony Redmond http://www.exchangeadmin.com/articles/print.cfm?articleID=8743 which seems to indicate that is was possible to move servers between Administrative Groups in RC1, yet according to everything else I've read, including Ed, this is no longer possible in E2K SP3. Anyone know why this was taken out? I don't think I'm going to enjoy my migration as much as I had hoped. Rgds, Leeann NOTICE - This e-mail is only intended to be read by the named recipient. It may contain information which is confidential, proprietary or the subject of legal privilege. If you are not the intended recipient please notify the sender immediately and delete this e-mail. You may not use any information contained in it. Legal privilege is not waived because you have read this e-mail. For further information on the Beca Group of Companies, visit our web page http://www.beca.co.nz _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: E2K and E2K RC1
Info I've seen says that regardless of whether you are in native or mixed, you still cannot move E2K servers betwixt AG's. You can however, move mailboxes between AG's in native. -Original Message- From: Tony Hlabse [mailto:[EMAIL PROTECTED] Sent: Tuesday, 11 March 2003 3:08 p.m. To: Exchange Discussions Subject: RE: E2K and E2K RC1 Trying to remember. But I think it has to do with if your in Ad Native mode or not and or in a mixed Exchange environment or not. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leeann McCallum Sent: Monday, March 10, 2003 9:02 PM To: Exchange Discussions I was reading an article by Tony Redmond http://www.exchangeadmin.com/articles/print.cfm?articleID=8743 which seems to indicate that is was possible to move servers between Administrative Groups in RC1, yet according to everything else I've read, including Ed, this is no longer possible in E2K SP3. Anyone know why this was taken out? I don't think I'm going to enjoy my migration as much as I had hoped. Rgds, Leeann NOTICE - This e-mail is only intended to be read by the named recipient. It may contain information which is confidential, proprietary or the subject of legal privilege. If you are not the intended recipient please notify the sender immediately and delete this e-mail. You may not use any information contained in it. Legal privilege is not waived because you have read this e-mail. For further information on the Beca Group of Companies, visit our web page http://www.beca.co.nz _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] NOTICE - This e-mail is only intended to be read by the named recipient. It may contain information which is confidential, proprietary or the subject of legal privilege. If you are not the intended recipient please notify the sender immediately and delete this e-mail. You may not use any information contained in it. Legal privilege is not waived because you have read this e-mail. For further information on the Beca Group of Companies, visit our web page http://www.beca.co.nz _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: E2K and E2K RC1
Well I remember this coming up a while back. You might want to check the archives. When I get to work tomorrow, one of MS's Exchange gurus will be in. I'll ask him. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leeann McCallum Sent: Monday, March 10, 2003 9:09 PM To: Exchange Discussions Info I've seen says that regardless of whether you are in native or mixed, you still cannot move E2K servers betwixt AG's. You can however, move mailboxes between AG's in native. -Original Message- From: Tony Hlabse [mailto:[EMAIL PROTECTED] Sent: Tuesday, 11 March 2003 3:08 p.m. To: Exchange Discussions Subject: RE: E2K and E2K RC1 Trying to remember. But I think it has to do with if your in Ad Native mode or not and or in a mixed Exchange environment or not. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leeann McCallum Sent: Monday, March 10, 2003 9:02 PM To: Exchange Discussions I was reading an article by Tony Redmond http://www.exchangeadmin.com/articles/print.cfm?articleID=8743 which seems to indicate that is was possible to move servers between Administrative Groups in RC1, yet according to everything else I've read, including Ed, this is no longer possible in E2K SP3. Anyone know why this was taken out? I don't think I'm going to enjoy my migration as much as I had hoped. Rgds, Leeann NOTICE - This e-mail is only intended to be read by the named recipient. It may contain information which is confidential, proprietary or the subject of legal privilege. If you are not the intended recipient please notify the sender immediately and delete this e-mail. You may not use any information contained in it. Legal privilege is not waived because you have read this e-mail. For further information on the Beca Group of Companies, visit our web page http://www.beca.co.nz _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] NOTICE - This e-mail is only intended to be read by the named recipient. It may contain information which is confidential, proprietary or the subject of legal privilege. If you are not the intended recipient please notify the sender immediately and delete this e-mail. You may not use any information contained in it. Legal privilege is not waived because you have read this e-mail. For further information on the Beca Group of Companies, visit our web page http://www.beca.co.nz _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: E2K and E2K RC1
Moving servers between admin groups was something they attempted in the betas but coul dnot make work. Even with Exchange 2000 in native mode, all objects have a legacyExchangeDN associated with them. If I remember correctly, this was the reason that the decided it was going to be too difficult to get working. Like Tony, I don't remember the exact reason, but I'm thinking that was it. I remember doing it a few times in Beta 3 and causing myself a lot of headaches (stores would not mount). If you are hoping to "re-architect" your organization, once you are in native mode you CAN move mailboxes between servers in different admin groups. If this is what you want to accomplish, then perhaps this is the best approach. HTH, Jim -Original Message- From: Leeann McCallum [mailto:[EMAIL PROTECTED] Posted At: Monday, March 10, 2003 4:02 PM Posted To: Exchange Technical Mailing List Conversation: E2K and E2K RC1 Subject: E2K and E2K RC1 I was reading an article by Tony Redmond http://www.exchangeadmin.com/articles/print.cfm?articleID=8743 which seems to indicate that is was possible to move servers between Administrative Groups in RC1, yet according to everything else I've read, including Ed, this is no longer possible in E2K SP3. Anyone know why this was taken out? I don't think I'm going to enjoy my migration as much as I had hoped. Rgds, Leeann NOTICE - This e-mail is only intended to be read by the named recipient. It may contain information which is confidential, proprietary or the subject of legal privilege. If you are not the intended recipient please notify the sender immediately and delete this e-mail. You may not use any information contained in it. Legal privilege is not waived because you have read this e-mail. For further information on the Beca Group of Companies, visit our web page http://www.beca.co.nz _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: E2K and E2K RC1
Thanks Jim, We do want to collapse all our sites into one AG, but we can only achieve this by using a 2-hop method as Ed has mentioned in a previous post a few weeks back. Install E2K in each site, remove 5.5, switch to native, install E2K into desired AG and move mailboxes from original site. I started questioning it again when I re-read Tony's article, AND after a discussion I had with Microsoft last week who also indicated that I could simply install my E2K servers in each site, and then 'collapse them' in a single hop. -Original Message- From: McBee, Jim [mailto:[EMAIL PROTECTED] Sent: Tuesday, 11 March 2003 5:50 p.m. To: Exchange Discussions Subject: RE: E2K and E2K RC1 Moving servers between admin groups was something they attempted in the betas but coul dnot make work. Even with Exchange 2000 in native mode, all objects have a legacyExchangeDN associated with them. If I remember correctly, this was the reason that the decided it was going to be too difficult to get working. Like Tony, I don't remember the exact reason, but I'm thinking that was it. I remember doing it a few times in Beta 3 and causing myself a lot of headaches (stores would not mount). If you are hoping to "re-architect" your organization, once you are in native mode you CAN move mailboxes between servers in different admin groups. If this is what you want to accomplish, then perhaps this is the best approach. HTH, Jim -Original Message- From: Leeann McCallum [mailto:[EMAIL PROTECTED] Posted At: Monday, March 10, 2003 4:02 PM Posted To: Exchange Technical Mailing List Conversation: E2K and E2K RC1 Subject: E2K and E2K RC1 I was reading an article by Tony Redmond http://www.exchangeadmin.com/articles/print.cfm?articleID=8743 which seems to indicate that is was possible to move servers between Administrative Groups in RC1, yet according to everything else I've read, including Ed, this is no longer possible in E2K SP3. Anyone know why this was taken out? I don't think I'm going to enjoy my migration as much as I had hoped. Rgds, Leeann NOTICE - This e-mail is only intended to be read by the named recipient. It may contain information which is confidential, proprietary or the subject of legal privilege. If you are not the intended recipient please notify the sender immediately and delete this e-mail. You may not use any information contained in it. Legal privilege is not waived because you have read this e-mail. For further information on the Beca Group of Companies, visit our web page http://www.beca.co.nz _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] NOTICE - This e-mail is only intended to be read by the named recipient. It may contain information which is confidential, proprietary or the subject of legal privilege. If you are not the intended recipient please notify the sender immediately and delete this e-mail. You may not use any information contained in it. Legal privilege is not waived because you have read this e-mail. For further information on the Beca Group of Companies, visit our web page http://www.beca.co.nz _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: E2K and E2K RC1
The Exchange guru from MS states that you can not move servers from one Admin group to another. Hope this helps you. From: Leeann McCallum <[EMAIL PROTECTED]> Reply-To: "Exchange Discussions" <[EMAIL PROTECTED]> To: "Exchange Discussions" <[EMAIL PROTECTED]> Subject: RE: E2K and E2K RC1 Date: Tue, 11 Mar 2003 18:15:12 +1300 Thanks Jim, We do want to collapse all our sites into one AG, but we can only achieve this by using a 2-hop method as Ed has mentioned in a previous post a few weeks back. Install E2K in each site, remove 5.5, switch to native, install E2K into desired AG and move mailboxes from original site. I started questioning it again when I re-read Tony's article, AND after a discussion I had with Microsoft last week who also indicated that I could simply install my E2K servers in each site, and then 'collapse them' in a single hop. -Original Message- From: McBee, Jim [mailto:[EMAIL PROTECTED] Sent: Tuesday, 11 March 2003 5:50 p.m. To: Exchange Discussions Subject: RE: E2K and E2K RC1 Moving servers between admin groups was something they attempted in the betas but coul dnot make work. Even with Exchange 2000 in native mode, all objects have a legacyExchangeDN associated with them. If I remember correctly, this was the reason that the decided it was going to be too difficult to get working. Like Tony, I don't remember the exact reason, but I'm thinking that was it. I remember doing it a few times in Beta 3 and causing myself a lot of headaches (stores would not mount). If you are hoping to "re-architect" your organization, once you are in native mode you CAN move mailboxes between servers in different admin groups. If this is what you want to accomplish, then perhaps this is the best approach. HTH, Jim -Original Message- From: Leeann McCallum [mailto:[EMAIL PROTECTED] Posted At: Monday, March 10, 2003 4:02 PM Posted To: Exchange Technical Mailing List Conversation: E2K and E2K RC1 Subject: E2K and E2K RC1 I was reading an article by Tony Redmond http://www.exchangeadmin.com/articles/print.cfm?articleID=8743 which seems to indicate that is was possible to move servers between Administrative Groups in RC1, yet according to everything else I've read, including Ed, this is no longer possible in E2K SP3. Anyone know why this was taken out? I don't think I'm going to enjoy my migration as much as I had hoped. Rgds, Leeann NOTICE - This e-mail is only intended to be read by the named recipient. It may contain information which is confidential, proprietary or the subject of legal privilege. If you are not the intended recipient please notify the sender immediately and delete this e-mail. You may not use any information contained in it. Legal privilege is not waived because you have read this e-mail. For further information on the Beca Group of Companies, visit our web page http://www.beca.co.nz _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] NOTICE - This e-mail is only intended to be read by the named recipient. It may contain information which is confidential, proprietary or the subject of legal privilege. If you are not the intended recipient please notify the sender immediately and delete this e-mail. You may not use any information contained in it. Legal privilege is not waived because you have read this e-mail. For further information on the Beca Group of Companies, visit our web page http://www.beca.co.nz _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ Help STOP SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]